I have some serious problems getting systemd and dhcpd working as i would like it to.
I have a wifi card in it (wlp2s0) but i dont get it working with dhcpd. The clearfog pro should work as a router and wifi AP.
This is my current boot log:
$this->bbcode_second_pass_code('', '
Dec 25 12:45:59 alarm systemd[1]: Time has been changed
Dec 25 12:45:59 alarm systemd[1]: Started Network Time Synchronization.
Dec 25 12:45:59 alarm systemd[1]: Reached target System Time Synchronized.
Dec 25 12:45:59 alarm systemd[1]: Started udev Coldplug all Devices.
Dec 25 12:45:59 alarm systemd[1]: Reached target System Initialization.
Dec 25 12:45:59 alarm kernel: evbug: Connected device: input0 (gpio-keys at gpio-keys/input0)
Dec 25 12:45:59 alarm systemd[1]: Started Daily Cleanup of Temporary Directories.
Dec 25 12:45:59 alarm systemd[1]: Started Daily verification of password and group files.
Dec 25 12:45:59 alarm systemd[1]: Started Daily rotation of log files.
Dec 25 12:45:59 alarm systemd[1]: Listening on D-Bus System Message Bus Socket.
Dec 25 12:45:59 alarm systemd[1]: Reached target Sockets.
Dec 25 12:46:00 alarm systemd[1]: Reached target Basic System.
Dec 25 12:46:00 alarm systemd[1]: Starting IPv6 Packet Filtering Framework...
Dec 25 12:46:00 alarm kernel: ehci-orion: EHCI orion driver
Dec 25 12:46:00 alarm kernel: orion-ehci f1058000.usb: EHCI Host Controller
Dec 25 12:46:00 alarm kernel: orion-ehci f1058000.usb: new USB bus registered, assigned bus number 5
Dec 25 12:46:00 alarm systemd[1]: Starting Packet Filtering Framework...
Dec 25 12:46:00 alarm kernel: orion-ehci f1058000.usb: irq 41, io mem 0xf1058000
Dec 25 12:46:00 alarm kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Dec 25 12:46:00 alarm systemd[1]: Started D-Bus System Message Bus.
Dec 25 12:46:00 alarm audit: NETFILTER_CFG table=filter family=10 entries=0
Dec 25 12:46:00 alarm kernel: audit: type=1325 audit(1482666360.157:2): table=filter family=10 entries=0
Dec 25 12:46:00 alarm audit[2581]: SYSCALL arch=40000028 syscall=128 per=800000 success=yes exit=0 a0=b6731008 a1=4d44 a2=2aa58 a3=f4ce6400 items=0 ppid=6 pid=2581 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 t
Dec 25 12:46:00 alarm kernel: orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
Dec 25 12:46:00 alarm kernel: audit: type=1300 audit(1482666360.157:2): arch=40000028 syscall=128 per=800000 success=yes exit=0 a0=b6731008 a1=4d44 a2=2aa58 a3=f4ce6400 items=0 ppid=6 pid=2581 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fs
Dec 25 12:46:00 alarm kernel: audit: type=1325 audit(1482666360.187:3): table=filter family=2 entries=0
Dec 25 12:46:00 alarm audit: NETFILTER_CFG table=filter family=2 entries=0
Dec 25 12:46:00 alarm kernel: audit: type=1300 audit(1482666360.187:3): arch=40000028 syscall=128 per=800000 success=yes exit=0 a0=b671b008 a1=5070 a2=2aa58 a3=6737d900 items=0 ppid=1172 pid=2585 auid=4294967295 uid=0 gid=0 euid=0 suid=0
Dec 25 12:46:00 alarm kernel: audit: type=1327 audit(1482666360.157:2): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D006970367461626C655F66696C746572
Dec 25 12:46:00 alarm kernel: audit: type=1325 audit(1482666360.287:4): table=filter family=10 entries=4
Dec 25 12:46:00 alarm kernel: audit: type=1300 audit(1482666360.287:4): arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=29 a2=40 a3=c167f0 items=0 ppid=1 pid=2572 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 s
Dec 25 12:46:00 alarm audit[2585]: SYSCALL arch=40000028 syscall=128 per=800000 success=yes exit=0 a0=b671b008 a1=5070 a2=2aa58 a3=6737d900 items=0 ppid=1172 pid=2585 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=
Dec 25 12:46:00 alarm audit: PROCTITLE proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D006970367461626C655F66696C746572
Dec 25 12:46:00 alarm audit: NETFILTER_CFG table=filter family=10 entries=4
