[How-To] Boot Entirely from SATA

This forum is for all other ARMv5 devices

Re: [How-To] Boot Entirely from SATA

Postby gregger2k » Fri Jan 06, 2012 8:28 pm

WarheadSE,

Thanks for the upgraded script. Works great.. no serial needed. :D
What will we need to do install your new kernel when it is available?

Greg
gregger2k
 
Posts: 3
Joined: Fri Dec 23, 2011 12:29 am

Re: [How-To] Boot Entirely from SATA

Postby WarheadsSE » Fri Jan 06, 2012 8:40 pm

when it becomes available:
Code: Select all
dd if=/blarg of=/dev/sda1 bs=512


That's what part of the disk_create script does.
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 6807
Joined: Mon Oct 18, 2010 2:12 pm

Re: [How-To] Boot Entirely from SATA

Postby Telemachus » Tue Jan 10, 2012 9:22 am

Took another stab at this tonight... and very excited to see ALARM on my list of devices on the router!

I have an 80 gig 3.5inch SATA that I am powering from a computer power supply and directly plugged into the internal SATA port on the pogo plug. Using a cheap amazon SATA to USB converter on laptop running a live version of Archlinux (Ubunto wasn't working for me) to setup the drive.

What seems to have held me up was getting the partitioning sectors right on the first partition, but now I'm there. I didn't expect the LED to keep blinking, but owell!

Thanks for the detailed tutorial. Follow the steps to the tee, and it works!

Here is the post from WarheadsSE that documents mounting the ubifs (internal memory of Pogo) if anyone needs it:

viewtopic.php?f=29&t=1337&p=7546&hilit=ubifs+mount#p7546
Telemachus
 
Posts: 14
Joined: Fri Dec 16, 2011 6:12 pm

Re: [How-To] Boot Entirely from SATA

Postby PKG » Sun Jan 15, 2012 12:18 am

Will the plug be faster with SATA instead of USB? (even if I dont OC?)
PKG
 
Posts: 26
Joined: Thu Jun 30, 2011 8:57 pm

Re: [How-To] Boot Entirely from SATA

Postby WarheadsSE » Sun Jan 15, 2012 4:06 am

In the 2.6.31 kernel, the SATA is capable of > 60MB/s, where as the USB is clocked at load to be between 10-22MB/s for HDD access. Of course, the busier the USB, the slower it gets. There is a noticable performance difference, especially when it comes to using swap.
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 6807
Joined: Mon Oct 18, 2010 2:12 pm

Re: [How-To] Boot Entirely from SATA

Postby Guest » Mon Jan 16, 2012 7:59 pm

Hi,

I would ask some help booting from SATA.

I have Pogoplug Classic P24 with Alarm installed.
No problem with booting ALARM from USB HDD, but would like to boot from sata.

Followed instruction from first post here, but failed to boot sata.
Symptom: Pogo start blinking but after 5-10 blink stop it and became black. No ping no ethernet activity of course no ssh.

I built a serial connection and now it is clear where it is stopped - But not for me. :)
(By the way I will do a serial howto for newbes like me. :) )

Can you please WarheadsSE help me?

What is the problem?

Code: Select all
Welcome to minicom 2.4

OPTIONS: I18n
Compiled on Jan 25 2010, 06:49:09.
Port /dev/ttyUSB0

Press CTRL-A Z for help on special keys                                                   
                                                                                           
Stage-1 Bootloader Mon Nov 14 22:15:13 EST 2011                                           
Attempting to set PLLA to 700MHz ...                                                       
  plla_ctrl0 : 0x0000000A                                                                 
  plla_ctrl1 : 0x000E0000
  plla_ctrl2 : 0x001B01A0
  plla_ctrl3 : 0x00000016
PLLA Set

Setup memory, testing
Reading disk 0, Image 0
  Sector : 0x0000009A
  Hdr len: 0x0001FB34
  Hdr CRC: 0x2229BDCD
 OK
Initialising disks
SATA PHY not ready for device 1
Detecting SATA busses:
Bus 0: Found first device OK
  Device 0: Model: WDC WD800BEAS-00RRT0 Firm: 04.01G04 Ser#: WD-WXE208C02426
            Type: Hard Disk
            Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
  Device 1: not available
Failed to read valid environment from disk, using built-in default


