OXNAS Boards & Support

[WarheadsSE]

At this time we know of the following model numbers using some variation of the OXNAS boards:
PRO
VIDEO
P21
B03
B04

These are the known and thus supported "ceboardver" strings that go along with these boards:
PPRO1
PPROHD1
PPV3

We currently support the installation of Arch Linux ARM via the installer on OXNAS boards that report the above board versions, regardless of model number. For those with non-PCIe enabled boards (all but Pro and Video), a non-PCIe kernel will be loaded and used.

Functionally, these boards are exactly identical with the exception of the PCIe bus' circuitry being missing.

[Fieryphoenix]

Thank you very much for getting this done today. I was prepared, but not happy, to meekly wait the week out. You, sir, have made the end of my day awesome.

[azraleus]

Thank you. Great job, and I really appreciate it. I've just installed on my Pogoplug POGO-B04 with a help from: http://Arch Linux ARM.com/index.php5/Install_on_Pogoplug_Pro instructions. Now, my Ibood's purchase (that cost me only 45eur) is fully configurable linux-equipped system.

[haiku]

Hello,
I just received my Pogo, it's a POGO-E02. Is it based on OXNAS boards ?
Thanks

[WarheadsSE]

Nope, if it is an E02 it is a V2 pinky. Easy way to tell, ssh in and `cat /proc/cpuinfo`. If that says oxnas, it's oxnas, if it says anything about Marvell, it's a V2/dockstar/etc etc etc

[haiku]

Thanks, i'll look later on when i'am at home.. i'm excited

[haiku]

Here for E02 :
Pogoplug:~$ cat /proc/cpuinfo
Processor : ARM926EJ-S rev 1 (v5l)
BogoMIPS : 1192.75
Features : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part : 0x131
CPU revision : 1
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 16384
I assoc : 4
I line length : 32
I sets : 128
D size : 16384
D assoc : 4
D line length : 32
D sets : 128

Hardware : Feroceon-KW
Revision : 0000
Serial : 0000000000000000

[WarheadsSE]

That's definitively a Marvel board. The Feroceon is theirs. V2 for you!

[bharath]

I just received my pogoplug pro. I want to make sure it is the oxnas board

$this->bbcode_second_pass_code('', '
~ # cat /proc/cpuinfo
Processor : ARMv6-compatible processor rev 5 (v6l)
processor : 0
BogoMIPS : 279.34

processor : 1
BogoMIPS : 279.34

Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb02
CPU revision : 5

Hardware : Oxsemi NAS
Revision : 0000
Serial : 0000000000000000
')

$this->bbcode_second_pass_code('', '
~ # cat /tmp/hbplug.log
[19700101-000022][MAIN ][HBPLUG][00] Application Started [VERSION 'LINUX POGOPRO - 2.5.9.5' 'POGOPRO - 0.80']
[19700101-000022][MAIN ][HBPLUG][00] SVCID [BOOTLOADER]: <removed>
[19700101-000022][MAIN ][HBPLUG][00] SKU ID: POGOPRO
[19700101-000022][MAIN ][HBPLUG][00] SKU Name: POGOPRO-E01
[19700101-000022][MAIN ][HBPLUG][00] SKU Friendly Name: Pogoplug Pro
[19700101-000022][MAIN ][HBPLUG][00] CRYPTO KEY: VALID
')

[WarheadsSE]

Yup, that's an oxnas alright.