Hi guys,
Just bought the seagate goflex home cradle recently and i changing from 500GB to 3TB
i download and flash uboot here: https://archlinuxarm.org/packages/arm/uboot-goflexhome
i notice that the uboot show here is kind of outdate: http://tw.mirror.archlinuxarm.org/os/ar ... oflexhome/
i did like the instruction in this https://archlinuxarm.org/forum/viewtopic.php?f=53&t=2611&start=30 but it still failed to boot. Here is netconsole log
$this->bbcode_second_pass_code('', '
khanhj@khanhj-NUC:~$ nc -lu 10.10.10.5 6666
U-Boot 2016.09.01-1 (Oct 10 2016 - 23:11:39 -0600) Arch Linux ARM
Seagate GoFlex Home
gcc (GCC) 6.2.1 20160830
GNU ld (GNU Binutils) 2.27
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Reset IDE: Bus 0: OK Bus 1: not available
Device 0: Model: WDC WD30EZRZ-00Z5HB0 Firm: 00.02C.3 Ser#: WD-WMC4N0M7ER6Y
Type: Hard Disk
Supports 48-bit addressing
Capacity: 2861588.4 MB = 2794.5 GB (5860533176 x 512)
USB device 0: unknown device
Device 0: Model: WDC WD30EZRZ-00Z5HB0 Firm: 00.02C.3 Ser#: WD-WMC4N0M7ER6Y
Type: Hard Disk
Supports 48-bit addressing
Capacity: 2861588.4 MB = 2794.5 GB (5860533176 x 512)
... is now current device
ide found on device 0
Checking for: /boot/uEnv.txt ...
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Entry Array CRC is wrong: 0x253e8d13 != 0x2565e240
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Entry Array CRC is wrong: 0x253e8d13 != 0x2565e240
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Entry Array CRC is wrong: 0x253e8d13 != 0x2565e240
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
No kernel found
Device 1: not available
Trying to boot from NAND ...
ubi0: attaching mtd1
UBI init error 22
Error reading superblock on volume 'ubi0:rootfs' errno=-19!
ubifsmount - mount UBIFS volume
Usage:
ubifsmount <volume-name>
- mount 'volume-name' volume
GoFlexHome>
')
Any help is appreciated.
Khanhj