U-Boot 1.1.2 (Dec 31 2011 - 15:24:45)

U-Boot code: 60E00000 -> 60E1FB34  BSS: -> 60E5435C
RAM Configuration:
        Bank #0: 60000000 128 MB
SRAM Configuration:
        64KB at 0x50000000
NAND:128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Setting Linux mem= boot arg value

IDE read: device 0 block # 288, count 1 ... 1 blocks read: OK
Hit any key to stop autoboot:  0

Loading from IDE device 0, partition 1: Name: hda1
  Type: U-Boot
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2132260 Bytes =  2 MB
   Load Address: 60008000
   Entry Point:  60008000
## Booting image at 60500000 ...
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2132260 Bytes =  2 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................. done, b.
[    0.000000] Linux version 2.6.31.6_SMP_820 (root@ProDev) (gcc version 4.6.0 20110429 (prerelease) (GCC) ) #99 SMP Sun May 29 03:04:43 EDT 2011
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Oxsemi NAS
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=/dev/sda2 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 rootwait ubi.mtd=2,512 mem=128M ps
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125524KB available (3636K code, 296K data, 128K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:96
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.010000] Console: colour dummy device 80x30
[    0.010000] console [ttyS0] enabled
[    0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.260000] Security Framework initialized
[    0.260000] Mount-cache hash table entries: 512
[    0.270000] CPU: Testing write buffer coherency: ok
[    0.270000] Calibrating local timer... 350.00MHz.
[    0.340000] CPU1: Booted secondary processor
[    0.440000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.670000] Brought up 2 CPUs
[    0.680000] SMP: Total of 2 processors activated (558.69 BogoMIPS).
[    0.690000] NET: Registered protocol family 16
[    0.690000] Number of DMA channels = 4, version = 4
[    0.700000] Reserving a DMA channel for DirectRAID
[    0.700000] Allocating 389 SRAM generic DMA descriptors

Guest
 

Re: [How-To] Boot Entirely from SATA

Postby elazar » Mon Jan 16, 2012 8:14 pm

robert1968,
I believe the P24 does not have PCI, are you using the PCI image(uImage.pci) by any chance? If yes, try the non-PCI kernel(uImage).

elazar
elazar
 
Posts: 15
Joined: Mon Jan 16, 2012 7:07 pm

Re: [How-To] Boot Entirely from SATA

Postby Guest » Mon Jan 16, 2012 8:22 pm

Hi Elazar,

Thank You!
You probably right!
@uImage symlinked to pci
Code: Select all
lrwxrwxrwx 1 root root   18 2012-01-15 18:15 uImage -> uImages/uImage.pci


I will recreate disk and refer results.

Robert
Guest
 

Re: [How-To] Boot Entirely from SATA

Postby Guest » Mon Jan 16, 2012 9:02 pm

Hi Elazar,

Bingo! THank you very much!!!
Booting succesfully!!

Solution for P24 -
Code: Select all
drwxr-xr-x 2 root root 4096 2011-12-20 02:24 stage1
lrwxrwxrwx 1 root root   24 2012-01-16 21:38 stage1.wrapped -> stage1/stage1.wrapped700
drwxr-xr-x 2 root root 4096 2011-12-20 02:12 u-boot
lrwxrwxrwx 1 root root   21 2012-01-15 18:15 u-boot.wrapped -> u-boot/u-boot.wrapped
drwxr-xr-x 2 root root 4096 2011-12-20 02:26 uImages
lrwxrwxrwx 1 root root   20 2012-01-16 21:33 uImage -> uImages/uImage.nopci


For log :
user root
password root

Only question: why led is blinking? - OK Found: depmod -a :))) No question....

