[Resolved] Little Help with Unbricking

[Oogbored]

[root@alarm ~]# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.10-18-ARCH (nobody@panda1) (gcc version 4.7.2 (GCC) ) #1 PREEMPT Thu Apr 18 00:45:32 UTC 2013
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Seagate FreeAgent DockStar
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c0590af8, node_mem_map c0661000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext3 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 122868k/122868k available, 8204k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfe800000 ( 864 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc052ede4 (5276 kB)
[ 0.000000] .init : 0xc052f000 - 0xc055a000 ( 172 kB)
[ 0.000000] .data : 0xc055a000 - 0xc05932f0 ( 229 kB)
[ 0.000000] .bss : 0xc0593314 - 0xc0660e8c ( 823 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[ 0.000000] Console: colour dummy device 80x30
[ 5.588779] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 5.678709] pid_max: default: 32768 minimum: 301
[ 5.678833] Security Framework initialized
[ 5.678857] AppArmor: AppArmor disabled by boot time parameter
[ 5.678922] Mount-cache hash table entries: 512
[ 5.679313] Initializing cgroup subsys cpuacct
[ 5.679341] Initializing cgroup subsys memory
[ 5.679378] Initializing cgroup subsys devices
[ 5.679390] Initializing cgroup subsys freezer
[ 5.679399] Initializing cgroup subsys net_cls
[ 5.679408] Initializing cgroup subsys blkio
[ 5.679431] Initializing cgroup subsys perf_event
[ 5.679450] Initializing cgroup subsys bfqio
[ 5.679543] CPU: Testing write buffer coherency: ok
[ 5.680819] devtmpfs: initialized
[ 5.682655] NET: Registered protocol family 16
[ 5.683307] Kirkwood: MV88F6281-A1, TCLK=200000000.
[ 5.683322] Feroceon L2: Enabling L2
[ 5.683360] Feroceon L2: Cache support initialised.
[ 5.683880] initial MPP regs: 01111111 11113322 00001111 00100000 00000000 00000000 00000000
[ 5.683909] final MPP regs: 01111111 11113322 00001111 00000000 00000000 00000000 00000000
[ 5.688950] bio: create slab <bio-0> at 0
[ 5.689316] vgaarb: loaded
[ 5.689582] SCSI subsystem initialized
[ 5.689739] libata version 3.00 loaded.
[ 5.689954] usbcore: registered new interface driver usbfs
[ 5.690052] usbcore: registered new interface driver hub
[ 5.690158] usbcore: registered new device driver usb
[ 5.690715] Switching to clocksource orion_clocksource
[ 5.698711] Switched to NOHz mode on CPU #0
[ 5.699680] FS-Cache: Loaded
[ 5.709497] NET: Registered protocol family 2
[ 5.709741] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 5.710454] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 5.710555] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 5.710608] TCP: Hash tables configured (established 4096 bind 4096)
[ 5.710618] TCP reno registered
[ 5.710629] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 5.710652] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 5.710933] NET: Registered protocol family 1
[ 5.710969] PCI: CLS 0 bytes, default 32
[ 5.711559] audit: initializing netlink socket (disabled)
[ 5.711593] type=2000 audit(0.120:1): initialized
[ 5.796079] VFS: Disk quotas dquot_6.5.2
[ 5.796354] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.798579] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 5.799910] aufs 3.1-20111107
[ 5.799932] msgmni has been set to 239
[ 5.801321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 5.801338] io scheduler noop registered
[ 5.801346] io scheduler deadline registered
[ 5.801427] io scheduler cfq registered
[ 5.801498] io scheduler bfq registered (default)
[ 5.801561] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[ 5.801594] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[ 5.840795] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 5.880807] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[ 5.920794] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[ 5.960794] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[ 5.965873] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.986576] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 6.532778] console [ttyS0] enabled
[ 6.542418] brd: module loaded
[ 6.548506] loop: module loaded
[ 6.552684] NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bit)
[ 6.561373] Scanning device for bad blocks
[ 6.718681] 4 cmdlinepart partitions found on MTD device orion_nand
[ 6.724995] Creating 4 MTD partitions on "orion_nand":
[ 6.730162] 0x000000000000-0x000000100000 : "u-boot"
[ 6.735514] 0x000000100000-0x000000500000 : "uImage"
[ 6.740830] 0x000000500000-0x000002500000 : "rootfs"
[ 6.746152] 0x000002500000-0x000010000000 : "data"
[ 6.752246] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 6.759152] mv643xx_eth smi: probed
