Losing internet after update :(

[1bn3mar]

So I'm trying to update and install some package's on archlinux arm on utm,

but whenever i install anything with pacman the network configuration absolutely demolishes,
note that i tried various network fix's but nothing work's i probably did the installation 5 to 10,
so what i did was this:

1: got the ready install from here: https://mac.getutm.app/gallery/archlinux-arm.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2: then checked the network configuration like this:

[USER@DEVICE ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

2: enp0s5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether da:36:3c:aa:ca:18 brd ff:ff:ff:ff:ff:ff

[USER@DEVICE ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever

2: enp0s5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether da:36:3c:aa:ca:18 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic enp0s5
valid_lft 86303sec preferred_lft 86303sec
inet6 fec0::d836:3cff:feaa:ca18/64 scope site dynamic mngtmpaddr noprefixroute
valid_lft 86305sec preferred_lft 14305sec
inet6 fe80::d836:3cff:feaa:ca18/64 scope link
valid_lft forever preferred_lft forever
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3: and then i usually run this:

[USER@DEVICE ~]# pacman-key --init
gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
gpg: no ultimately trusted keys found
gpg: starting migration from earlier GnuPG versions
gpg: porting secret keys from '/etc/pacman.d/gnupg/secring.gpg' to gpg-agent
gpg: migration succeeded
gpg: Generating pacman keyring master key...
gpg: key 20572070392D64C0 marked as ultimately trusted
gpg: directory '/etc/pacman.d/gnupg/openpgp-revocs.d' created
gpg: revocation certificate stored as '/etc/pacman.d/gnupg/openpgp-revocs.d/8B25DE1DA859913E38C7C1F720572070392D64C0.rev'
gpg: Done
==> Updating trust database...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u

[USER@DEVICE ~]# pacman-key --populate
==> Appending keys from archlinuxarm.gpg...
==> Locally signing trusted keys in keyring...
-> Locally signing key 69DD6C8FD314223E14362848BF7EEF7A9C6B5765...
-> Locally signing key 02922214DE8981D14DC2ACABBC704E86B823CD25...
-> Locally signing key 9D22B7BB678DC056B1F7723CB55C5315DCD9EE1A...
==> Importing owner trust values...
gpg: setting ownertrust to 4
gpg: inserting ownertrust of 4
gpg: setting ownertrust to 4
==> Updating trust database...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 3 trust: 0-, 0q, 0n, 0m, 0f, 1u
gpg: depth: 1 valid: 3 signed: 1 trust: 0-, 0q, 0n, 3m, 0f, 0u
gpg: depth: 2 valid: 1 signed: 0 trust: 1-, 0q, 0n, 0m, 0f, 0u

[USER@DEVICE ~]# pacman -Sy archlinux-keyring
:: Synchronizing package databases...
core is up to date
extra 2.3 MiB 168 KiB/s 00:14 [######################] 100%
community 5.7 MiB 273 KiB/s 00:21 [######################] 100%
alarm is up to date
aur 8.9 KiB 0.00 B/s 00:00 [######################] 100%
resolving dependencies...
looking for conflicting packages...