Dec 25 12:46:00 alarm audit[2572]: SYSCALL arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=29 a2=40 a3=c167f0 items=0 ppid=1 pid=2572 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=
Dec 25 12:46:00 alarm kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Dec 25 12:46:00 alarm kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 25 12:46:00 alarm kernel: usb usb5: Product: EHCI Host Controller
Dec 25 12:46:00 alarm kernel: usb usb5: Manufacturer: Linux 4.4.39-1-ARCH ehci_hcd
Dec 25 12:46:00 alarm kernel: usb usb5: SerialNumber: f1058000.usb
Dec 25 12:46:00 alarm kernel: audit: type=1327 audit(1482666360.287:4): proctitle=2F7573722F62696E2F6970367461626C65732D726573746F7265002F6574632F69707461626C65732F6970367461626C65732E72756C6573
Dec 25 12:46:00 alarm audit: PROCTITLE proctitle=2F7573722F62696E2F6970367461626C65732D726573746F7265002F6574632F69707461626C65732F6970367461626C65732E72756C6573
Dec 25 12:46:00 alarm audit: PROCTITLE proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
Dec 25 12:46:00 alarm kernel: audit: type=1327 audit(1482666360.187:3): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
Dec 25 12:46:00 alarm kernel: hub 5-0:1.0: USB hub found
Dec 25 12:46:00 alarm kernel: hub 5-0:1.0: 1 port detected
Dec 25 12:46:00 alarm kernel: nf_conntrack version 0.5.0 (15645 buckets, 62580 max)
Dec 25 12:46:00 alarm systemd[1]: Started Entropy Harvesting Daemon.
Dec 25 12:46:00 alarm systemd[1]: Started Daily man-db cache update.
Dec 25 12:46:00 alarm systemd[1]: Reached target Timers.
Dec 25 12:46:00 alarm kernel: marvell-cesa f1090000.crypto: CESA device successfully registered
Dec 25 12:46:00 alarm systemd[1]: Starting Login Service...
Dec 25 12:46:00 alarm systemd[1]: Started IPv6 Packet Filtering Framework.
Dec 25 12:46:00 alarm systemd[1]: Found device /dev/ttyS0.
Dec 25 12:46:00 alarm audit: NETFILTER_CFG table=filter family=2 entries=4
Dec 25 12:46:00 alarm audit[2578]: SYSCALL arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=1188ba0 items=0 ppid=1 pid=2578 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=
Dec 25 12:46:00 alarm audit: PROCTITLE proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
Dec 25 12:46:00 alarm kernel: audit: type=1325 audit(1482666360.607:5): table=filter family=2 entries=4
Dec 25 12:46:00 alarm systemd-logind[2628]: New seat seat0.
Dec 25 12:46:00 alarm systemd[1]: Started Login Service.
Dec 25 12:46:00 alarm audit: NETFILTER_CFG table=nat family=2 entries=0
Dec 25 12:46:00 alarm audit[2647]: SYSCALL arch=40000028 syscall=128 per=800000 success=yes exit=0 a0=b5f81008 a1=54cc a2=2aa58 a3=c2248900 items=0 ppid=6 pid=2647 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 t
Dec 25 12:46:00 alarm audit: PROCTITLE proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
Dec 25 12:46:00 alarm audit: NETFILTER_CFG table=nat family=2 entries=5
Dec 25 12:46:00 alarm audit[2578]: SYSCALL arch=40000028 syscall=294 per=800000 success=yes exit=0 a0=4 a1=0 a2=40 a3=1186ef8 items=0 ppid=1 pid=2578 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=
Dec 25 12:46:00 alarm audit: PROCTITLE proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
Dec 25 12:46:00 alarm systemd[1]: Started Packet Filtering Framework.
Dec 25 12:46:00 alarm systemd[1]: Reached target Network (Pre).
Dec 25 12:46:00 alarm systemd[1]: Starting Network Service...
Dec 25 12:46:01 alarm systemd-networkd[2665]: [/etc/systemd/network/eth2.132.netdev:8] Unknown section 'Network'. Ignoring.
Dec 25 12:46:01 alarm kernel: bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Dec 25 12:46:01 alarm systemd-networkd[2665]: br0: netdev ready
Dec 25 12:46:01 alarm systemd-networkd[2665]: Enumeration completed
Dec 25 12:46:01 alarm systemd[1]: Started Network Service.
Dec 25 12:46:01 alarm systemd[1]: Reached target Network.
