[root@alarm network]# ls
10-eth0.network 30-eth2.132.netdev 50-br0.netdev 70-lan.network 90-wlan.link
20-eth1.network 40-eth2.network 60-br0.network 80-eth2.132.network 91-wlan.network
[root@alarm network]# cat 90-wlan.link
[Match]
Type=wlan
[Network]
Address=192.168.7.1
[Link]
Name=wlp2s0
[root@alarm network]# cat 91-wlan.network
[Match]
Name=w*
[Network]
Address=192.168.7.1
[root@alarm network]# pwd
/etc/systemd/network
[ 28.419509] random: nonblocking pool is initialized
[ 69.882057] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 69.892543] ath10k_pci 0000:02:00.0: Falling back to user helper
[ 131.042879] ath10k_pci 0000:02:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff sub 0000:0000) fw 10.2.4.70.54 fwapi 5 bdapi 1 htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 features no-p2p,raw-mode
[ 131.061949] ath10k_pci 0000:02:00.0: debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
[ 131.151399] ath: EEPROM regdomain: 0x0
[ 131.151410] ath: EEPROM indicates default country code should be used
[ 131.151415] ath: doing EEPROM country->regdmn map search
[ 131.151420] ath: country maps to regdmn code: 0x3a
[ 131.151425] ath: Country alpha2 being used: US
[ 131.151429] ath: Regpair used: 0x3a
[ 131.250305] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
60(!!) seconds from boot to bring up the wlp2s0. Unfortunately i will never have a dhcpd running on that device, as it simply timeouts. Is there something known?