Packages (1) archlinux-keyring-20220125-1

Total Download Size: 1.02 MiB
Total Installed Size: 1.43 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
archlinux-keyrin... 1046.3 KiB 79.3 KiB/s 00:13 [######################] 100%
(1/1) checking keys in keyring [######################] 100%
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) checking available disk space [######################] 100%
:: Processing package changes...
(1/1) installing archlinux-keyring [######################] 100%
==> Appending keys from archlinux.gpg...
==> Locally signing trusted keys in keyring...
-> Locally signing key D8AFDDA07A5B6EDFA7D8CCDAD6D055F927843F1C...
-> Locally signing key 2AC0A42EFB0B5CBC7A0402ED4DC95B6D7BE9892E...
-> Locally signing key 91FFE0700E80619CEB73235CA88E23E377514E00...
-> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
-> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
==> Importing owner trust values...
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: setting ownertrust to 4
gpg: inserting ownertrust of 4
gpg: setting ownertrust to 4
==> Disabling revoked keys in keyring...
-> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
-> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
-> Disabling key 50F33E2E5B0C3D900424ABE89BDCF497A4BBCC7F...
-> Disabling key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
-> Disabling key 779CD2942629B7FA04AB8F172E89012331361F01...
-> Disabling key 39F880E50E49A4D11341E8F939E4F17F295AFBF4...
-> Disabling key 8840BD07FC24CB7CE394A07CCF7037A4F27FB7DA...
-> Disabling key 5559BC1A32B8F76B3FCCD9555FA5E5544F010D48...
-> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
-> Disabling key 07DFD3A0BC213FA12EDC217559B3122E2FA915EC...
-> Disabling key DBE7D3DD8C81D58D0A13D0E76BC26A17B9B7018A...
-> Disabling key 4FCF887689C41B09506BE8D5F3E1D5C5D30DB0AD...
-> Disabling key 5A2257D19FF7E1E0E415968CE62F853100F0D0F0...
-> Disabling key D921CABED130A5690EF1896E81AF739EC0711BF1...
-> Disabling key F3691687D867B81B51CE07D9BBE43771487328A9...
-> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
-> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
-> Disabling key DDB867B92AA789C165EEFA799B729B06A680C281...
-> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
-> Disabling key 717026A9D4779FC53940726640F557B731496106...
-> Disabling key 5696C003B0854206450C8E5BE613C09CB4440678...
-> Disabling key 684148BB25B49E986A4944C55184252D824B18E8...
-> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
-> Disabling key 8CF934E339CAD8ABF342E822E711306E3C4F88BC...
-> Disabling key 5E7585ADFF106BFFBBA319DC654B877A0864983E...
-> Disabling key BFA1ECFEF1524EE4099CDE971F0CD4921ECAA030...
-> Disabling key 65EEFE022108E2B708CBFCF7F9E712E59AF5F22A...
-> Disabling key 40440DC037C05620984379A6761FAD69BA06C6A9...
-> Disabling key 34C5D94FE7E7913E86DC427E7FB1A3800C84C0A5...
-> Disabling key 1A60DC44245D06FEF90623D6EEEEE2EEEE2EEEEE...
-> Disabling key A5CA9D5515DC2CA73DF748CA5C2E46A0F53A76ED...
-> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
-> Disabling key CC5967D4095B4F3B42D45FA081A402D4F382BBBD...
-> Disabling key 91BD8815FE0040FA7FF5D68754C28F4FF5A1A949...
-> Disabling key A84B8DC73AB832067BE54C3C976AC6FA3B94FA10...
-> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
-> Disabling key 5357F3B111688D88C1D88119FCF2CB179205AC90...
-> Disabling key 4D913AECD81726D9A6C74F0ADA6426DD215B37AD...
-> Disabling key FB871F0131FEA4FB5A9192B4C8880A6406361833...
-> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
-> Disabling key 487EACC08557AD082088DABA1EB2638FF56C0C53...
-> Disabling key B1F2C889CB2CCB2ADA36D963097D629E437520BD...
-> Disabling key 9515D8A8EAB88E49BB65EDBCE6B456CAF15447D5...
-> Disabling key F648622B1715468FD654F45CB7310AE5F04569AE...
-> Disabling key 76B4192E902C0A52642C63C273B8ED52F1D357C1...
-> Disabling key 2612B04099DBD9B9A3DD92A0456C7A9B91B842AE...
-> Disabling key 40776A5221EF5AD468A4906D42A1DB15EC133BAD...
-> Disabling key D4DE5ABDE2A7287644EAC7E36D1A9E70E19DAA50...
-> Disabling key 44D4A033AC140143927397D47EFD567D4C7EA887...
==> Updating trust database...
gpg: marginals needed: 3 completes needed: 1 trust model: pgp
gpg: depth: 0 valid: 1 signed: 8 trust: 0-, 0q, 0n, 0m, 0f, 1u
gpg: depth: 1 valid: 8 signed: 95 trust: 0-, 0q, 0n, 8m, 0f, 0u
gpg: depth: 2 valid: 88 signed: 33 trust: 88-, 0q, 0n, 0m, 0f, 0u
gpg: next trustdb check due at 2022-05-06
==> Updating trust database...
gpg: next trustdb check due at 2022-05-06
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
note: until now even after rebooting everything is normal.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4: now i update the system by running this:

[USER@DEVICE ~]# ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[USER@DEVICE ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
[USER@DEVICE ~]# ping 1.1.1.1
ping: connect: Network is unreachable
[USER@DEVICE ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
[USER@DEVICE ~]#
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
So there's my problem i just need to run arch but everything i tried failed,
any help would be appreciated,
thanks in advanced ^_^