I want to use my ur054g usb wifi adapter with pogoplug B01 pink,the chip is isl3887,but it seems that only rt3390sta.ko is there,any other wifi adapters are not supported.
lsusb shows
$this->bbcode_second_pass_code('', 'Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 14cd:6116 Super Top M6116 SATA Bridge
Bus 001 Device 004: ID 1435:0427 Wistron NeWeb UR054g 802.11g Wireless Adapter [Intersil ISL3887]
Bus 001 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)')
line 4 is my wireless adapter
dmesg shows
$this->bbcode_second_pass_code('', '[ 6.080000] usb 1-1.3: New USB device found, idVendor=1435, idProduct=0427
[ 6.090000] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.090000] usb 1-1.3: Product: Cohiba 3887 rev0
[ 6.100000] usb 1-1.3: Manufacturer: GlobespanVirata
[ 6.100000] usb 1-1.3: uevent
[ 6.100000] usb 1-1.3: usb_probe_device
[ 6.100000] usb 1-1.3: configuration #1 chosen from 1 choice
[ 6.110000] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
[ 6.110000] usb 1-1.3:1.0: uevent
[ 6.110000] drivers/usb/core/inode.c: creating file '004'
[ 6.110000] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008
')
I've already looked up in google,they are all talking about downloading firmware from http://wireless.kernel.org/en/users/Drivers/p54
I put the firmwire in both /lib/firmware and /usr/local/lib/firmware,because I don't know which dir is correct,most distribution use /lib/firmware,but archlinuxarm seems otherwise.
I think maybe I need p54usb.ko copied into /lib/modules/2.6.31.6_SMP_820/kernel/drivers/net/wireless/,but where can I find it? compile the kernel again?