GoFlexHome not connecting to network after upgrade

This forum is for Marvell Kirkwood devices such as the GoFlex Home/Net, PogoPlug v1/v2, SheevaPlug, and ZyXEL devices.

GoFlexHome not connecting to network after upgrade

Postby jcha93 » Mon Oct 19, 2015 11:57 am

Hi,

Long story short, I had to refresh my install and had to endorse diverse tentative.

Current situation is that I'm using a USB key to boot with no HDD plugged-in.
The fresh USB key with ArchLinuxARM-kirkwood-latest.tar.gz extract is running well and I can access my system with no issue.
But as soon as I upgrade as per below, on next reboot, I have no more access (reproduce 3 times already with USB and HDD boot):
$this->bbcode_second_pass_code('', '
[root@alarm ~]# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
alarm is up to date
aur is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (18) curl-7.45.0-1 filesystem-2015.09-1 glib2-2.46.0-2 gnupg-2.1.9-1 gpgme-1.6.0-2 groff-1.22.3-4 libsystemd-227-1 libutil-linux-2.27-6 linux-kirkwood-4.2.3-1 man-db-2.7.4-1
openresolv-3.7.1-1 pacman-4.2.1-4 pacman-mirrorlist-20151007-1 systemd-227-1 systemd-sysvcompat-227-1 tzdata-2015g-1 util-linux-2.27-6 xz-5.2.2-1

Total Download Size: 32.57 MiB
Total Installed Size: 99.61 MiB
Net Upgrade Size: -53.70 MiB

:: Proceed with installation? [Y/n] Y
:: Retrieving packages ...
filesystem-2015.09-1-arm 8.8 KiB 0.00B/s 00:00 [###########################################################################] 100%
tzdata-2015g-1-any 220.9 KiB 2.16M/s 00:00 [###########################################################################] 100%
libutil-linux-2.27-6-arm 256.4 KiB 5.01M/s 00:00 [###########################################################################] 100%
curl-7.45.0-1-arm 753.7 KiB 8.18M/s 00:00 [###########################################################################] 100%
glib2-2.46.0-2-arm 1958.1 KiB 8.69M/s 00:00 [###########################################################################] 100%
gnupg-2.1.9-1-arm 1666.8 KiB 8.14M/s 00:00 [###########################################################################] 100%
gpgme-1.6.0-2-arm 204.5 KiB 9.98M/s 00:00 [###########################################################################] 100%
groff-1.22.3-4-arm 1713.4 KiB 8.81M/s 00:00 [###########################################################################] 100%
xz-5.2.2-1-arm 215.8 KiB 10.5M/s 00:00 [###########################################################################] 100%
libsystemd-227-1-arm 280.0 KiB 9.12M/s 00:00 [###########################################################################] 100%
util-linux-2.27-6-arm 1609.0 KiB 8.27M/s 00:00 [###########################################################################] 100%
systemd-227-1-arm 4.1 MiB 8.48M/s 00:00 [###########################################################################] 100%
linux-kirkwood-4.2.3-1-arm 18.8 MiB 1867K/s 00:10 [###########################################################################] 100%
man-db-2.7.4-1-arm 353.3 KiB 8.63M/s 00:00 [###########################################################################] 100%
openresolv-3.7.1-1-any 18.3 KiB 0.00B/s 00:00 [###########################################################################] 100%
pacman-mirrorlist-20151007-1-any 1416.0 B 0.00B/s 00:00 [###########################################################################] 100%
pacman-4.2.1-4-arm 645.7 KiB 9.01M/s 00:00 [###########################################################################] 100%
systemd-sysvcompat-227-1-arm 5.7 KiB 0.00B/s 00:00 [###########################################################################] 100%
(18/18) checking keys in keyring [###########################################################################] 100%
(18/18) checking package integrity [###########################################################################] 100%
(18/18) loading package files [###########################################################################] 100%
(18/18) checking for file conflicts [###########################################################################] 100%
(18/18) checking available disk space [###########################################################################] 100%
( 1/18) upgrading filesystem [###########################################################################] 100%
( 2/18) upgrading tzdata [###########################################################################] 100%
( 3/18) upgrading libutil-linux [###########################################################################] 100%
( 4/18) upgrading curl [###########################################################################] 100%
( 5/18) upgrading glib2 [###########################################################################] 100%
( 6/18) upgrading gnupg [###########################################################################] 100%
( 7/18) upgrading gpgme [###########################################################################] 100%
( 8/18) upgrading groff [###########################################################################] 100%
( 9/18) upgrading xz [###########################################################################] 100%
(10/18) upgrading libsystemd [###########################################################################] 100%
(11/18) upgrading util-linux [###########################################################################] 100%
(12/18) upgrading systemd [###########################################################################] 100%
(13/18) upgrading linux-kirkwood [###########################################################################] 100%
>>> Updating module dependencies. Please wait ...
(14/18) upgrading man-db [###########################################################################] 100%
(15/18) upgrading openresolv [###########################################################################] 100%
(16/18) upgrading pacman-mirrorlist [###########################################################################] 100%
(17/18) upgrading pacman [###########################################################################] 100%
(18/18) upgrading systemd-sysvcompat [###########################################################################] 100%
[root@alarm ~]# dmesg | tail
[ 1340.232966] systemd[1]: Cannot add dependency systemd-sysctl.service to sysinit.target, ignoring: File exists
[ 1340.252895] systemd[1]: Cannot add dependency systemd-modules-load.service to sysinit.target, ignoring: File exists
[ 1340.272892] systemd[1]: Cannot add dependency systemd-update-done.service to sysinit.target, ignoring: File exists
[ 1340.292888] systemd[1]: Cannot add dependency systemd-sysusers.service to sysinit.target, ignoring: File exists
[root@alarm ~]# sync
[root@alarm ~]# reboot
')
My router (internet provider box) is not even showing any IP assignment.

