by Trav08x » Tue Jul 03, 2012 3:37 am
$this->bbcode_second_pass_quote('bastafidli', 'T')his didn't work for me
$this->bbcode_second_pass_quote('WarheadsSE', '
')1 - reformat the drive
2 - extract the 2012.05 rootfs
3 - extract update-oxnas to root/
4 - copy & replace root/update-oxnas/lib/modules/ to lib/modules/
5 - Boot.
6 - login as root
7 - cd update-oxnas
9 - nano update-oxnas.sh
10 - edit the nand_write command to read uImage.pci instead of uImage.nopci (because you have a pro)
11 - ./update-oxnas.sh
12 - either wipe & extract the 2012.06 oxnas rootfs (skipping the package hiccups around hwids, filesystem, etc), or pacman -Syu and go the round-about.
After step
4 - copy & replace root/update-oxnas/lib/modules/ to lib/modules/
5 - Boot.
I never got an IP address
But this worked for me
1 - reformat the drive
2 - extract the 2012.05 rootfs + update mac_addr + update rc.conf (timezone, etc.)
3 - Boot.
4 - login as root
<span>5 - wget <a class="smarterwiki-linkify" href="http://archlinuxarm.org/os/oxnas/update-oxnas.tar.gz">http://archlinuxarm.org/os/oxnas/update-oxnas.tar.gz</a></span>
6 - tar xzf update-oxnas.tar.gz -C /
7 - cd /update-oxnas/
8 - nano update-kernel.sh and
replace the line in the script by replacing this
nandwrite -p -s 0x500000 /dev/mtd1 boot/uImage.nopci
with this
nandwrite -p -s 0x500000 /dev/mtd1 boot/uImage.pci
since I am on Pro
9. ./update-kernel.sh
10. :: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n] n
11. Targets (2): libaccept4-0.1.0-2 mtd-utils-1.4.1-1
Total Download Size: 0.19 MiB
Total Installed Size: 1.01 MiB
Proceed with installation? [Y/n] y
12 - reformat the drive
13 - extract the 2012.06 rootfs
Thanks a lot for all the work you have done!
I was so frustrated, I was about to give up. Thanks