Dec 25 12:46:01 alarm kernel: br0: port 1(lan1) entered blocking state
Dec 25 12:46:01 alarm kernel: br0: port 1(lan1) entered disabled state
Dec 25 12:46:01 alarm kernel: device lan1 entered promiscuous mode
Dec 25 12:46:01 alarm kernel: device eth1 entered promiscuous mode
Dec 25 12:46:01 alarm audit: ANOM_PROMISCUOUS dev=lan1 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
Dec 25 12:46:01 alarm audit: ANOM_PROMISCUOUS dev=eth1 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
Dec 25 12:46:01 alarm systemd[1]: Started OpenSSH Daemon.
Dec 25 12:46:01 alarm audit[2665]: SYSCALL arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=3 a1=80ea9690 a2=28 a3=0 items=0 ppid=1 pid=2665 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=1
Dec 25 12:46:01 alarm audit: PROCTITLE proctitle="/usr/lib/systemd/systemd-networkd"
Dec 25 12:46:01 alarm systemd[1]: Starting Permit User Sessions...
Dec 25 12:46:01 alarm kernel: br0: port 2(lan2) entered blocking state
Dec 25 12:46:01 alarm kernel: br0: port 2(lan2) entered disabled state
Dec 25 12:46:01 alarm kernel: device lan2 entered promiscuous mode
Dec 25 12:46:01 alarm audit: ANOM_PROMISCUOUS dev=lan2 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
Dec 25 12:46:01 alarm systemd[1]: Starting Network Name Resolution...
Dec 25 12:46:01 alarm audit[2665]: SYSCALL arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=3 a1=80e97fd0 a2=28 a3=0 items=0 ppid=1 pid=2665 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=1
Dec 25 12:46:01 alarm audit: PROCTITLE proctitle="/usr/lib/systemd/systemd-networkd"
Dec 25 12:46:01 alarm systemd[1]: Starting IPv4 DHCP server...
Dec 25 12:46:01 alarm kernel: br0: port 3(lan3) entered blocking state
Dec 25 12:46:01 alarm kernel: br0: port 3(lan3) entered disabled state
Dec 25 12:46:01 alarm systemd[1]: Started Permit User Sessions.
Dec 25 12:46:01 alarm audit: ANOM_PROMISCUOUS dev=lan3 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
Dec 25 12:46:01 alarm kernel: device lan3 entered promiscuous mode
Dec 25 12:46:01 alarm audit[2665]: SYSCALL arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=3 a1=80e97fd0 a2=28 a3=0 items=0 ppid=1 pid=2665 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=1
Dec 25 12:46:01 alarm audit: PROCTITLE proctitle="/usr/lib/systemd/systemd-networkd"
Dec 25 12:46:01 alarm systemd[1]: Started Getty on tty1.
Dec 25 12:46:01 alarm kernel: br0: port 4(lan4) entered blocking state
Dec 25 12:46:01 alarm kernel: br0: port 4(lan4) entered disabled state
Dec 25 12:46:01 alarm systemd[1]: Started Serial Getty on ttyS0.
Dec 25 12:46:01 alarm systemd[1]: Reached target Login Prompts.
Dec 25 12:46:01 alarm audit: ANOM_PROMISCUOUS dev=lan4 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
Dec 25 12:46:01 alarm kernel: device lan4 entered promiscuous mode
Dec 25 12:46:01 alarm sshd[2679]: Server listening on 0.0.0.0 port 222.
Dec 25 12:46:01 alarm sshd[2679]: Server listening on :: port 222.
Dec 25 12:46:01 alarm audit[2665]: SYSCALL arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=3 a1=80eabbe0 a2=28 a3=0 items=0 ppid=1 pid=2665 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=1
Dec 25 12:46:01 alarm audit: PROCTITLE proctitle="/usr/lib/systemd/systemd-networkd"
Dec 25 12:46:01 alarm kernel: br0: port 5(lan5) entered blocking state
Dec 25 12:46:01 alarm kernel: br0: port 5(lan5) entered disabled state
Dec 25 12:46:01 alarm systemd-resolved[2685]: Positive Trust Anchors:
Dec 25 12:46:01 alarm systemd-resolved[2685]: . IN DS 19036 8 2 49aac11d7b6f6446702e54a1607371607a1a41855200fd2ce1cdde32f24e8fb5
Dec 25 12:46:01 alarm systemd-resolved[2685]: Negative trust anchors: 10.in-addr.arpa 16.172.in-addr.arpa 17.172.in-addr.arpa 18.172.in-addr.arpa 19.172.in-addr.arpa 20.172.in-addr.arpa 21.172.in-addr.arpa 22.172.in-addr.arpa 23.172.in-a
Dec 25 12:46:01 alarm systemd-resolved[2685]: Using system hostname 'alarm'.