Regards,
Robert


Code: Select all
Welcome to minicom 2.4

OPTIONS: I18n
Compiled on Jan 25 2010, 06:49:09.
Port /dev/ttyUSB0

Press CTRL-A Z for help on special keys                                                   
                                                                                           
Stage-1 Bootloader Mon Nov 14 22:15:13 EST 2011                                           
Attempting to set PLLA to 700MHz ...                                                       
  plla_ctrl0 : 0x0000000A                                                                 
  plla_ctrl1 : 0x000E0000
  plla_ctrl2 : 0x001B01A0
  plla_ctrl3 : 0x00000016
PLLA Set

Setup memory, testing
Reading disk 0, Image 0
  Sector : 0x0000009A
  Hdr len: 0x0001FB34
  Hdr CRC: 0x2229BDCD
 OK
Initialising disks
SATA PHY not ready for device 1
Detecting SATA busses:
Bus 0: Found first device OK
  Device 0: Model: WDC WD800BEAS-00RRT0 Firm: 04.01G04 Ser#: WD-WXE208C02426
            Type: Hard Disk
            Capacity: 76319.0 MB = 74.5 GB (156301488 x 512)
  Device 1: not available
Failed to read valid environment from disk, using built-in default


U-Boot 1.1.2 (Dec 31 2011 - 15:24:45)

U-Boot code: 60E00000 -> 60E1FB34  BSS: -> 60E5435C
RAM Configuration:
        Bank #0: 60000000 128 MB
SRAM Configuration:
        64KB at 0x50000000
NAND:128 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Setting Linux mem= boot arg value

IDE read: device 0 block # 288, count 1 ... 1 blocks read: OK
Hit any key to stop autoboot:  0

