Okay, so I've seen people saying you need to change the boot params to allow the oxnas pro to boot from a different partition, but nobody says how to go about doing it.
for example, say I want a separate BOOT and ROOT partition.... I know how to do this on the pink pogoplug, but not on the oxnas pogoplug pro.
How do I tell it that rootfs is /dev/sda2 instead of /dev/sda1?
Also, lets suppose I want to have the plug boot from USB, but still have a drive plugged into SATA...
So I essentially want it to boot from /dev/sdb1 instead of /dev/sda1 (since the SATA will always get sda)
then lets go one step further and combine these two... lets suppose, I want to boot from sdb with the boot partition on /dev/sdb1 and the root partition on /dev/sdb2 and my SATA drive on /dev/sda1
Can anyone point me in the right direction here.... I'm guessing its just sending the right commands to blparam
But what are those commands....