I am not sure if this forum is an appropriate place to post this ,but I found v1,2 pro pogo kernel and ram disk image under http://archlinuxarm.org/
so, someone might be able to help this.
Is Kernel image, ram disk image for Series 4 available ?
I bricked my brand new pogo plug Series 4 when I overwrote lib file when trying to make samba setting.
I somehow managed to connect it to pc via FTDI cable
I set up hyper terminal and pumpKin
when I saw boot message on first time after FTDI cable connection ,
an error message was
" /sbin/init: error while loading shared libraries: /lib/libc.so.6: ELF file versi on does not match current one" , this is what I expected tho.
$this->bbcode_second_pass_code('', '
CE>> reset
U-Boot 1.1.4 (Oct 1 2011 - 12:06:06) Cloud Engines 1.1.2 (3.4.27) PHYADDR=0
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006918B4
Soc: 88F6192 A1 (DDR2)CPU running @ 800Mhz L2 running @ 400MhzSysClock = 200Mhz , TClock = 166Mhz
DRAM CAS Latency = 3 tRP = 3 tRAS = 8 tRCD=3DRAM CS[0] base 0x00000000 size 128MBDRAM Total size 128MB 16bit widthAddresses 8M - 0M are saved for the U-Boot usage.Mem malloc Initialization (8M - 7M): DoneNAND:128 MB*** Warning - bad CRC or NAND, using default environment
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)CLOUD ENGINES BOARD (GUESSED): PPV4A3
Streaming disabledWrite allocate disabled
USB 0: host modePEX 0: PCI Express Root Complex InterfacePEX interface detected Link X1Net: egiga0 [PRIME]Hit any key to stop autoboot: 0
Loading from NAND 128MB 3,3V 8-bit, offset 0x200000
** Bad Magic Number 0xffffffff **
Loading from NAND 128MB 3,3V 8-bit, offset 0x500000 Image Name: Linux-2.6.31.8 Created: 2011-09-28 19:09:20 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2080956 Bytes = 2 MB Load Address: 00008000 Entry Point: 00008000## Booting image at 00800000 ... Image Name: Linux-2.6.31.8 Created: 2011-09-28 19:09:20 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2080956 Bytes = 2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OKOK
Starting kernel ...
Uncompressing Linux..................................................................................................................................... done, booting the kernel.[ 0.000000] Linux version 2.6.31.8 (afenn@kt) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #5 Wed Sep 28 12:09:12 PDT 2011[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977[ 0.000000] CPU: VIVT data cache, VIVT instruction cache[ 0.000000] Machine: Feroceon-KW[ 0.000000] Using UBoot passing parameters structure[ 0.000000] Ignoring unrecognised tag 0x41004345[ 0.000000] Memory policy: ECC disabled, Data cache writeback[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32512[ 0.000000] Kernel command line: console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=4,2048 rootfstype=ubifs[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)[ 0.000000] Memory: 128MB = 128MB total[ 0.000000] Memory: 118356KB available (3852K code, 261K data, 124K init, 0Khighmem)[ 0.000000] Hierarchical RCU implementation.[ 0.000000] NR_IRQS:128[ 0.000000] Console: colour dummy device 80x30[ 0.000000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)[ 0.230000] Mount-cache hash table entries: 512[ 0.230000] CPU: Testing write buffer coherency: ok[ 0.230000] NET: Registered protocol family 16[ 0.230000] Feroceon L2: Enabling L2[ 0.230000] Feroceon L2: Cache support initialised.[ 0.230000][ 0.230000] CPU Interface[ 0.230000] -------------[ 0.230000] SDRAM_CS0 ....base 00000000, size 128MB[ 0.230000] SDRAM_CS1 ....disable[ 0.230000] SDRAM_CS2 ....disable[ 0.230000] SDRAM_CS3 ....disable[ 0.230000] PEX0_MEM ....base e0000000, size 128MB[ 0.230000] PEX0_IO ....base f2000000, size 1MB[ 0.230000] PEX1_MEM ....no such[ 0.230000] PEX1_IO ....no such[ 0.230000] INTER_REGS ....base f1000000, size 1MB[ 0.230000] NFLASH_CS ....base fa000000, size 2MB[ 0.230000] SPI_CS ....base f4000000, size 16MB[ 0.230000] BOOT_ROM_CS ....no such[ 0.230000] DEV_BOOTCS ....no such[ 0.230000] CRYPT_ENG ....base f0000000, size 2MB[ 0.230000][ 0.230000] Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)--RD-88F6192A-NAS Soc: 88F6192 A1 LE[ 0.230000][ 0.230000] Detected Tclk 166666667 and SysClk 200000000[ 0.230000] Marvell USB EHCI Host controller #0: c403e740[ 0.730000] PEX0 interface detected Link X1[ 