[How-To] install my.pogoplug.com service on any armv5 device

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby moonman » Fri Oct 19, 2012 11:16 am

Check troubleshooting section, specifically where you need to delete all certificates
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby mamboman » Fri Oct 19, 2012 4:01 pm

Deleting the certs and restarting over 30 times did not seem to help. It is still CRYPYTO: UNSET
I am not sure if there is something wrong with their Godaddy SSL cert?

[000103.385][MTP20 ][SVCND ][01] + SVC RPC (checkin) Failed: -15!
[000103.676][MTP12 ][CHILD ][08] mount: / is busy
[000103.678][MTP12 ][PLCRYP][07] USING MAC ADDRESS: 00:25:31:02:XX:XX from eth0
[000103.775][MTP12 ][PLCRYP][07] TALKING TO SERVICE @ secure.pogoplug.com
[000104.263][MTP12 ][BRHTTP][08] Error with certificate at depth: 1
[000104.263][MTP12 ][BRHTTP][08] subject: /C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certificates.godaddy.com/repository/CN=Go Daddy Secure Certification Authority/serialNumber=07969287
[000104.264][MTP12 ][BRHTTP][08] issuer: /C=US/O=The Go Daddy Group, Inc./OU=Go Daddy Class 2 Certification Authority
[000104.264][MTP12 ][BRHTTP][08] error: 20:unable to get local issuer certificate
[000104.265][MTP12 ][BRHTTP][08] Error with certificate at depth: 1
[000104.266][MTP12 ][BRHTTP][08] subject: /C=US/ST=Arizona/L=Scottsdale/O=GoDaddy.com, Inc./OU=http://certificates.godaddy.com/repository/CN=Go Daddy Secure Certification Authority/serialNumber=07969287
[000104.266][MTP12 ][BRHTTP][08] issuer: /C=US/O=The Go Daddy Group, Inc./OU=Go Daddy Class 2 Certification Authority
[000104.267][MTP12 ][BRHTTP][08] error: 27:certificate not trusted
mamboman
 
Posts: 1
Joined: Fri Oct 19, 2012 3:23 pm

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby moonman » Wed Nov 14, 2012 10:09 am

Bumping to let people know the guide is updated for systemd.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby wxtofly » Thu Jan 10, 2013 11:49 pm

FYI, It is simple to run the cloud engines original software on the V3 because there are no module conflicts. The kernel seems to be compatible.

I have only started it manually, as I don't want it on all the time, but to set it up,
all I did was mount the mtd2 so I could copy its usr/local/cloudengines*
over to my /dev/sda1
I put /usr/local/cloudengines/bin in my path.
Since the plug has hbmgr.sh -> /usr/local/cloudengines/bin/hbplug_init
I just run hbplug_init start when I want it to start and hbplug_init stop to turn it off.

Shows up almost immediately on mypogo.com.

TJ
wxtofly
 
Posts: 17
Joined: Mon Dec 24, 2012 3:27 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby apowell656 » Mon Jan 28, 2013 11:57 pm

I completed all of the steps, but the hbplug.conf file keeps getting removed. Any suggestions? Thanks in advance.

- Andre
apowell656
 
Posts: 41
Joined: Fri Jan 25, 2013 1:24 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby moonman » Tue Jan 29, 2013 12:23 am

Do you have a copy of hbplug.conf under /usr/local ?
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby apowell656 » Tue Jan 29, 2013 2:40 am

There is a copy under /usr/local.
apowell656
 
Posts: 41
Joined: Fri Jan 25, 2013 1:24 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby moonman » Tue Jan 29, 2013 6:52 am

every time you start it, hbplug.conf should be copied from /usr/local to /usr/local/cloudengines/bin/ check that the file is actually copied
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby apowell656 » Tue Jan 29, 2013 12:57 pm

Here is a copy of the file. I am inclined to believe there is something wrong with the conf file

$this->bbcode_second_pass_code('', 'vfsdir0=plugdata,/media/LIFESTUDIO
installdir=/usr/local/cloudengines
#datadir=.
#example below: vfsdir<number>=<name>,<path>
datadir=.
nohotplug=1
svcid=C9YZAE3LDEDUCU8L86LXNFQBJS')

$this->bbcode_second_pass_quote('moonman', 'e')very time you start it, hbplug.conf should be copied from /usr/local to /usr/local/cloudengines/bin/ check that the file is actually copied
apowell656
 
Posts: 41
Joined: Fri Jan 25, 2013 1:24 am

Re: [How-To] install Pogoplug software on ANY armv5 with ALA

Postby moonman » Wed Jan 30, 2013 8:33 am

No, conf looks fine unless LIFESTUDIO is not all capitals. Have you tried running it directly? what was the output?
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

PreviousNext

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 6 guests