PogoPlug Pro Blinking Green LED

[dinjo]

I tried starting Pogo Plug pro in the morning and it was showing blinking green led in front not sure what happened but seems like my usb is not working anymore so i formatted another drive to ext3 and extracted the rootfs tarball and plugged in but still the led keeps blinking also i cannot see the device in ARP nor DHCP.I even tried unplugging the usb but still nothing comes in DHCP.

[WarheadsSE]

You did re-extract as root, not sudo correct? Or at least sudo su (aka root on ubuntu)

[dinjo]

I tried mounting the drive on Ubuntu but could not mount successfully as rw only r , but shouldnt pogo be recognized in DHCP with its IP ?

[dinjo]

Update: Was able to start pogo again didn't knew the user on ubuntu wasn't root so did a sudo su extracted the tar and add the mac_addr file and yes its up and running.

[WarheadsSE]

If you're LED is still blinking,

depmod -a
modprobe oxnas-led

This is a do-once-per-install, and should be fixed in the next rootfs.

[dinjo]

Yes no led is blinking as i did a depmod -a right after the extract.

[brommetje]

Solved problem "blinking Green LED" with adding a sleep into the /etc/rc.d/network script
Looks like this :
#!/bin/bash

. /etc/rc.conf
. /etc/rc.d/functions

echo ":: Sleep 10 (DHCP) !!!" ; sleep 10
...
rest of the script

Now it works fine !!!