0.740000] pci 0000:00:01.0: PME# supported from D0 D1 D3hot[ 0.740000] pci 0000:00:01.0: PME# disabled[ 0.740000] PCI: bus0: Fast back to back transfers disabled[ 0.740000] mvPexLocalBusNumSet: ERR. Invalid PEX interface 1[ 0.750000] bio: create slab <bio-0> at 0[ 0.750000] SCSI subsystem initialized[ 0.750000] usbcore: registered new interface driver usbfs[ 0.750000] usbcore: registered new interface driver hub[ 0.750000] usbcore: registered new device driver usb[ 0.750000] NET: Registered protocol family 2[ 0.750000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.750000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)[ 0.750000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)[ 0.750000] TCP: Hash tables configured (established 4096 bind 4096)[ 0.750000] TCP reno registered[ 0.750000] NET: Registered protocol family 1[ 0.750000] cpufreq: Init kirkwood cpufreq driver[ 0.760000] XOR registered 4 channels[ 0.760000] XOR 2nd invalidate WA enabled[ 0.760000] cesadev_init(c000d7fc)[ 0.760000] mvCesaInit: sessions=640, queue=64, pSram=f0000000[ 0.760000] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.770000] msgmni has been set to 231[ 0.770000] alg: No test for cipher_null (cipher_null-generic)[ 0.770000] alg: No test for ecb(cipher_null) (ecb-cipher_null)[ 0.770000] alg: No test for digest_null (digest_null-generic)[ 0.770000] alg: No test for compress_null (compress_null-generic)[ 0.780000] alg: No test for stdrng (krng)[ 0.780000] alg: No test for hmac(digest_null) (hmac(digest_null-generic))[ 0.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[ 0.790000] io scheduler noop registered[ 0.790000] io scheduler anticipatory registered (default)[ 0.790000] Initializing ths8200_init[ 0.790000] Initializing dove_adi9889_init[ 0.810000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled[ 0.810000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A[ 0.810000] console [ttyS0] enabled[ 0.820000] Integrated Sata device found[ 0.830000] IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs[ 0.850000] scsi0 : Marvell SCSI to SATA adapter[ 0.860000] scsi1 : Marvell SCSI to SATA adapter[ 0.870000] Loading Marvell Ethernet Driver:[ 0.870000] o Cached descriptors in DRAM[ 0.880000] o DRAM SW cache-coherency[ 0.880000] o 1 Giga ports supported[ 0.880000] o Single RX Queue support - ETH_DEF_RXQ=0[ 0.890000] o Single TX Queue support - ETH_DEF_TXQ=0[ 0.890000] o TCP segmentation offload (TSO) supported[ 0.900000] o Large Receive offload (LRO) supported[ 0.900000] o Receive checksum offload supported[ 0.910000] o Transmit checksum offload supported[ 0.910000] o Network Fast Processing (Routing) supported - (Disabled)[ 0.920000] o Driver ERROR statistics enabled[ 0.930000] o Proc tool API enabled[ 0.930000] o SKB Reuse supported - (Disabled)[ 0.930000] o SKB Recycle supported - (Disabled)[ 0.940000] o Rx descripors: q0=128[ 0.940000] o Tx descripors: q0=532[ 0.950000] o Loading network interface(s):[ 0.950000] o register under mv88fx_eth platform[ 0.960000] o eth0, ifindex = 2, GbE port = 0[ 0.960000][ 0.960000] mvFpRuleDb (c45b1000): 1024 entries, 4096 bytes[ 0.970000] Counter=0, opIdx=6, overhead=16[ 0.970000] Counter=1, opIdx=2, overhead=0[ 0.980000] Counter=2, opIdx=1, overhead=18[ 0.980000] Counter=3, opIdx=2, overhead=0[ 0.990000] tun: Universal TUN/TAP device driver, 1.6[ 0.990000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[ 1.000000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)[ 1.010000] Scanning device for bad blocks[ 1.010000] Bad eraseblock 97 at 0x000000c20000[ 1.060000] Using static partition definition[ 1.060000] Creating 5 MTD partitions on "nand_mtd":[ 1.070000] 0x000000000000-0x000000200000 : "u-boot"[ 1.080000] 0x000000200000-0x000000500000 : "uImage"[ 1.080000] 0x000000500000-0x000000800000 : "uImage2"[ 1.090000] 0x000000800000-0x000001000000 : "failsafe"[ 1.090000] 0x000001000000-0x000008000000 : "root"[ 1.100000] UBI: attaching mtd4 to ubi0[ 1.100000] UBI: physical eraseblock size: 131072 bytes (128 KiB)[ 1.110000] UBI: logical eraseblock size: 126976 bytes[ 1.120000] UBI: smallest flash I/O unit: 2048[ 1.120000] UBI: sub-page size: 512[ 1.120000] UBI: VID header offset: 2048 (aligned 2048)[ 1.130000] UBI: data offset: 4096[ 1.360000] UBI: attached mtd4 to ubi0[ 1.360000] UBI: MTD device name: "root"[ 1.360000] UBI: