by belga » Thu Jan 31, 2013 8:54 pm
Hi,
I have a question,
Before installing linux on Pogoplug I have backups of /dev/mtdx, x=0,1,2 obtained from
$this->bbcode_second_pass_code('', 'nanddump -nof mtd0.backup /dev/mtd0
nanddump -nf mtd0.backup.oob ')
I try to give original configuration
$this->bbcode_second_pass_code('', 'flash_erase /dev/mtd0 0 4
nandwrite /dev/mtd0 mtd0.backup
reboot (on pogo without sata
setenv bootcmd "run boot_nand"
saveenv
reset
setenv bootcmd "run boot_nand"
setenv bootargs "root=ubi0:rootfs ubi.mtd=2,512 rootfstype=ubifs console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x25,0x31,0xAA,0xBB,0xCC mem=128 poweroutage=yes"
')
It doesn't work, I had not seen the message telzey
$this->bbcode_second_pass_quote('telzey', 'D')o NOT do that using your full backup of the NAND or you will totally trash you pogo.
I try this
viewtopic.php?f=29&t=1114&start=40#p22767but it does not work
Do you think I can return to the original configuration?