Got my POGO-E02 restored to factory by following these steps:
1- unplug USB
2- let pogo boot
3-
http://www.mydigitallife.info/how-to-re ... g-service/$this->bbcode_second_pass_quote('', 'I')f you’re original stock Pogoplug firmware installation is intact on mtd1 and mtd2, and the new uBoot has ability to revert to boot the stock firmware, here’s the way to re-enable and turn on the Pogoplug service in stock firmware.
Boot into the default original Pogoplug or DockStar and GoFlex Net environment.
SSH into the Pogoplug device at port 22 (you have to figure out its IP address on your own).
Once established connection, login as root. The default user name and password is as follow, but your device may have different password if changed.
user name: root
password (PogoPlug): ceadmin
password (DockStar): stxadmin
Run the following command to mount the filesystem with read-write access and change directory:
mount -o remount,rw /
cd /etc/init.d
Edit the rcS file with any text editor, such as vi.
Uncomment the following line (remove the # sign):
/etc/init.d/hbmgr.sh start
Save the file.
Reboot the device the reboot command.