[ 6.764835] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 02:50:43:a1:7d:d3
[ 6.773816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.780415] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 6.785772] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 6.820768] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 6.840762] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 6.847308] hub 1-0:1.0: USB hub found
[ 6.851117] hub 1-0:1.0: 1 port detected
[ 6.855567] Initializing USB Mass Storage driver...
[ 6.860553] usbcore: registered new interface driver usb-storage
[ 6.866614] USB Mass Storage support registered.
[ 6.871350] usbcore: registered new interface driver libusual
[ 6.877425] mousedev: PS/2 mouse device common for all mice
[ 6.883281] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 6.889259] sdhci: Secure Digital Host Controller Interface driver
[ 6.895494] sdhci: Copyright(c) Pierre Ossman
[ 6.899938] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.905757] Registered led device: status:green:health
[ 6.911022] Registered led device: status:orange:fault
[ 6.916376] usbcore: registered new interface driver r8712u
[ 6.922880] GRE over IPv4 demultiplexor driver
[ 6.927296] TCP cubic registered
[ 6.930718] NET: Registered protocol family 17
[ 6.935288] lib80211: common routines for IEEE802.11 drivers
[ 6.940993] lib80211_crypt: registered algorithm 'NULL'
[ 6.946238] Registering the dns_resolver key type
[ 6.951096] Gating clock of unused units
[ 6.955036] before: 0x00dfc3fd
[ 6.958106] after: 0x00c701c9
[ 6.961743] registered taskstats version 1
[ 6.966501] netconsole: local port 6665
[ 6.970358] netconsole: local IP 10.10.10.3
[ 6.974591] netconsole: interface 'eth0'
[ 6.978527] netconsole: remote port 6666
[ 6.982484] netconsole: remote IP 10.10.10.4
[ 6.986769] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 6.992906] netconsole: device eth0 not up yet, forcing it
[ 7.180760] usb 1-1: new high speed USB device number 2 using orion-ehci
[ 7.374584] scsi0 : usb-storage 1-1:1.0
[ 8.371973] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
[ 8.381012] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.387044] sd 0:0:0:0: [sda] 2068480 512-byte logical blocks: (1.05 GB/1010 MiB)
[ 8.395142] sd 0:0:0:0: [sda] Write Protect is off
[ 8.399962] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 8.405518] sd 0:0:0:0: [sda] No Caching mode page present
[ 8.411201] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.419766] sd 0:0:0:0: [sda] No Caching mode page present
[ 8.425306] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.572386] sda: sda1
[ 8.576892] sd 0:0:0:0: [sda] No Caching mode page present
[ 8.582434] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.588557] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.624531] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 8.635498] console [netcon0] enabled
[ 8.639277] netconsole: network logging started
[ 8.644139] rtc-mv rtc-mv: setting system clock to 2013-05-29 08:58:15 UTC (1369817895)
[ 8.652512] Waiting 10sec before mounting root device...
[ 18.662161] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 33.325053] EXT4-fs (sda1): recovery complete
[ 33.330908] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.338656] VFS: Mounted root (ext3 filesystem) on device 8:1.
[ 33.345955] devtmpfs: mounted
[ 33.349489] Freeing init memory: 172K
[ 33.800928] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 33.845629] systemd[1]: Failed to insert module 'autofs4'
[ 33.851373] systemd[1]: Failed to insert module 'ipv6'
[ 33.858016] systemd[1]: Set hostname to <alarm>.
[ 34.085236] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 34.107750] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 34.115904] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 34.123669] systemd[1]: Expecting device dev-ttyS0.device...
[ 34.150887] systemd[1]: Starting Remote File Systems.
[ 34.170845] systemd[1]: Reached target Remote File Systems.
[ 34.176543] systemd[1]: Starting Syslog Socket.
[ 34.200845] systemd[1]: Listening on Syslog Socket.
[ 34.205851] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 34.230844] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 34.237505] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 34.260841] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 34.267934] systemd[1]: Starting LVM2 metadata daemon socket.
[ 34.290840] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 34.297064] systemd[1]: Starting Delayed Shutdown Socket.
[ 34.320840] systemd[1]: Listening on Delayed Shutdown Socket.
[ 34.327036] systemd[1]: Starting udev Kernel Socket.
[ 34.350847] systemd[1]: Listening on udev Kernel Socket.
