usb intel easy camera --> trying to install, but no success.

[ScanxTaz]

Hi,

I'm trying to load the driver 506 from GSPCA (I've identified this drive for the right one to make workinh my webcam), but, I've something weird in front of me...

Take a look :

$this->bbcode_second_pass_code('', '
[root@Pogoplug ~]# cd /lib/modules/3.0-ARCH/kernel/drivers/media/video/gspca/
[root@Pogoplug gspca]# ls -lh
total 292K
drwxr-xr-x 2 root root 4.0K Oct 19 02:04 gl860
-rw-r--r-- 1 root root 2.7K Oct 19 02:03 gspca_benq.ko.gz
-rw-r--r-- 1 root root 5.9K Oct 19 02:03 gspca_conex.ko.gz
-rw-r--r-- 1 root root 6.9K Oct 19 02:03 gspca_cpia1.ko.gz
-rw-r--r-- 1 root root 4.3K Oct 19 02:03 gspca_etoms.ko.gz
-rw-r--r-- 1 root root 2.8K Oct 19 02:03 gspca_finepix.ko.gz
-rw-r--r-- 1 root root 4.3K Oct 19 02:03 gspca_jeilinj.ko.gz
-rw-r--r-- 1 root root 12K Oct 19 02:03 gspca_main.ko.gz
-rw-r--r-- 1 root root 3.9K Oct 19 02:03 gspca_mars.ko.gz
-rw-r--r-- 1 root root 5.6K Oct 19 02:03 gspca_mr97310a.ko.gz
-rw-r--r-- 1 root root 17K Oct 19 02:03 gspca_ov519.ko.gz
-rw-r--r-- 1 root root 5.2K Oct 19 02:03 gspca_ov534_9.ko.gz
-rw-r--r-- 1 root root 6.0K Oct 19 02:03 gspca_ov534.ko.gz
-rw-r--r-- 1 root root 3.7K Oct 19 02:03 gspca_pac207.ko.gz
-rw-r--r-- 1 root root 5.4K Oct 19 02:03 gspca_pac7302.ko.gz
-rw-r--r-- 1 root root 4.4K Oct 19 02:03 gspca_pac7311.ko.gz
-rw-r--r-- 1 root root 3.8K Oct 19 02:03 gspca_sn9c2028.ko.gz
-rw-r--r-- 1 root root 13K Oct 19 02:03 gspca_sn9c20x.ko.gz
-rw-r--r-- 1 root root 7.0K Oct 19 02:03 gspca_sonixb.ko.gz
-rw-r--r-- 1 root root 13K Oct 19 02:03 gspca_sonixj.ko.gz
-rw-r--r-- 1 root root 3.9K Oct 19 02:03 gspca_spca1528.ko.gz
-rw-r--r-- 1 root root 5.9K Oct 19 02:03 gspca_spca500.ko.gz
-rw-r--r-- 1 root root 4.7K Oct 19 02:03 gspca_spca501.ko.gz
-rw-r--r-- 1 root root 3.4K Oct 19 02:03 gspca_spca505.ko.gz
-rw-r--r-- 1 root root 4.0K Oct 19 02:03 gspca_spca506.ko.gz
-rwxrwxrwx 1 root root 4.0K Oct 19 02:03 gspca_spca508.ko.gz
-rw-r--r-- 1 root root 5.5K Oct 19 02:03 gspca_spca561.ko.gz
-rw-r--r-- 1 root root 2.7K Oct 19 02:03 gspca_sq905c.ko.gz
-rw-r--r-- 1 root root 3.1K Oct 19 02:03 gspca_sq905.ko.gz
-rw-r--r-- 1 root root 6.2K Oct 19 02:03 gspca_sq930x.ko.gz
-rw-r--r-- 1 root root 4.3K Oct 19 02:03 gspca_stk014.ko.gz
-rw-r--r-- 1 root root 2.8K Oct 19 02:03 gspca_stv0680.ko.gz
-rw-r--r-- 1 root root 6.7K Oct 19 02:03 gspca_sunplus.ko.gz
-rw-r--r-- 1 root root 6.7K Oct 19 02:03 gspca_t613.ko.gz
-rw-r--r-- 1 root root 2.8K Oct 19 02:03 gspca_tv8532.ko.gz
-rw-r--r-- 1 root root 12K Oct 19 02:03 gspca_vc032x.ko.gz
-rw-r--r-- 1 root root 16K Oct 19 02:03 gspca_zc3xx.ko.gz
drwxr-xr-x 2 root root 4.0K Oct 19 02:04 m5602
drwxr-xr-x 2 root root 4.0K Oct 19 02:03 stv06xx
[root@Pogoplug gspca]# modprobe /lib/modules/3.0-ARCH/kernel/drivers/media/video/gspca/gspca_spca508.ko.gz
FATAL: Module /lib/modules/3.0_ARCH/kernel/drivers/media/video/gspca/gspca_spca508.ko.gz not found.
[root@Pogoplug gspca]#

')

What's the explanation ??? All rights are opened, I don't understand...

[WarheadsSE]

`uname -a` doesn't read 3.0-ARCH does it? Those kernel modules are mainline 3.0, which oxnas's arent yet.

[ScanxTaz]

does it mean that I've to forget to install this cam under archlinux ?