U-Boot v2016.09 and Pogoplug LED Light

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: U-Boot v2016.09 and Pogoplug LED Light

Postby woody » Sat Oct 19, 2019 1:41 pm

@moonman
Before, I saw your post, I tried out the 'netdev' trigger. As you said it doesn't display disk activity, but it doesn't seem to display network activity, either. With 'netdev' set, I can ping google.com and the lights don't blink. I'll go back to my script unless I find a better way to do it.
woody
 
Posts: 61
Joined: Tue Dec 11, 2012 2:40 pm

Re: U-Boot v2016.09 and Pogoplug LED Light

Postby moonman » Sat Oct 19, 2019 6:11 pm

netdev won't work without extra setup. If you just enabled it, it wouldn't show anything.

You need to enable rx and tx so it knows to blink on transmit and receive. You also need to specify which network interface to monitor. Disk-activity will show activity on all ide or sata disks which you have none.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3314
Joined: Sat Jan 15, 2011 3:36 am

Previous

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 4 guests