[ 34.356558] systemd[1]: Starting udev Control Socket.
[ 34.380845] systemd[1]: Listening on udev Control Socket.
[ 34.386402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 34.394745] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 34.402822] systemd[1]: Starting Paths.
[ 34.420842] systemd[1]: Reached target Paths.
[ 34.425315] systemd[1]: Starting Encrypted Volumes.
[ 34.450835] systemd[1]: Reached target Encrypted Volumes.
[ 34.456372] systemd[1]: Starting Journal Socket.
[ 34.480843] systemd[1]: Listening on Journal Socket.
[ 34.486017] systemd[1]: Mounting POSIX Message Queue File System...
[ 34.551942] systemd[1]: Starting Create static device nodes in /dev...
[ 34.621717] systemd[1]: Starting udev Coldplug all Devices...
[ 34.700539] systemd[1]: Starting Apply Kernel Variables...
[ 34.761609] systemd[1]: Mounted Huge Pages File System.
[ 34.767007] systemd[1]: Mounting Debug File System...
[ 34.831152] systemd[1]: Starting Journal Service...
[ 34.920954] systemd[1]: Started Journal Service.
[ 34.926457] systemd[1]: Starting Setup Virtual Console...
[ 34.991454] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 35.000353] systemd[1]: Failed to open /dev/autofs: No such file or directory
[ 35.020542] systemd[1]: Failed to initialize automounter: No such file or directory
[ 35.070931] systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
[ 35.081407] systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state.
[ 35.093201] systemd[1]: Started Set Up Additional Binary Formats.
[ 35.103073] systemd[1]: Started Load Kernel Modules.
[ 35.108205] systemd[1]: Mounted Configuration File System.
[ 35.113890] systemd[1]: Mounted FUSE Control File System.
[ 35.119403] systemd[1]: Starting Swap.
[ 35.141533] systemd[1]: Reached target Swap.
[ 35.146649] systemd[1]: Mounting Temporary Directory...
[ 35.241202] systemd[1]: Started File System Check on Root Device.
[ 35.253331] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 35.360967] systemd[1]: Mounted POSIX Message Queue File System.
[ 35.420945] systemd[1]: Started Create static device nodes in /dev.
[ 35.520975] systemd[1]: Started Apply Kernel Variables.
[ 35.551013] systemd[1]: Mounted Debug File System.
[ 35.580946] systemd[1]: Mounted Temporary Directory.
[ 35.640867] systemd[1]: Started Remount Root and Kernel File Systems.
[ 35.700863] systemd[1]: Started Setup Virtual Console.
[ 35.760859] systemd[1]: Started udev Coldplug all Devices.
[ 35.766583] systemd[1]: Starting Load Random Seed...
[ 35.832264] systemd[1]: Starting udev Kernel Device Manager...
[ 35.905108] systemd-udevd[72]: starting version 204
[ 35.940953] systemd[1]: Started Load Random Seed.
[ 35.970939] systemd[1]: Started udev Kernel Device Manager.
[ 35.976784] systemd[1]: Starting Local File Systems (Pre).
[ 36.000947] systemd[1]: Reached target Local File Systems (Pre).
[ 36.007143] systemd[1]: Starting Local File Systems.
[ 36.050977] systemd[1]: Reached target Local File Systems.
[ 36.056839] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 36.151529] systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
[ 36.260992] systemd[1]: Found device /dev/ttyS0.
[ 36.330990] systemd[1]: Started Recreate Volatile Files and Directories.
[ 36.337988] systemd[1]: Starting System Initialization.
[ 36.370974] systemd[1]: Reached target System Initialization.
[ 36.376912] systemd[1]: Starting D-Bus System Message Bus Socket.
[ 36.410931] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 36.417557] systemd[1]: Starting Sockets.
[ 36.451029] systemd[1]: Reached target Sockets.
[ 36.455747] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[ 36.473569] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 36.487581] systemd[1]: Starting Timers.
[ 36.510922] systemd[1]: Reached target Timers.
[ 36.518320] systemd[1]: Starting Basic System.
[ 36.550942] systemd[1]: Reached target Basic System.
[ 36.558960] systemd[1]: Starting System Logger Daemon...
[ 36.641008] systemd[1]: Started System Logger Daemon.
[ 36.649483] systemd[1]: Starting Netcfg multi-profile daemon...
[ 36.721611] systemd[1]: Starting Periodic Command Scheduler...
[ 36.810953] systemd[1]: Started Periodic Command Scheduler.
[ 36.817602] systemd[1]: Started SSH Key Generation.
[ 36.823713] systemd[1]: Starting OpenSSH Daemon...
[ 36.910952] systemd[1]: Started OpenSSH Daemon.
[ 36.917634] systemd[1]: Starting Login Service...
[ 36.971486] systemd[1]: Starting D-Bus System Message Bus...
[ 37.041072] systemd[1]: Started D-Bus System Message Bus.
[ 37.280933] systemd[1]: Started Login Service.
[ 37.580863] systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
[ 37.588752] systemd[1]: Starting Permit User Sessions...
[root@alarm ~]#


