Hi Guys,
I'm trying to get a FTDI 232RL based USB Serial device to work on a PogoPlug Pro.
I have installed the ArchLinuxARM onto a USB memory stick connected to the PogoPlug as per the installation instruction on the website and things appear to work ok.
However when I insert the FTDI device I get the following entries in the log:
$this->bbcode_second_pass_code('', '[ 501.110000] usb 1-1.4: unable to read config index 0 descriptor/start: -110
[ 501.110000] usb 1-1.4: chopping to 0 config(s)
[ 511.110000] usb 1-1.4: string descriptor 0 read error: -110
[ 511.110000] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001
[ 511.110000] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 511.110000] usb 1-1.4: no configuration chosen from 0 choices')
I found the forum post about "OXNAS Kernel Modules (beyond 2011.06 rootfs)" http://archlinuxarm.org/forum/viewtopic.php?f=29&t=1234 and downloaded the tar file and extracted it into the /lib/modules directory and then the PogoPlug would not come up on the LAN.
I then attached the USB stick to another Linux box and renamed the module directory and then extracted the originals from the rootfs image and it would boot again.
So I'm at a loss as to what to do - please help!
Regards
Alex Shepherd