[How-To] install my.pogoplug.com service on any armv5 device

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby Socaltom » Mon Aug 13, 2012 2:00 am

Ive tried shutting down apache and starting hbplug, that gave me a new ssid, but still not connecting
Tom
Owned by me
Pink Pogo V2, Black Pogo V3, Zyxel NAS 325 v1,
Adminstrator for
Goflex net, Black V3, Black V2
Socaltom
 
Posts: 569
Joined: Thu Apr 07, 2011 2:21 pm
Location: The left side

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby moonman » Mon Aug 13, 2012 6:59 am

Yes I experienced the overwrite problem once again, so I decided to keep hbplug.conf one level up from cloudengines folder (/usr/local) I hope this will keep it intact.

I looked at the log on mine and found a couple of differences. First mine did bind to port 80. Second, mine says CRYPTO KEY: VALID, yours says UNSET. Try reinstalling everything from scratch? Could it be that something got corrupted?
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3105
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby moonman » Mon Aug 13, 2012 7:10 am

Try this:
remove httpd from daemons in rc.conf, at least for now

Code: Select all
cd /usr/local/cloudengines/etc
rm -r ./*
cd ..
./bin/hbplug   #wait until it exits, it will download new certificates
reboot


When it boots make sure your hbplug.conf is intact

Now don't just run hbplug, but run the script /etc/rc.d/pogoplug start
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3105
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby briansix » Tue Sep 11, 2012 7:48 pm

Just did this on my v3 and it is awesome. Thanks!
briansix
 
Posts: 1
Joined: Tue Sep 11, 2012 7:46 pm

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby Socaltom » Mon Sep 17, 2012 11:24 pm

I just can't get it to work on either of my plugs. I can go to my.pogoplug.com and register. I says is successfully finds the plug, but it says I haven't plugged anything into it. I thought maybe it was because I was using the sata drive on the Pro, but I couldn't get it to work on my V2 either. I give up. ( well at least for another week ;) )
Tom
Owned by me
Pink Pogo V2, Black Pogo V3, Zyxel NAS 325 v1,
Adminstrator for
Goflex net, Black V3, Black V2
Socaltom
 
Posts: 569
Joined: Thu Apr 07, 2011 2:21 pm
Location: The left side

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby WarheadsSE » Tue Sep 18, 2012 2:05 am

@Socaltom
Did you setup the vfsdir#'s correctly? Should come up with those, empty or not. I have had it running on all of my devices without issue.
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 6780
Joined: Mon Oct 18, 2010 2:12 pm

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby johnny5 » Mon Sep 24, 2012 4:23 am

I have tried to follow this guide to revert my firmware back to the pogoplug firmware but pogoplug does not recognize my device. Can I get some assistance? Thank you.
johnny5
 
Posts: 4
Joined: Mon Sep 24, 2012 4:21 am

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby moonman » Mon Sep 24, 2012 6:37 am

This guide is not for reverting the firmware back to what pogoplug came with. It shows how to get pogoplug functionality (specifically using the my.pogoplug.com to access your files) while still running archlinux arm. So which is it that you are looking to do.
Pogoplug V4 | GoFlex Home | Raspberry Pi B 512 | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | |[armv5] How to install my.pogoplug.com service | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3105
Joined: Sat Jan 15, 2011 3:36 am
Location: Calgary, Canada

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby johnny5 » Mon Sep 24, 2012 3:30 pm

moonman sorry it looks like I misunderstood the post. I'll create a new thread for my issue, thank you.
johnny5
 
Posts: 4
Joined: Mon Sep 24, 2012 4:21 am

Re: How to install Pogoplug software on ANY armv5 with ALARM

Postby rogerdygas » Fri Oct 19, 2012 9:07 am

I have done all the steps above but when I start pogoplug it shows on the web interface as no drive attached, when I go to check my hbplug.conf file (/usr/local also /usr/local/cloudengines/bin/) for errors the conf file shows as nothing in it, if i add the info again and save I get [error writing ./usr/local/hbplug.conf: No such file or directory ].

Please could somebody help?
rogerdygas
 
Posts: 33
Joined: Mon Oct 08, 2012 4:29 pm

PreviousNext

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 2 guests