Dec 25 12:46:01 alarm audit: ANOM_PROMISCUOUS dev=lan5 prom=256 old_prom=0 auid=4294967295 uid=193 gid=193 ses=4294967295
Dec 25 12:46:01 alarm kernel: device lan5 entered promiscuous mode
Dec 25 12:46:01 alarm dhcpd[2689]: Internet Systems Consortium DHCP Server 4.3.5
Dec 25 12:46:01 alarm dhcpd[2689]: Copyright 2004-2016 Internet Systems Consortium.
Dec 25 12:46:01 alarm dhcpd[2689]: All rights reserved.
Dec 25 12:46:01 alarm dhcpd[2689]: For info, please visit https://www.isc.org/software/dhcp/
Dec 25 12:46:01 alarm dhcpd[2689]: Source compiled to use binary-leases
Dec 25 12:46:01 alarm dhcpd[2689]: Wrote 9 leases to leases file.
Dec 25 12:46:01 alarm audit[2665]: SYSCALL arch=40000028 syscall=290 per=800000 success=yes exit=40 a0=3 a1=80eabbe0 a2=28 a3=0 items=0 ppid=1 pid=2665 auid=4294967295 uid=193 gid=193 euid=193 suid=193 fsuid=193 egid=193 sgid=193 fsgid=1
Dec 25 12:46:01 alarm audit: PROCTITLE proctitle="/usr/lib/systemd/systemd-networkd"
Dec 25 12:46:01 alarm dhcpd[2689]: wlp2s0 missing an interface address
Dec 25 12:46:01 alarm systemd[1]: Started Network Name Resolution.
Dec 25 12:46:01 alarm dhcpd[2689]: Failed to get interface index: No such device
Dec 25 12:46:01 alarm dhcpd[2689]:
Dec 25 12:46:01 alarm dhcpd[2689]: If you think you have received this message due to a bug rather
Dec 25 12:46:01 alarm dhcpd[2689]: than a configuration issue please read the section on submitting
Dec 25 12:46:01 alarm dhcpd[2689]: bugs on either our web page at www.isc.org or in the README file
Dec 25 12:46:01 alarm dhcpd[2689]: before submitting a bug. These pages explain the proper
Dec 25 12:46:01 alarm dhcpd[2689]: process and the information we find helpful for debugging..
Dec 25 12:46:01 alarm dhcpd[2689]:
Dec 25 12:46:01 alarm dhcpd[2689]: exiting.
Dec 25 12:46:01 alarm kernel: 8021q: 802.1Q VLAN Support v1.8
Dec 25 12:46:01 alarm systemd-networkd[2665]: eth1: IPv6 enabled for interface: Success
Dec 25 12:46:01 alarm systemd[1]: dhcpd4.service: Control process exited, code=exited status=1
Dec 25 12:46:01 alarm systemd[1]: Failed to start IPv4 DHCP server.
Dec 25 12:46:01 alarm kernel: mvneta f1030000.ethernet eth1: configuring for fixed link mode
Dec 25 12:46:01 alarm kernel: IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Dec 25 12:46:01 alarm kernel: mvneta f1030000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Dec 25 12:46:01 alarm kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Dec 25 12:46:01 alarm systemd-networkd[2665]: eth0: IPv6 enabled for interface: Success
Dec 25 12:46:01 alarm systemd[1]: dhcpd4.service: Unit entered failed state.
Dec 25 12:46:01 alarm systemd[1]: dhcpd4.service: Failed with result 'exit-code'.