[root@alarm ~]# fdisk -l

Disk /dev/sda: 1059 MB, 1059061760 bytes, 2068480 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x82e68e8a

Device Boot Start End Blocks Id System
/dev/sda1 63 2056319 1028128+ 83 Linux
[root@alarm ~]#

[moonman]

Whatever script you tried to run, it changed your arcNumber.

$this->bbcode_second_pass_quote('', '[') 0.000000] Machine: Seagate FreeAgent DockStar

[Oogbored]

[root@alarm ~]# grep -a --null-data U-Boot /dev/mtd0ro
U-Boot 2011.12 (Apr 18 2012 - 23:08:20)
Seagate GoFlexNetU-Boot
** Invalid partition type "%.32s" (expect "U-Boot")
U-Boot BUG at %s:%d!

[root@alarm ~]# fw_printenv
ethact=egiga0
bootdelay=3
baudrate=115200
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
partition=nand0,2
stdin=serial
stdout=serial
stderr=serial
rescue_installed=0
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi
usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done
usb_scan_list=1 2 3 4
usb_scan_1=usb=0:1 dev=sda1
usb_scan_2=usb=1:1 dev=sdb1
usb_scan_3=usb=2:1 dev=sdc1
usb_scan_4=usb=3:1 dev=sdd1
usb_init=run usb_scan
usb_device=0:1
usb_root=/dev/sda1
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_rootfstype=ext3
sata_device=0:1
sata_root=/dev/sda1
sata_rootfstype=ext3
sata_rootdelay=10
sata_set_bootargs=setenv bootargs console=$console root=$sata_root rootdelay=$sata_rootdelay rootfstype=$sata_rootfstype $mtdparts $sata_custom_params
sata_boot=ide reset; mw 0x800000 0 1; ext2load ide $sata_device 0x800000 /boot/uImage; if ext2load ide $sata_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
sata_bootcmd=run sata_set_bootargs; run sata_boot
bootcmd=run sata_bootcmd; usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
ipaddr=10.0.10.6
ncip=10.10.10.5
ncipk=10.10.10.4
serverip=10.10.10.3
preboot=run nc_test nc_start
nc_test=ping $ncip
nc_start=setenv stdin nc; setenv stdout nc; setenv stderr nc; version
usb_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
sata_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
arcNumber=2998
[root@alarm ~]#

Information from current install, I'll update once I get the next step taken care of.

