Pro Unit won't Boot

This forum is for all other ARMv5 devices

Pro Unit won't Boot

Postby alfanerd » Wed Mar 13, 2013 2:26 pm

I found a Pogoplug Pro unit at a garage sale, got it home and found the network light flashed but it wouldn't boot. I gained serial access and found it was stopping at:

## Error: "boot_nand" not defined

My research comes up blank when searching for this error. Can anyone provide a clue or link on where to go from here?
alfanerd
 
Posts: 1
Joined: Wed Mar 13, 2013 2:15 pm

Re: Pro Unit won't Boot

Postby Geoff » Wed Mar 13, 2013 5:49 pm

As you've already opened it up, I would suggest hooking up the SATA connector to a HDD that's set up for SATA booting. Then you won't have to care what's in the NAND. Once you have that working well, you can look at the NAND and fix it up if you feel like it.
Geoff
 
Posts: 231
Joined: Wed Mar 09, 2011 5:14 pm


Return to Community Supported

Who is online

Users browsing this forum: No registered users and 3 guests