My Goflex Net is dead?

[bx6768]

Hi guys, I need your help. I have a Goflex Net, and installed linux on SATA HD by following this instruction: http://archlinuxarm.org/platforms/armv5 ... goflex-net

Everything is working very well until one day after the power outrage. When I connect the power, the green led blink for 10-20 sec, then change to solid as normal, however I can not see this linux from network. I used set the ip as 192.168.1.10, now can not ping it, and no logging in router status page.

So my Goflex is dead or still can be fixed?

Thanks

[cref]

I'm also a newbie here, but I think maybe u should check the startup message. Connected the goflex net and your computer with same router, set 10.10.10.4 as your IP address, open a terminal in OSX or Linux, and type in "nc -luk 10.10.10.4 6666" and enter, reboot your goflex net and you should see kernel message in your terminal. Hope that would help u to know what happened. You can find more details in advance part of "http://archlinuxarm.org/platforms/armv5/seagate-goflex-net".