I have an older Kingston SSD ( SNV425-64GB) that I have been using as the boot/rootfs drive for my NSA325. Its been working fine except that Smartctl reported over 3000 errors, so I bought a replacement and put it into service, then moved the drive to a USB adapter and looked at it with crystaldisk info, and it reports no errors? What the hell? I'm wondering if there is some SSD command that perhaps isn't compatible with this drive? any idea?
Here are the errors reported in smartctl ( through webmin)
$this->bbcode_second_pass_code('', '
Error 3604 occurred at disk power-on lifetime: 15592 hours (649 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ef 00 00 e0 Error: UNC at LBA = 0x000000ef = 239
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 ef 00 00 e0 00 00:00:58.800 READ DMA
c8 00 00 08 d2 00 e2 00 00:00:58.800 READ DMA
c8 00 08 00 d2 00 e2 00 00:00:58.800 READ DMA
c8 00 08 20 e8 04 e2 00 00:00:58.800 READ DMA
c8 00 00 68 94 09 e0 00 00:00:58.800 READ DMA
Error 3603 occurred at disk power-on lifetime: 15592 hours (649 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ef 00 00 e0 Error: UNC at LBA = 0x000000ef = 239
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 ef 00 00 e0 00 00:00:57.900 READ DMA
c8 00 03 ec 00 00 e0 00 00:00:57.900 READ DMA
c8 00 02 ea 00 00 e0 00 00:00:57.900 READ DMA
c8 00 01 e9 00 00 e0 00 00:00:57.900 READ DMA
c8 00 01 e8 00 00 e0 00 00:00:57.900 READ DMA
Error 3602 occurred at disk power-on lifetime: 15592 hours (649 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 80 00 00 e0 Error: UNC at LBA = 0x00000080 = 128
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 e0 80 00 00 e0 08 00:00:56.700 READ DMA
c8 00 08 78 00 00 e0 08 00:00:56.700 READ DMA
c8 00 08 60 f6 73 e7 08 00:00:56.700 READ DMA
c8 00 08 b8 fe 73 e7 08 00:00:56.700 READ DMA
c8 00 08 90 fe 73 e7 08 00:00:56.700 READ DMA
Error 3601 occurred at disk power-on lifetime: 15592 hours (649 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ef 00 00 e0 Error: UNC at LBA = 0x000000ef = 239
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 ef 00 00 e0 00 00:00:21.500 READ DMA
ec 00 00 00 00 00 a0 0a 00:00:21.400 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 0a 00:00:21.400 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 0a 00:00:21.400 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:00:21.200 NOP [Abort queued commands]
Error 3600 occurred at disk power-on lifetime: 15592 hours (649 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ef 00 00 e0 Error: UNC at LBA = 0x000000ef = 239
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 ef 00 00 e0 08 00:00:20.600 READ DMA
c8 00 b0 10 01 81 e0 08 00:00:20.600 READ DMA
c8 00 08 08 01 81 e0 08 00:00:20.600 READ DMA
c8 00 08 00 01 81 e0 08 00:00:20.600 READ DMA
c8 00 08 68 ef 81 e0 08 00:00:20.600 READ DMA
') When I plug the drive in with a USB adapter the errors are reported again, but 2 different windows SMART tools don't report any errors.
Tom