Dec 25 12:46:02 alarm kernel: mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mi:00] driver [Marvell 88E1510]
Dec 25 12:46:02 alarm kernel: mvneta f1070000.ethernet eth0: configuring for phy link mode
Dec 25 12:46:02 alarm kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec 25 12:46:02 alarm systemd-networkd[2665]: lan1: IPv6 disabled for interface: Success
Dec 25 12:46:02 alarm systemd-networkd[2665]: lan2: IPv6 disabled for interface: Success
Dec 25 12:46:02 alarm systemd-networkd[2665]: lan3: IPv6 disabled for interface: Success
Dec 25 12:46:02 alarm systemd-networkd[2665]: lan4: IPv6 disabled for interface: Success
Dec 25 12:46:02 alarm systemd-networkd[2665]: lan5: IPv6 disabled for interface: Success
Dec 25 12:46:02 alarm systemd-networkd[2665]: eth2.132: netdev ready
Dec 25 12:46:02 alarm systemd-networkd[2665]: eth2: IPv6 enabled for interface: Success
Dec 25 12:46:02 alarm kernel: mvneta f1034000.ethernet eth2: configuring for SGMII link mode
Dec 25 12:46:02 alarm kernel: mvneta f1034000.ethernet eth2: switched to 802.3z link mode
Dec 25 12:46:02 alarm kernel: IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
Dec 25 12:46:02 alarm kernel: IPv6: ADDRCONF(NETDEV_UP): eth2.132: link is not ready
Dec 25 12:46:02 alarm systemd-networkd[2665]: eth1: Gained carrier
Dec 25 12:46:02 alarm kernel: mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control rx/tx
Dec 25 12:46:02 alarm kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Dec 25 12:46:02 alarm systemd-networkd[2665]: eth2: Gained carrier
Dec 25 12:46:02 alarm systemd-networkd[2665]: eth2.132: Gained carrier
Dec 25 12:46:02 alarm kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth2.132: link becomes ready
Dec 25 12:46:02 alarm kernel: ath10k_pci 0000:02:00.0: enabling device (0140 -> 0142)
Dec 25 12:46:02 alarm kernel: ath10k_pci 0000:02:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
Dec 25 12:46:02 alarm kernel: ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
Dec 25 12:46:02 alarm kernel: ath10k_pci 0000:02:00.0: Falling back to user helper
Dec 25 12:46:03 alarm kernel: dsa dsa@0 lan3: Link is Down
Dec 25 12:46:03 alarm kernel: dsa dsa@0 lan2: Link is Down
Dec 25 12:46:03 alarm kernel: dsa dsa@0 lan1: Link is Down
Dec 25 12:46:03 alarm systemd-networkd[2665]: br0: IPv6 enabled for interface: Success
Dec 25 12:46:03 alarm kernel: IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
Dec 25 12:46:03 alarm systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Dec 25 12:46:03 alarm systemd-networkd[2665]: eth1: Gained IPv6LL
Dec 25 12:46:03 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:03 alarm systemd-networkd[2665]: eth2.132: Gained IPv6LL
Dec 25 12:46:03 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:03 alarm systemd-networkd[2665]: eth2: Gained IPv6LL
Dec 25 12:46:03 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:04 alarm kernel: dsa dsa@0 lan5: Link is Down
Dec 25 12:46:04 alarm kernel: dsa dsa@0 lan4: Link is Down
Dec 25 12:46:04 alarm haveged[2617]: haveged: ver: 1.9.1; arch: generic; vend: ; build: (gcc 4.9.2 CTV); collect: 128K
Dec 25 12:46:04 alarm haveged[2617]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 9/40; sz: 15940/69244
Dec 25 12:46:04 alarm haveged[2617]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.0018
Dec 25 12:46:04 alarm haveged[2617]: haveged: fills: 0, generated: 0
Dec 25 12:46:04 alarm kernel: dsa dsa@0 lan3: Link is Up - 100Mbps/Full - flow control off
Dec 25 12:46:04 alarm kernel: br0: port 3(lan3) entered blocking state
Dec 25 12:46:04 alarm kernel: br0: port 3(lan3) entered forwarding state
Dec 25 12:46:04 alarm systemd-networkd[2665]: lan3: Gained carrier
Dec 25 12:46:04 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:04 alarm systemd-networkd[2665]: br0: Gained carrier
Dec 25 12:46:04 alarm kernel: IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
Dec 25 12:46:04 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:05 alarm systemd-networkd[2665]: br0: Gained IPv6LL
Dec 25 12:46:07 alarm systemd-networkd[2665]: eth0: Gained carrier
Dec 25 12:46:07 alarm kernel: mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Dec 25 12:46:07 alarm kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 25 12:46:07 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:07 alarm systemd-networkd[2665]: eth2: DHCPv4 address 172.22.30.39/17 via 172.22.0.1
Dec 25 12:46:07 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:07 alarm dbus[2584]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
Dec 25 12:46:07 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:46:07 alarm systemd[1]: Starting Hostname Service...
