Wireless module warning in dmesg

This forum is for all other ARMv5 devices

Wireless module warning in dmesg

Postby bharath » Sun Sep 11, 2011 6:50 pm

I was wondering if others have noticed these warnings in dmesg when the wireless module is loaded

$this->bbcode_second_pass_code('', '
[ 29.620000] <==== rt28xx_init, Status=0
[ 29.620000] 0x1300 = 00064300
[ 29.630000] AUX_CTRL = 0x 4c02
[ 29.630000] Read AUX_CTRL = 0x4c02
[ 29.640000] Write AUX_CTRL = 0x5c02
[ 29.640000] OSC_CTRL = 0x3ff11
[ 29.640000] ====> rt30xx Read PowerLevelMode = 0x3.
[ 29.650000] ====> rt30xx F Write 0x83 Command = 0x3.
[ 32.270000] ------------[ cut here ]------------
[ 32.270000] WARNING: at kernel/softirq.c:143 local_bh_enable_ip+0x70/0xa0()
[ 32.270000] Modules linked in: rt3390sta gmac mii [last unloaded: xce]
[ 32.270000] [<c002e1fc>] (unwind_backtrace+0x0/0xe0) from [<c0048ac4>] (warn_slowpath_common+0x48/0x60)
[ 32.270000] [<c0048ac4>] (warn_slowpath_common+0x48/0x60) from [<c004dea0>] (local_bh_enable_ip+0x70/0xa0)
[ 32.270000] [<c004dea0>] (local_bh_enable_ip+0x70/0xa0) from [<bf0e3d44>] (RtmpAsicSendCommandToMcu+0x458/0x4a4 [rt3390sta])
[ 32.270000] [<bf0e3d44>] (RtmpAsicSendCommandToMcu+0x458/0x4a4 [rt3390sta]) from [<bf073738>] (T.1819+0x2c/0x38 [rt3390sta])
[ 32.270000] [<bf073738>] (T.1819+0x2c/0x38 [rt3390sta]) from [<bf07f8b4>] (AsicAdjustTxPower+0x26c/0x2d5c [rt3390sta])
[ 32.270000] [<bf07f8b4>] (AsicAdjustTxPower+0x26c/0x2d5c [rt3390sta]) from [<bf03945c>] (STAMlmePeriodicExec+0x254/0xb90 [rt3390sta])
[ 32.270000] [<bf03945c>] (STAMlmePeriodicExec+0x254/0xb90 [rt3390sta]) from [<bf03a22c>] (MlmePeriodicExec+0x494/0x6ac [rt3390sta])
[ 32.270000] [<bf03a22c>] (MlmePeriodicExec+0x494/0x6ac [rt3390sta]) from [<bf06c854>] (rtmp_timer_MlmePeriodicExec+0x1c/0x38 [rt3390sta])
[ 32.370000] [<bf06c854>] (rtmp_timer_MlmePeriodicExec+0x1c/0x38 [rt3390sta]) from [<c0052878>] (run_timer_softirq+0x118/0x200)
[ 32.370000] [<c0052878>] (run_timer_softirq+0x118/0x200) from [<c004dd40>] (__do_softirq+0xa8/0x140)
[ 32.370000] [<c004dd40>] (__do_softirq+0xa8/0x140) from [<c004e198>] (irq_exit+0x84/0xa0)
[ 32.370000] [<c004e198>] (irq_exit+0x84/0xa0) from [<c0028290>] (do_local_timer+0x54/0x70)
[ 32.370000] [<c0028290>] (do_local_timer+0x54/0x70) from [<c0028af8>] (__irq_svc+0x38/0xc0)
[ 32.370000] Exception stack(0xc03cff50 to 0xc03cff98)
[ 32.370000] ff40: 00000000 00000000 c03cff98 00000000
[ 32.370000] ff60: c03ce000 c03f5664 c03d40c4 c03ce000 c0022000 c0023180 c03d3e08 c03f53e0
[ 32.370000] ff80: c0526050 c03cff98 c0029a1c c0029a20 60000013 ffffffff
[ 32.370000] [<c0028af8>] (__irq_svc+0x38/0xc0) from [<c0029a20>] (default_idle+0x24/0x28)
[ 32.370000] [<c0029a20>] (default_idle+0x24/0x28) from [<c0029be8>] (cpu_idle+0x6c/0xa4)
[ 32.470000] [<c0029be8>] (cpu_idle+0x6c/0xa4) from [<c0008a10>] (start_kernel+0x31c/0x384)
[ 32.470000] [<c0008a10>] (start_kernel+0x31c/0x384) from [<60008084>] (0x60008084)
[ 32.470000] ---[ end trace 5feec156c81746b8 ]---
')
bharath
 
Posts: 44
Joined: Sun Sep 04, 2011 3:35 pm

Re: Wireless module warning in dmesg

Postby xenoxaos » Mon Sep 12, 2011 12:22 pm

It's been a while since I messed with the wireless on the Pro, but I do remember having a considerable amount of complaining on dmesg. What you're having looks a little worse than what I had. Does this happen every boot, or just occasionally? Have you tried removing and reloading the wireless module?
Arch Linux ARM exists and continues to grow through community support, please donate today!
xenoxaos
Developer
 
Posts: 323
Joined: Thu Jan 06, 2011 1:45 am

Re: Wireless module warning in dmesg

Postby bharath » Mon Sep 12, 2011 4:40 pm

happens every boot when the wireless driver module gets inserted.
bharath
 
Posts: 44
Joined: Sun Sep 04, 2011 3:35 pm


Return to Community Supported

Who is online

Users browsing this forum: No registered users and 7 guests