Any suggestion on what I'm doing wrong ?

Thanks,
Jérôme
jcha93
 
Posts: 17
Joined: Thu Nov 29, 2012 1:19 pm

Re: GoFlexHome not connecting to network after upgrade

Postby WarheadsSE » Mon Oct 19, 2015 2:21 pm

No more access via what method? What is the error message?
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 6807
Joined: Mon Oct 18, 2010 2:12 pm

Re: GoFlexHome not connecting to network after upgrade

Postby jcha93 » Mon Oct 19, 2015 2:41 pm

Hi,

I can't SSH anymore as the GoFlexHome is not even getting an IP.
At least I can't SSH to expected IP (not connecting).
Plus my router (internet provider box) is showing no IP assigned.

Regards,
Jérôme
jcha93
 
Posts: 17
Joined: Thu Nov 29, 2012 1:19 pm

Re: GoFlexHome not connecting to network after upgrade

Postby cancel » Tue Oct 20, 2015 3:44 am

Same problem with my Pogoplug after upgrading systemd to 227. If I use a serial cable, I don't see eth0 when I run ifconfig. As soon as I downgrade systemd-* to 226, the problem is gone.
cancel
 
Posts: 3
Joined: Thu Sep 13, 2012 3:04 am

Re: GoFlexHome not connecting to network after upgrade

Postby Kabbone » Tue Oct 20, 2015 10:10 am

Here is also a topic with probably the same problem. You can downgrade systemd until there is a solution.
http://archlinuxarm.org/forum/viewtopic.php?f=57&t=9394&p=49026#p49026
Kabbone
 
Posts: 153
Joined: Thu Jul 25, 2013 9:20 am

Re: GoFlexHome not connecting to network after upgrade

Postby jcha93 » Tue Oct 20, 2015 4:02 pm

Thanks,

I will follow this other thread.

Regards,
Jérôme
jcha93
 
Posts: 17
Joined: Thu Nov 29, 2012 1:19 pm

Re: GoFlexHome not connecting to network after upgrade

Postby Sergeanter » Wed Oct 21, 2015 2:51 am

Got the same problem on 2 out of 3 PogoPlug Mobile that I have. Downgrade of systemd to 226-3.1 solved the network issue.
Unfortunately I cannot figure what is special about the 3rd one. It also has the same " booting" pam_nologin(8) message in console but gets IP nevertheless.
Sergeanter
 
Posts: 82
Joined: Wed Oct 02, 2013 5:14 am


Return to Marvell Kirkwood

Who is online

Users browsing this forum: No registered users and 10 guests