Dec 25 12:46:07 alarm audit: NETFILTER_CFG table=filter family=10 entries=0
Dec 25 12:46:07 alarm kernel: audit_printk_skb: 72 callbacks suppressed
Dec 25 12:46:07 alarm kernel: audit: type=1325 audit(1482666367.657:13): table=filter family=10 entries=0
Dec 25 12:46:07 alarm audit: NETFILTER_CFG table=filter family=2 entries=0
Dec 25 12:46:07 alarm kernel: audit: type=1325 audit(1482666367.657:13): table=filter family=2 entries=0
Dec 25 12:46:07 alarm audit: NETFILTER_CFG table=nat family=2 entries=0
Dec 25 12:46:07 alarm kernel: audit: type=1325 audit(1482666367.657:13): table=nat family=2 entries=0
Dec 25 12:46:07 alarm audit[2724]: SYSCALL arch=40000028 syscall=337 per=800000 success=yes exit=0 a0=40000000 a1=b a2=443d900 a3=443d900 items=0 ppid=1 pid=2724 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty
Dec 25 12:46:07 alarm audit: PROCTITLE proctitle="(ostnamed)"
Dec 25 12:46:07 alarm kernel: audit: type=1300 audit(1482666367.657:13): arch=40000028 syscall=337 per=800000 success=yes exit=0 a0=40000000 a1=b a2=443d900 a3=443d900 items=0 ppid=1 pid=2724 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsu
Dec 25 12:46:07 alarm kernel: audit: type=1327 audit(1482666367.657:13): proctitle="(ostnamed)"
Dec 25 12:46:07 alarm dbus[2584]: [system] Successfully activated service 'org.freedesktop.hostname1'
Dec 25 12:46:07 alarm systemd[1]: Started Hostname Service.
Dec 25 12:46:07 alarm systemd-networkd[2665]: eth2: Could not set hostname: The name org.freedesktop.PolicyKit1 was not provided by any .service files
Dec 25 12:46:08 alarm systemd-networkd[2665]: eth0: Gained IPv6LL
Dec 25 12:46:09 alarm sshd[2731]: Connection closed by 192.168.0.2 port 47226 [preauth]
Dec 25 12:46:16 alarm sshd[2737]: Accepted password for alarm from 192.168.0.2 port 47228 ssh2
Dec 25 12:46:16 alarm kernel: audit: type=1006 audit(1482666376.417:14): pid=2737 uid=0 subj=kernel old-auid=4294967295 auid=1000 old-ses=4294967295 ses=1 res=1
Dec 25 12:46:16 alarm sshd[2737]: pam_unix(sshd:session): session opened for user alarm by (uid=0)
Dec 25 12:46:16 alarm systemd[1]: Created slice User Slice of alarm.
Dec 25 12:46:16 alarm systemd[1]: Starting User Manager for UID 1000...
Dec 25 12:46:16 alarm systemd-logind[2628]: New session 1 of user alarm.
Dec 25 12:46:16 alarm systemd[1]: Started Session 1 of user alarm.
Dec 25 12:46:16 alarm kernel: audit: type=1006 audit(1482666376.527:15): pid=2739 uid=0 subj=kernel old-auid=4294967295 auid=1000 old-ses=4294967295 ses=2 res=1
Dec 25 12:46:16 alarm systemd[2739]: pam_unix(systemd-user:session): session opened for user alarm by (uid=0)
Dec 25 12:46:16 alarm systemd[2739]: Reached target Paths.
Dec 25 12:46:17 alarm systemd[2739]: Starting D-Bus User Message Bus Socket.
Dec 25 12:46:17 alarm systemd[2739]: Reached target Timers.
Dec 25 12:46:17 alarm systemd[2739]: Listening on D-Bus User Message Bus Socket.
Dec 25 12:46:17 alarm systemd[2739]: Reached target Sockets.
Dec 25 12:46:17 alarm systemd[2739]: Reached target Basic System.
Dec 25 12:46:17 alarm systemd[2739]: Reached target Default.
Dec 25 12:46:17 alarm systemd[2739]: Startup finished in 548ms.
Dec 25 12:46:17 alarm systemd[1]: Started User Manager for UID 1000.
Dec 25 12:46:19 alarm su[2754]: (to root) alarm on pts/0
Dec 25 12:46:19 alarm su[2754]: pam_unix(su:session): session opened for user root by alarm(uid=1000)
Dec 25 12:46:21 alarm kernel: random: nonblocking pool is initialized
Dec 25 12:46:37 alarm systemd-resolved[2685]: Switching to DNS server 172.28.224.11 for interface eth2.