MTD device size: 112 MiB[ 1.370000] UBI: number of good PEBs: 896[ 1.370000] UBI: number of bad PEBs: 0[ 1.380000] UBI: max. allowed volumes: 128[ 1.380000] UBI: wear-leveling threshold: 4096[ 1.390000] UBI: number of internal volumes: 1[ 1.390000] UBI: number of user volumes: 1[ 1.400000] UBI: available PEBs: 0[ 1.400000] UBI: total number of reserved PEBs: 896[ 1.410000] UBI: number of PEBs reserved for bad PEB handling: 8[ 1.410000] UBI: max/mean erase counter: 1/0[ 1.420000] UBI: image sequence number: 0[ 1.420000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.430000] ehci_marvell ehci_marvell.70059: Marvell Orion EHCI[ 1.430000] ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1[ 1.440000] UBI: background thread "ubi_bgt0d" started, PID 452[ 1.470000] ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100[ 1.490000] ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00[ 1.490000] usb usb1: configuration #1 chosen from 1 choice[ 1.500000] hub 1-0:1.0: USB hub found[ 1.500000] hub 1-0:1.0: 1 port detected[ 1.510000] xhci_hcd 0000:00:01.0: xHCI Host Controller[ 1.510000] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2[ 1.520000] xhci_hcd 0000:00:01.0: irq 9, io mem 0xe0000000[ 1.530000] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has noSuperSpeed companion descriptor[ 1.540000] usb usb2: configuration #1 chosen from 1 choice[ 1.540000] hub 2-0:1.0: USB hub found[ 1.550000] hub 2-0:1.0: 4 ports detected[ 1.550000] Initializing USB Mass Storage driver...[ 1.550000] usbcore: registered new interface driver usb-storage[ 1.560000] USB Mass Storage support registered.[ 1.570000] usbcore: registered new interface driver ums-datafab[ 1.570000] usbcore: registered new interface driver ums-freecom[ 1.580000] usbcore: registered new interface driver ums-jumpshot[ 1.580000] usbcore: registered new interface driver ums-sddr09[ 1.590000] usbcore: registered new interface driver ums-sddr55[ 1.600000] usbcore: registered new interface driver ums-usbat[ 1.600000] mice: PS/2 mouse device common for all mice[ 1.610000] i2c /dev entries driver[ 1.620000] sdhci: Secure Digital Host Controller Interface driver[ 1.620000] sdhci: Copyright(c) Pierre Ossman[ 1.630000] mmc0: mvsdio driver initialized, using GPIO 27 for card detection
[ 1.640000] usbcore: registered new interface driver usbhid[ 1.640000] usbhid: v2.6:USB HID core driver[ 1.650000] TCP cubic registered[ 1.650000] NET: Registered protocol family 17[ 1.660000] RPC: Registered udp transport module.[ 1.660000] RPC: Registered tcp transport module.[ 1.670000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)[ 1.740000] UBIFS: recovery needed[ 1.790000] UBIFS: recovery completed[ 1.790000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"[ 1.800000] UBIFS: file system size: 110850048 bytes (108252 KiB, 105 MiB,873 LEBs)[ 1.810000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)[ 1.820000] UBIFS: media format: w4/r0 (latest is w4/r0)[ 1.820000] UBIFS: default compressor: lzo[ 1.830000] UBIFS: reserved for root: 0 bytes (0 KiB)[ 1.830000] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 1.840000] Freeing init memory: 124K/sbin/init: error while loading shared libraries: /lib/libc.so.6: ELF file version does not match current one
[ 1.900000] Kernel panic - not syncing: Attempted to kill init![ 1.900000] Backtrace:[ 1.900000] [<c00fe1bc>] (dump_backtrace+0x0/0x114) from [<c0035594>] (dump_stack+0x18/0x1c)[ 1.910000] r7:000000f8 r6:c4019c40 r5:c4019c40 r4:c0415830[ 1.920000] [<c003557c>] (dump_stack+0x0/0x1c) from [<c00355e4>] (panic+0x4c/0x114)[ 1.930000] [<c0035598>] (panic+0x0/0x114) from [<c012dce8>] (do_exit+0x7c/0x5b4)[ 1.930000] r3:c03f1d94 r2:c4019c40 r1:c401fe0c r0:c00c250b[ 1.940000] [<c012dc6c>] (do_exit+0x0/0x5b4) from [<c012e2b4>] (do_group_exit+0x94/0xc8)[ 1.950000] [<c012e220>] (do_group_exit+0x0/0xc8) from [<c012e300>] (sys_exit_group+0x18/0x24)[ 1.960000] r5:40025000 r4:000006a8[ 1.960000] [<c012e2e8>] (sys_exit_group+0x0/0x24) from [<c002c780>] (ret_fast_syscall+0x0/0x2c)
')
so, I think I need to burn kernel image
I can see files here
http://pogoplug.com/opensource
but no image file
or is it possible to replace only /lib/libc.so.6 ?
Can I find kernel image file somewhere, or am I supposed to make it myself? but I don't have much knowledge to make it.
any help is appreciated