[Oogbored]

After running uboot update

[root@alarm ~]# fw_printenv
ethact=egiga0
bootdelay=3
baudrate=115200
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
partition=nand0,2
stdin=serial
stdout=serial
stderr=serial
rescue_installed=0
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi
usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done
usb_scan_list=1 2 3 4
usb_scan_1=usb=0:1 dev=sda1
usb_scan_2=usb=1:1 dev=sdb1
usb_scan_3=usb=2:1 dev=sdc1
usb_scan_4=usb=3:1 dev=sdd1
usb_init=run usb_scan
usb_device=0:1
usb_root=/dev/sda1
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
usb_rootfstype=ext3
sata_device=0:1
sata_root=/dev/sda1
sata_rootfstype=ext3
sata_rootdelay=10
sata_set_bootargs=setenv bootargs console=$console root=$sata_root rootdelay=$sata_rootdelay rootfstype=$sata_rootfstype $mtdparts $sata_custom_params
sata_boot=ide reset; mw 0x800000 0 1; ext2load ide $sata_device 0x800000 /boot/uImage; if ext2load ide $sata_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
sata_bootcmd=run sata_set_bootargs; run sata_boot
bootcmd=run sata_bootcmd; usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
ipaddr=10.0.10.6
ncip=10.10.10.5
ncipk=10.10.10.4
serverip=10.10.10.3
preboot=run nc_test nc_start
nc_test=ping $ncip
nc_start=setenv stdin nc; setenv stdout nc; setenv stderr nc; version
usb_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
sata_custom_params=ignore_loglevel netconsole=6665@10.10.10.3/eth0,6666@10.10.10.4/
arcNumber=2998
[root@alarm ~]#

[moonman]

Run these:
$this->bbcode_second_pass_code('', 'fw_setenv ethaddr '00:AA:BB:CC:DD:EE'
fw_setenv arcNumber 3338')

00:AA:BB:CC:DD:EE is your mac address from the bottom of the device.
arcNumber 3338 corresponds to goflex home

[Oogbored]

Ran both and they've affected the appropriate changes in fw_printenv, dmesg however still shows it as a different device and isnow accompanied by
[ 37.588752] systemd[1]: Starting Permit User Sessions...
[16618.552842] uncorrectable error :
.....
[16719.098644] uncorrectable error :

There are a lot in between those two, I'll spare you them.

[Oogbored]

I tracked down what I was doing that triggered everything:

I was following this: http://forum.doozan.com/read.php?2,4638,4645,quote=1
That I found located on this: http://blog.philippklaus.de/2011/04/ins ... flex-home/

Go me.

[moonman]

You've probably booted off of the sata drive. Those maybe the errors due to what you've changed. check fdisk -l.

[Oogbored]

Rebooted and we have definite improvement. It registers itself on the network as ALARM and has its old assigned IP, furthermore it detects the sata drive:



[root@alarm ~]# fdisk -l

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 3000.6 GB, 3000592982016 bytes, 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sda1 * 40 39845927 19922944 83 Linux
/dev/sda2 39845928 41943079 1048576 82 Linux swap / Solaris
/dev/sda4 1 39 19+ ee GPT
Partition 4 does not start on physical sector boundary.

Partition table entries are not in disk order

Disk /dev/sdb: 1059 MB, 1059061760 bytes, 2068480 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x82e68e8a

Device Boot Start End Blocks Id System
/dev/sdb1 63 2056319 1028128+ 83 Linux

[moonman]

And you've likely booted from the sata because U-Boot is setup to try to boot from sata first. run " mount | grep sda" and "mount | grep sdb"