Need to help on a PogoB01

[atu]

Dear all,

I have a pink pogoB01 and currently can not boot and the green led blinks forever also no ssh, invisible in routers dhcp list.

What I did before it die is that I sshed this box and run the script here
http://archlinuxarm.org/os/oxnas/oxnas-revert.sh

I was hoping to erase previous unsuccessful installation of archlinuxarm. In fact, that installation was aborted automatically due to errors in gunzip the tar ball. Then I tried the original pogo software, it was super slow and I need to wait about 5 minutes to delete a 1MB file in home network. So I thought I was messing up something in the system and want to revert it to the factory status. When I was running that oxnas-revert.sh script, I did not see any error and it returned a "Looks good!". However, after a reboot, the pogo box just looks bad as mentioned in the very beginning of this post.

Any help will be greatly appreciated.

Atu

[WarheadsSE]

1 of 2 choices:
- Serial cable
- SATA boot.

[atu]

$this->bbcode_second_pass_quote('WarheadsSE', '1') of 2 choices:
- Serial cable
- SATA boot.

[WarheadsSE]

SATA - Sticky #1 : [How-To] Boot Entirely from SATA

Serial -
- 3.3v serial RS232, and I have the pinouts marked on my public G+ album for the oxnas.

[atu]

Great! Thanks a lot. I will study it and give it a try.

Atu

$this->bbcode_second_pass_quote('WarheadsSE', 'S')ATA - Sticky #1 : [How-To] Boot Entirely from SATA

Serial -
- 3.3v serial RS232, and I have the pinouts marked on my public G+ album for the oxnas.

[WarheadsSE]

Be sure to read the forums.