[Solved] Bricked GoFlex Home? No ssh.

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

Re: Bricked GoFlex Home? No ssh.

Postby moonman » Wed Oct 07, 2015 8:59 pm

shouldn't matter where it is mounted as long as you know it is the correct drive.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: Bricked GoFlex Home? No ssh.

Postby klitterbandje » Wed Oct 07, 2015 10:08 pm

I'm sure it is, but it just keeps flashing green.

Any idea?
klitterbandje
 
Posts: 11
Joined: Wed Sep 30, 2015 11:25 pm

Re: Bricked GoFlex Home? No ssh.

Postby moonman » Wed Oct 07, 2015 11:00 pm

Do you have serial connection? Which U-Boot version do you have?
Something wasn't done properly. Or my instructions are getting old. I haven't used LiveCD in years.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: Bricked GoFlex Home? No ssh.

Postby klitterbandje » Wed Oct 07, 2015 11:12 pm

I'm not sure which version, and I don't have a serial connection.

I tried to read uboot from netconsole on linux and mac but no output at all.

Before I reformatted the disk I had a steady green light, but now it won't read the disk.
klitterbandje
 
Posts: 11
Joined: Wed Sep 30, 2015 11:25 pm

Re: Bricked GoFlex Home? No ssh.

Postby klitterbandje » Wed Oct 07, 2015 11:12 pm

I mean, it won't boot the disk.
klitterbandje
 
Posts: 11
Joined: Wed Sep 30, 2015 11:25 pm

Re: Bricked GoFlex Home? No ssh.

Postby klitterbandje » Thu Oct 08, 2015 9:52 am

The mount point is used on Ubuntu was wrong. It was /media/it/rootfs.
ArchLinux is working again.

This can be flagged as solved.

Thank you.
Last edited by moonman on Thu Oct 08, 2015 10:31 am, edited 1 time in total.
Reason: pointing point -> mount point
klitterbandje
 
Posts: 11
Joined: Wed Sep 30, 2015 11:25 pm

Re: Bricked GoFlex Home? No ssh.

Postby moonman » Thu Oct 08, 2015 10:32 am

Edit subject in the first post to mark it as solved.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Previous

Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 20 guests