Dear all,
I tryed to recovery my pogo, but, due my inesperience, some step in this procedure is unclear to me.
1) I connect to my pc running debian, a sata disk.
2) I dowload the tarball:
http://ppl.ug/r1LnA0CT83U and extract in a folder
3) I edit the `disk_create` script to match the disk (in my case the address was sda)
4) run ./ disk_create (I did not achive any error)
5) for partitioning I used gparted (I don't know Fdisk command). I creted a primary partition dos fat16 with the first sector being 2048, of 16MB (sda1). After that i created the other primary partition (sda2) formatted ext3.
6) installed kernel running disk_create script editing it sda1 in order to place it into /dev/sda1
7) i mounted the formatted de/sda2 and I extracted into the oxnas rootfs. I also edit usr/local/mac_addr adding the pogo's mac address.
8) this stap is unclear. Anyway I digit 'sync' on terminal, and mounted the device.
9) I attached the device direct sata, apply the power
But the logo light stay off and I can't reach the device via ssh.
Do I forget to do some steps?
Thanks in advance
Ionny