3.10.0-1 kernel (latest) won't boot - TonidoPlug2

This forum is for Marvell Armada 310 based devices including the TonidoPlug 2 and the TopKick.

3.10.0-1 kernel (latest) won't boot - TonidoPlug2

Postby devr » Sat Jul 20, 2013 11:24 pm

Hey all,

Did a "pacman -Syu", got the latest kernel (was running 3.9 just fine). Now my TonidoPlug2 has issues booting due to the arcNumber. Has that changed with this kernel. I am currently set to 4101, but when booting I get the bollowing message:

Error: unrecognized/unsupported machine ID (r1 = 0x00001005).


Please advise
devr
 
Posts: 87
Joined: Wed May 11, 2011 12:22 am

Re: 3.10.0-1 kernel (latest) won't boot - TonidoPlug2

Postby edruro » Sun Jul 21, 2013 12:06 am

Same problem here. Also with a TonidoPlug2 and an arcNumber of 4101. Kernel 3.9 works fine.

To revert the kernel, had to set arcNumber to 1680 (I think, it's one of the Marvell listed machines in the kernel error). It will boot, but network will not start. Providing you have the kernel 3.9 in the cache, you can revert to it with pacman -U. Don't forget to set the arcNumber to 4101 again.
edruro
 
Posts: 8
Joined: Sat Jul 20, 2013 11:51 pm

Re: 3.10.0-1 kernel (latest) won't boot - TonidoPlug2

Postby moonman » Sun Jul 21, 2013 5:53 am

I'm looking at the patch for kirkwoods and topkick is there, but it doesn't show up in menuconfig. Will try to fix it asap.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: 3.10.0-1 kernel (latest) won't boot - TonidoPlug2

Postby moonman » Sun Jul 21, 2013 9:40 pm

Fixed. 3.10.1-2 has the support for your devices.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: 3.10.0-1 kernel (latest) won't boot - TonidoPlug2

Postby devr » Mon Jul 22, 2013 12:44 am

Upgraded, and worked perfectly. Thank you.
devr
 
Posts: 87
Joined: Wed May 11, 2011 12:22 am

Re: 3.10.0-1 kernel (latest) won't boot - TonidoPlug2

Postby edruro » Mon Jul 22, 2013 6:21 pm

Yep, worked for me too. Thanks.
edruro
 
Posts: 8
Joined: Sat Jul 20, 2013 11:51 pm


Return to Marvell Armada 310

Who is online

Users browsing this forum: No registered users and 4 guests