Loading from IDE device 0, partition 1: Name: hda1
  Type: U-Boot
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2159884 Bytes =  2.1 MB
   Load Address: 60008000
   Entry Point:  60008000
## Booting image at 60500000 ...
   Image Name:   Linux-2.6.31.6_SMP_820
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2159884 Bytes =  2.1 MB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................... done,.
[    0.000000] Linux version 2.6.31.6_SMP_820 (root@ProDev) (gcc version 4.6.0 20110429 (prerelease) (GCC) ) #100 SMP Sun May 29 04:53:45 EDT 2011
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Oxsemi NAS
[    0.000000] 1 memory region
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: root=/dev/sda2 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 rootwait ubi.mtd=2,512 mem=128M ps
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125496KB available (3692K code, 291K data, 124K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:96
[    0.000000] OX820_RPS_init_irq: interrupts 64 to 96
[    0.010000] Console: colour dummy device 80x30
[    0.010000] console [ttyS0] enabled
[    0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.260000] Security Framework initialized
[    0.260000] Mount-cache hash table entries: 512
[    0.270000] CPU: Testing write buffer coherency: ok
[    0.270000] Calibrating local timer... 349.99MHz.
[    0.340000] CPU1: Booted secondary processor
[    0.440000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
[    0.670000] Brought up 2 CPUs
[    0.680000] SMP: Total of 2 processors activated (558.69 BogoMIPS).
[    0.690000] NET: Registered protocol family 16
[    0.690000] Number of DMA channels = 4, version = 4
[    0.700000] Reserving a DMA channel for DirectRAID
[    0.700000] Allocating 389 SRAM generic DMA descriptors
[    0.720000] bio: create slab <bio-0> at 0
[    0.730000] SCSI subsystem initialized
[    0.730000] usbcore: registered new interface driver usbfs
[    0.740000] usbcore: registered new interface driver hub
[    0.740000] usbcore: registered new device driver usb
[    0.780000] NET: Registered protocol family 2
[    0.780000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.790000] Switched to NOHz mode on CPU #0
[    0.790000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.790000] Switched to NOHz mode on CPU #1
[    0.800000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.810000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.810000] TCP reno registered
[    0.820000] NET: Registered protocol family 1
[    0.820000] Create fragment cache
[    0.830000] fuse init (API version 7.12)
[    0.830000] msgmni has been set to 245
[    0.840000] alg: No test for stdrng (krng)
[    0.850000] io scheduler noop registered
[    0.850000] io scheduler anticipatory registered
[    0.850000] io scheduler deadline registered
[    0.860000] io scheduler cfq registered (default)
[    0.880000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.890000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
[    0.900000] brd: module loaded
[    0.910000] loop: module loaded
[    0.920000] ox820sata: OX820 sata core.
[    0.920000] scsi0 : oxnassata
[    0.920000] scsi1 : oxnassata
[    0.930000] ata1: SATA max UDMA/133 irq 50
[    0.930000] ata2: SATA max UDMA/133 irq 50
[    0.940000] ox820sata: reseting SATA core
[    1.460000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.520000] ata1.00: ATA-7: WDC WD800BEAS-00RRT0, 04.01G04, max UDMA/133
[    1.520000] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    1.530000] ata1.00: configured for UDMA/133
[    1.540000] ox820sata: reseting SATA core
[    2.250000] ata2: SATA link down (SStatus 0 SControl 300)
[    2.250000] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEAS-00 04.0 PQ: 0 ANSI: 5
[    2.260000] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.270000] sd 0:0:0:0: [sda] Write Protect is off
[    2.270000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.280000] tun: Universal TUN/TAP device driver, 1.6
[    2.280000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.280000] NAND: Page read time 40ms
[    2.280000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit)
[    2.280000] Scanning device for bad blocks
[    2.350000]  sda:
[    2.350000] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    2.360000] 0x000000000000-0x000000e00000 : "boot"
[    2.360000] 0x000000e00000-0x000008000000 : "rootfs"
[    2.370000] UBI: attaching mtd2 to ubi0
[    2.370000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
[    2.380000] UBI: logical eraseblock size:    129024 bytes
[    2.380000] UBI: smallest flash I/O unit:    2048
[    2.390000] UBI: sub-page size:              512
[    2.390000] UBI: VID header offset:          512 (aligned 512)
[    2.400000] UBI: data offset:                2048
[    2.810000]  sda1 sda2
[    2.810000] UBI: attached mtd2 to ubi0
[    2.820000] UBI: MTD device name:            "rootfs"
[    2.820000] UBI: MTD device size:            114 MiB
[    2.830000] UBI: number of good PEBs:        912
[    2.830000] UBI: number of bad PEBs:         0
[    2.840000] UBI: max. allowed volumes:       128
[    2.840000] UBI: wear-leveling threshold:    4096
[    2.850000] UBI: number of internal volumes: 1
[    2.850000] UBI: number of user volumes:     1
[    2.860000] UBI: available PEBs:             0
[    2.860000] UBI: total number of reserved PEBs: 912
[    2.860000] UBI: number of PEBs reserved for bad PEB handling: 9
[    2.870000] UBI: max/mean erase counter: 2/0
[    2.880000] UBI: image sequence number: 0
[    2.880000] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.880000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.890000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
[    2.900000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
[    2.900000] UBI: background thread "ubi_bgt0d" started, PID 301
[    2.930000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
[    2.950000] oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
[    2.950000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.960000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.960000] usb usb1: Product: OXNAS EHCI Host Controller
[    2.970000] usb usb1: Manufacturer: Linux 2.6.31.6_SMP_820 ehci_hcd
[    2.980000] usb usb1: SerialNumber: usb
[    2.980000] usb usb1: configuration #1 chosen from 1 choice
[    2.990000] hub 1-0:1.0: USB hub found
[    2.990000] hub 1-0:1.0: 2 ports detected
[    3.000000] Initializing USB Mass Storage driver...
[    3.000000] usbcore: registered new interface driver usb-storage
[    3.010000] USB Mass Storage support registered.
[    3.010000] mice: PS/2 mouse device common for all mice
[    3.020000] TCP cubic registered
[    3.020000] NET: Registered protocol family 10
[    3.030000] NET: Registered protocol family 17
[    3.030000] RPC: Registered udp transport module.
[    3.040000] RPC: Registered tcp transport module.
[    3.140000] kjournald starting.  Commit interval 5 seconds
[    3.140000] EXT3 FS on sda2, internal journal
[    3.150000] EXT3-fs: mounted filesystem with writeback data mode.
[    3.150000] VFS: Mounted root (ext3 filesystem) on device 8:2.
[    3.160000] Freeing init memory: 124K
[    3.310000] usb 1-1: new high speed USB device using oxnas-ehci and address 2
INIT: version 2.88 booting
[    3.460000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    3.460000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.470000] usb 1-1: Product: USB2.0 Hub
[    3.480000] usb 1-1: configuration #1 chosen from 1 choice
[    3.480000] hub 1-1:1.0: USB hub found
[    3.490000] hub 1-1:1.0: 4 ports detected
 