Dec 25 12:46:37 alarm systemd-resolved[2685]: Switching to DNS server 8.8.8.8 for interface br0.
Dec 25 12:46:41 alarm systemd-resolved[2685]: Using degraded feature set (UDP+EDNS0+DO) for DNS server 8.8.8.8.
Dec 25 12:46:41 alarm systemd-resolved[2685]: Using degraded feature set (UDP+EDNS0+DO) for DNS server 172.28.224.11.
Dec 25 12:46:56 alarm systemd-resolved[2685]: Using degraded feature set (UDP+EDNS0) for DNS server 8.8.8.8.
Dec 25 12:46:56 alarm systemd-resolved[2685]: Using degraded feature set (UDP+EDNS0) for DNS server 172.28.224.11.
Dec 25 12:47:02 alarm kernel: ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Dec 25 12:47:02 alarm kernel: ath10k_pci 0000:02:00.0: Falling back to user helper
Dec 25 12:47:13 alarm systemd-resolved[2685]: Using degraded feature set (UDP) for DNS server 8.8.8.8.
Dec 25 12:47:13 alarm systemd-resolved[2685]: Using degraded feature set (UDP) for DNS server 172.28.224.11.
Dec 25 12:47:27 alarm systemd[1]: sys-subsystem-net-devices-wlp2s0.device: Job sys-subsystem-net-devices-wlp2s0.device/start timed out.
Dec 25 12:47:27 alarm systemd[1]: Timed out waiting for device sys-subsystem-net-devices-wlp2s0.device.
Dec 25 12:47:27 alarm systemd[1]: Dependency failed for Hostapd IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator.
Dec 25 12:47:27 alarm systemd[1]: hostapd.service: Job hostapd.service/start failed with result 'dependency'.
Dec 25 12:47:27 alarm systemd[1]: sys-subsystem-net-devices-wlp2s0.device: Job sys-subsystem-net-devices-wlp2s0.device/start failed with result 'timeout'.
Dec 25 12:47:27 alarm systemd[1]: Reached target Multi-User System.
Dec 25 12:47:27 alarm systemd[1]: Reached target Graphical Interface.
Dec 25 12:47:27 alarm systemd[1]: Startup finished in 3.601s (kernel) + 1min 31.012s (userspace) = 1min 34.613s.
Dec 25 12:47:28 alarm systemd-resolved[2685]: Using degraded feature set (TCP) for DNS server 8.8.8.8.
Dec 25 12:47:28 alarm systemd-resolved[2685]: Using degraded feature set (TCP) for DNS server 172.28.224.11.
Dec 25 12:47:48 alarm systemd-resolved[2685]: Using degraded feature set (UDP) for DNS server 8.8.8.8.
Dec 25 12:47:48 alarm systemd-resolved[2685]: Using degraded feature set (UDP) for DNS server 172.28.224.11.
Dec 25 12:47:50 alarm dhcpcd[2781]: DUID 00:01:00:01:1f:c1:df:85:00:50:43:00:2a:1d
Dec 25 12:47:50 alarm dhcpcd[2781]: eth2.132: IAID 43:21:40:03
Dec 25 12:47:50 alarm dhcpcd[2781]: eth2.132: soliciting an IPv6 router
Dec 25 12:47:50 alarm dhcpcd[2781]: eth2.132: ipv6nd_sendrsprobe: sendmsg: Operation not permitted
Dec 25 12:47:51 alarm dhcpcd[2781]: eth2.132: rebinding lease of 83.xxx.7.127
Dec 25 12:47:55 alarm dhcpcd[2781]: eth2.132: probing address 83.xxx.7.127/24
Dec 25 12:48:01 alarm dhcpcd[2781]: eth2.132: leased 83.xxx.7.127 for 7200 seconds
Dec 25 12:48:01 alarm dhcpcd[2781]: eth2.132: adding route to 83.xxx.7.0/24
Dec 25 12:48:01 alarm dhcpcd[2781]: eth2.132: adding default route via 83.xxx.7.1
Dec 25 12:48:01 alarm dhcpcd[2781]: forked to background, child pid 2790
Dec 25 12:48:03 alarm kernel: ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff sub 0000:0000) fw 10.2.4.70.54 fwapi 5 bdapi 1 htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 features no-p2p,raw-mode
Dec 25 12:48:03 alarm kernel: ath10k_pci 0000:02:00.0: debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
Dec 25 12:48:04 alarm kernel: ath: EEPROM regdomain: 0x0
Dec 25 12:48:04 alarm kernel: ath: EEPROM indicates default country code should be used
Dec 25 12:48:04 alarm kernel: ath: doing EEPROM country->regdmn map search
Dec 25 12:48:04 alarm kernel: ath: country maps to regdmn code: 0x3a
Dec 25 12:48:04 alarm kernel: ath: Country alpha2 being used: US
Dec 25 12:48:04 alarm kernel: ath: Regpair used: 0x3a
Dec 25 12:48:04 alarm systemd[1]: Starting Load/Save RF Kill Switch Status...
