[RESOLVED]Seting static IP can't connect to my Pogo Pro

[orney21d]

i 'll going to wipe all partitions and start from the beginning.

Thanks.

[orney21d]

i have remove all partitions but light green keep flashing and can't access to my device (Pogoplug Pro).
How can i start from begining, a keep unable to connect by ssh .
Regards.

[Geoff]

Login to your router and see what addresses are in use. It may be assuming that you will re-use the DHCP lease that you were using previously. If you can clear the DHCP lease table, do that. If that fails, try restarting or power-cycling the router.
Edit: I see my suggestion came too late; I didn't realize you had wiped out the system by the time I responded.

[orney21d]

Pogoplug ip is not in DHCP table in router

[WarheadsSE]

Please stop randomly destroying rootfs's.

Now that you have removed the rootfs' partition, you'll need to recreate and re-extract from another machine.

See the directions on the install page, at the bottom.

[orney21d]

I'm very confused
Thanks.

[orney21d]

can you please tell me the steps ??

[WarheadsSE]

http://archlinuxarm.org/platforms/armv6 ... s-ui-tabs2

Scroll to the bottom.

[orney21d]

I've set up thank you very much

[tomcheng76]

it is better to set DHCP reservation in your router.
https://wiki.archlinux.org/index.php/Co ... IP_address