Can not boot from a SSD disk in the esata slot.

[phatkiller]

through a router. tried cross over cable wouldnt work but cross cable was home made havent tested to make sure its 100% yet.

this is what i get when i try to boot from usb
$this->bbcode_second_pass_code('', 'U-Boot 2010.09 (Feb 16 2011 - 18:44:23)
UBIT v0.6 by Jeff Doozan and Peter Carmichael
Hit any key to stop autoboot: 0
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Unknown command '0:1' - try 'help'
** No boot file defined **
** No boot file defined **
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
Unknown command '1:1' - try 'help'
** No boot file defined **
** No boot file defined **
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
Unknown command '2:1' - try 'help'
** No boot file defined **
** No boot file defined **
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
Unknown command '3:1' - try 'help'
** No boot file defined **
** No boot file defined **
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:fast", error -19
Error reading superblock on volume 'ubi:fast'!
UBIFS not mounted, use ubifs mount to mount volume first!

Reset IDE: Bus 0: not available Bus 1: not available
Unknown command '0:1' - try 'help'
** No boot file defined **
** No boot file defined **
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
Unknown command '1:1' - try 'help'
** No boot file defined **
** No boot file defined **
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
usage: fatload <interface> <dev[:part]> <addr> <filename> [bytes]
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:ramdisk", error -19
Error reading superblock on volume 'ubi:ramdisk'!
UBIFS not mounted, use ubifs mount to mount volume first!
')

[moonman]

Try a straight through cable (cat 5e - not cat5). Your computer or the plug or both may have auto-mdix

[phatkiller]

Hey Moon. I got it working again found a thread that talked about upgrading uboot via TFTP boot.

http://forum.doozan.com/read.php?3,6965

Also found this german website too. Has a ton of info. I just used Google Translate to beable to read it.
http://www.mikrocontroller.net/articles/GoFlexHome

Boots up fine lets me login via ssh. Thanks for all you replies/help it is really appreciated.