Dec 25 12:48:04 alarm kernel: ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
Dec 25 12:48:04 alarm systemd-resolved[2685]: Using degraded feature set (TCP) for DNS server 172.28.224.11.
Dec 25 12:48:04 alarm systemd-resolved[2685]: Using degraded feature set (TCP) for DNS server 8.8.8.8.
Dec 25 12:48:04 alarm systemd-networkd[2665]: wlan0: Renamed to wlp2s0
Dec 25 12:48:04 alarm systemd-networkd[2665]: wlp2s0: IPv6 enabled for interface: Success
Dec 25 12:51:33 alarm systemd-timesyncd[1784]: Synchronized to time server 77.245.18.26:123 (0.arch.pool.ntp.org).
Dec 25 12:51:33 alarm systemd[2739]: Time has been changed
Dec 25 12:51:33 alarm systemd[1]: Started Load/Save RF Kill Switch Status.
Dec 25 12:51:33 alarm systemd[1]: Time has been changed
Dec 25 12:51:34 alarm kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Dec 25 12:51:34 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:51:34 alarm systemd-timesyncd[1784]: Synchronized to time server 77.245.18.26:123 (0.arch.pool.ntp.org).
Dec 25 12:51:34 alarm systemd-timesyncd[1784]: Network configuration changed, trying to establish connection.
Dec 25 12:51:34 alarm systemd-timesyncd[1784]: Synchronized to time server 77.245.18.26:123 (0.arch.pool.ntp.org).
Dec 25 12:51:51 alarm systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 2833 (sysctl)
Dec 25 12:51:51 alarm systemd[1]: Mounting Arbitrary Executable File Formats File System...
Dec 25 12:51:51 alarm systemd[1]: Mounted Arbitrary Executable File Formats File System.
Dec 25 12:51:52 alarm kernel: nr_pdflush_threads exported in /proc is scheduled for removal
')
I dont get dhcpd working with the wifi device.
This is the dhcpd.conf:
$this->bbcode_second_pass_code('', '
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;
option domain-name-servers 77.109.148.137, 77.109.148.136;
default-lease-time 600;
max-lease-time 7200;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
subnet 10.152.187.0 netmask 255.255.255.0 {
}
# This is a very basic subnet declaration.
subnet 192.168.5.0 netmask 255.255.255.0 {
interface br0;
range 192.168.5.10 192.168.5.30;
option routers 192.168.5.1;
option domain-name-servers 77.109.148.137, 77.109.148.136;
}
subnet 192.168.7.0 netmask 255.255.255.0 {
interface wlp2s0;
range 192.168.7.10 192.168.7.250;
option routers 192.168.5.1;
option domain-name-servers 77.109.148.137, 77.109.148.136;
}
subnet 192.168.2.0 netmask 255.255.255.0 {
}
subnet 192.168.1.0 netmask 255.255.255.0 {
}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
')
Another annoying thing is, i dont get a dhcp lease on eth2.132 (thats the vlan i use to connect to the internet).
When i login and type: dhcpcd eth2.132 - i get one:
$this->bbcode_second_pass_code('', '
[root@alarm alarm]# dhcpcd eth2.132
DUID 00:01:00:01:1f:c1:df:85:00:50:43:00:2a:1d
eth2.132: IAID 43:21:40:03
eth2.132: rebinding lease of 83.xx.7.127
eth2.132: soliciting an IPv6 router
eth2.132: ipv6nd_sendrsprobe: sendmsg: Operation not permitted
eth2.132: probing address 83.xx.7.127/24
eth2.132: leased 83.xx.7.127 for 7200 seconds
eth2.132: adding route to 83.xx.7.0/24
eth2.132: adding default route via 83.xx.7.1
forked to background, child pid 2875
')
What i just noticed during writing all this is:
$this->bbcode_second_pass_code('', '
Dec 25 12:48:04 alarm kernel: ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
')
Maybe thats the problem...
btw: is it you oleg?

if so, its me, oli - the guy with the ath10k problem
