restore to stock rom/image

[leckmaul666]

pls help me i studied some solutions... perhabs. but i dont know how i get this going on!

i want to get my box (just sata booting, usb nooooo) into a officical box with standard software.
i tried the oxnas-reverted thing. ok. good infos, but no restart without blinking led no usb booting.

so i did download 2 thing:
the ce_pogoproramdisk and the ce_pogoproroot.tar.

but i dont know. how i get this things per ssh from my pc (or sata.hdd) into my box. i hope then the box is stockrom

pls help me
i tried everything...
warhead u are my only help :=)

[WarheadsSE]

You might need tftp & a few lines to reflash to pure stock using those. Do you have serial?

[leckmaul666]

no serial
is it per sata possible?
ssh?

[WarheadsSE]

See if you can mount the CE rootfs.

[Socaltom]

Here is the command to mount the CE rootfs

$this->bbcode_second_pass_code('', '
#make directory if it doesn't exist
mkdir /tmp/ce
# mount NAND fs.
mount -t ubifs -o ro ubi0:rootfs /tmp/ce
')

Tom

[leckmaul666]

ok- its ok look:

$this->bbcode_second_pass_code('', 'Last login: Sat Jan 12 18:26:09 2013 from 192.168.2.2
[root@alarm ~]# mkdir /tmp/ce
[root@alarm ~]# mount -t ubifs -o ro ubi0:rootfs /tmp/ce
[root@alarm ~]#')

then i check the dir. and there are all things there
(bin dev etc lib etc...)

its good. and now?
what could i do next?

[WarheadsSE]

Good. Then we might be able to get you an image dump of the stock kernel to write at the correct place & let it attempt to boot. One of those shoot & prays since you don't have a serial cable to see exactly what is happening.

[leckmaul666]

lets shot. tell me pls h

[leckmaul666]

ok warhead, boss

how can i press the image dump of the stock kernel to write at the correct place?
i will try it one more time, then i will give it up...

stand by me, friend of mine!

lets rock and roll

[WarheadsSE]

We need a dump of mtd1, offset 0x200000, length ~22 blocks. Then I'll have to find the right nandwrite settings (should be somewhere in the thread with recovery ...