lspci show nothing

This forum is for discussion about general software issues.

lspci show nothing

Postby tomcheng76 » Fri Aug 16, 2013 1:41 am

Hi,
This is the output
$this->bbcode_second_pass_code('', '[root@alarm ~]# lspci -vvv
[root@alarm ~]# uname -a
Linux alarm 3.1.10-22-ARCH #1 PREEMPT Fri Jun 28 21:43:02 CDT 2013 armv5tel GNU/Linux
[root@alarm ~]# pacman -Ss pciutils
core/pciutils 3.2.0-3 (base) [installed]
PCI bus configuration space access library and tools')

goflex net

If i remembered correctly, it works before :o

Edited: /proc/bus/pci/devices is empty
tomcheng76
 
Posts: 130
Joined: Mon Dec 13, 2010 11:24 am

Re: lspci show nothing

Postby moonman » Fri Aug 16, 2013 5:41 am

Are there any PCI devices in GF? Maybe you confused it with lshw ?
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: lspci show nothing

Postby tomcheng76 » Fri Aug 16, 2013 6:13 am

If i remembered correctly, it at least show the Ethernet Adapter, now shows nothing.
[root@alarm ~]# lsusb
Bus 001 Device 002: ID 0bc2:3312 Seagate RSS LLC
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

For lshw, it shows command not found and i cannot found it in pacman
tomcheng76
 
Posts: 130
Joined: Mon Dec 13, 2010 11:24 am

Re: lspci show nothing

Postby moonman » Fri Aug 16, 2013 6:34 am

You are right lshw is not in repo anymore for some reason, but i had it installed from before. If i remember correctly though, lspci never showed anything thats why i installed lshw
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: lspci show nothing

Postby tomcheng76 » Fri Aug 16, 2013 9:26 am

thanks moonman, if your lshw works, i may wait for the lshw fix
tomcheng76
 
Posts: 130
Joined: Mon Dec 13, 2010 11:24 am


Return to General

Who is online

Users browsing this forum: No registered users and 7 guests