 > Arch Linux ARM
 
 > http://www.archlinuxarm.org

   ------------------------------
:: Mounting Root Read-Only    [BUSY]    [FAIL]
:: Adjusting system time and setting kernel timezone    [BUSY]    [DONE]
:: Starting UDev Daemon    [BUSY]    [DONE]
:: Triggering UDev uevents    [BUSY]    [DONE]
:: Loading Modules    [BUSY] [    5.450000] Probing for Synopsis GMAC, unit 0
[    5.460000] eth0: Tuning GMAC 0 RGMII timings
[    5.460000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[    5.470000] eth0: GMAC ver = 53, vendor ver = 18 at 0xed400000, IRQ 40
[    5.470000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
[    5.480000] eth0: Ethernet addr: 00:30:e0:00:00:00
[    5.490000] probe() eth0: Leon x2 clock
   [DONE]
:: Waiting for UDev uevents to be processed    [BUSY] [    6.400000] VFS: Can't find ext3 filesystem on dev sda1.
[    6.400000] VFS: Can't find an ext2 filesystem on dev sda1.
   [DONE]
:: Bringing up loopback interface    [BUSY]    [DONE]
:: Checking Filesystems    [BUSY]    [DONE]
:: Remounting Root Read/Write    [BUSY]    [FAIL]
:: Creating mtab    [BUSY]    [DONE]
:: Mounting Local Filesystems    [BUSY]    [DONE]
:: Activating Swap    [BUSY]    [DONE]
:: Configuring Time Zone    [BUSY]    [DONE]
:: Removing Leftover Files    [BUSY]    [DONE]
:: Setting Hostname: alarm    [BUSY]    [DONE]
:: Setting Locale: en_US.UTF-8    [BUSY]    [DONE]
:: Setting Consoles to UTF-8 mode    [BUSY]    [DONE]
:: Loading Keyboard Map: us    [BUSY]    [DONE]
:: Saving dmesg Log    [BUSY]    [DONE]
INIT: Entering runlevel: 3
:: Setting MAC address    [BUSY] FATAL: Module oxnas_led not found.
AMBER
GREEN
[    9.560000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[    9.570000] CoPro offload is active on eth0
[    9.570000] Alloc'ing ARM descs 8192 bytes
[    9.580000] Alloc'ing CoPro parameters 36 bytes
[    9.580000] gmac gmac.0: firmware: requesting gmac_copro_firmware
[    9.630000] CoPro: Programming start address as 0xd000e000
[    9.740000] eth0: Resetting GMAC
[    9.740000] eth0: GMAC reset complete
[    9.750000] eth0: Setting Rx flow control thresholds for LAN port
[   10.300000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
[   10.800000] eth0: link down
[   12.760000] ADDRCONF(NETDEV_UP): eth0: link is not ready
   [DONE]
[   12.800000] eth0: link up, 100Mbps, full-duplex, using pause, lpa 0x45E1
[   12.800000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
:: Starting Syslog-NG    [BUSY]    [DONE]
:: Starting Network    [BUSY]    [DONE]
:: Mounting Network Filesystems    [BUSY]    [DONE]
:: Starting crond daemon    [BUSY]    [DONE]
:: Starting Secure Shell Daemon    [BUSY] ssh-keygen: generating new host keys: RSA1 RSA DSA ECDSA
   [DONE]
:: Starting OpenNTPD    [BUSY]    [DONE]

Arch Linux 2.6.31.6_SMP_820  (alarm) (ttyS0)

alarm login: root
Password:

Login incorrect
alarm login:
Login timed out after 60 seconds.

Arch Linux 2.6.31.6_SMP_820  (alarm) (ttyS0)

alarm login:
Guest
 

Re: [How-To] Boot Entirely from SATA

Postby WarheadsSE » Mon Jan 16, 2012 9:13 pm

I get busy for an afternoon, and ya'll start taking care of each other ;) :lol:
Core Developer
Remember: Arch Linux ARM is entirely community donation supported!
WarheadsSE
Developer
 
Posts: 6807
Joined: Mon Oct 18, 2010 2:12 pm

PreviousNext

Return to Community Supported

Who is online

Users browsing this forum: No registered users and 2 guests