U-Boot v2016.09 released

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: U-Boot v2015.07 released

Postby moonman » Thu Oct 08, 2015 9:12 pm

You can flash from within stock or you have to change some uboot environment variables to get it to flash from ALARM.
Flash layout will be different after flashing this uboot, so you will lose everything you had in the internal nand before flashing.

All this is in the first post and corresponding NSA325 posts in the thread (linked from the first post).
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
[armv5] Updated U-Boot | [armv5] NAND Rescue System
Posts: 3327
Joined: Sat Jan 15, 2011 3:36 am

Re: U-Boot v2015.07 released

Postby dietgert » Sat Oct 10, 2015 6:36 pm

Question for the NSA 310:

/etc/systemd/network/enp1s0.network (dt-kernel)



How can I change this to static IP ?

ip addr add broadcast dev enp1s0
ip route add default via

did it ' till the next reboot.

Best Regards,
Posts: 15
Joined: Mon Sep 14, 2015 6:24 pm

Re: U-Boot v2015.07 released

Postby WarheadsSE » Sat Oct 10, 2015 7:25 pm

man systemd.network
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
Posts: 6807
Joined: Mon Oct 18, 2010 2:12 pm

Re: U-Boot v2015.07 released

Postby bodhi » Wed Oct 14, 2015 7:18 am


I've pushed new versions for NSA3xx to u-boot-kirkwood: https://github.com/mibodhi/u-boot-kirkwood

Posts: 224
Joined: Sat Aug 13, 2011 10:06 am


Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 2 guests