So, I'm trying to take a pogoplug-Pro and make it a mobile media server for my camper. So far it boots ups, hosts a wireless access point and serves video via minidlna. Now I want to get rid of the 120v requirement. I've removed the original PS, and I have it running off of a "wall wart", that puts 12V on the board and it works fine. The question is.... will it tolerate auto battery voltage fluctuations ( 11.5 to 14V) or does it need to have a regulator in the line to manage that? and if so, any recommendations?
Tom
Power for Pogoplug
2 posts
• Page 1 of 1
Power for Pogoplug
by Socaltom » Tue Apr 26, 2016 12:20 am
used to be owned by me
Pink Pogo V2, Black Pogo V3, Zyxel NAS 325 v1,
used to be Adminstrator for
Goflex net, Black V3, Black V2
Now I have a couple of raspberry pi ( 3+ and 4)
Pink Pogo V2, Black Pogo V3, Zyxel NAS 325 v1,
used to be Adminstrator for
Goflex net, Black V3, Black V2
Now I have a couple of raspberry pi ( 3+ and 4)
- Socaltom
- Posts: 571
- Joined: Thu Apr 07, 2011 2:21 pm
- Location: The left side
Re: Power for Pogoplug
by WarheadsSE » Tue Apr 26, 2016 2:30 am
FOr sanity's sake, I would maintain a regulator.
- WarheadsSE
- Developer
- Posts: 6807
- Joined: Mon Oct 18, 2010 2:12 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests