[Solved] Problem on installation in a TonidoPlug 2

[kazebayashi]

Hi,

Trying to install ARMv5 on my TonidoPlug 2, I did all the steps described here: http://archlinuxarm.org/platforms/armv5/tonidoplug-2
Everything went fine unitl step 11, when rebooting into Arch Linux ARM.
Puty get stucked and nothing happened.
Now I cannot access the plug via ssh anymore.

Does anyone could help me?
Thanks

[WarheadsSE]

What are you using to connect to the TP2? Hostname? IP address?

[kazebayashi]

I'm using IP address (like this: 192.168.1.xx), port 22 in PuTTy.

[WarheadsSE]

It may have changed. Check your router's DHCP table. The hostname is 'alarm'

[kazebayashi]

(Thanks for your help WarheadsSE)

I checked the router: I can't see it.
The router shows that there is something plugged on the "LAN2" ethernet port, but I can't see it on the "connected devices" list.

I tried to connect via puTTy with "alarm" as hostname and port 22, but nothing: "Unable to open connection to alarm. Host does not exist".

Did I brick the TD?

[kazebayashi]

I founded 2 interesting threads concerning this situation:
http://www.tonido.com/forum/viewtopic.p ... &view=next
http://www.tonido.com/forum/viewtopic.php?f=32&t=5022

I'll buy a serial cable and try to do it...

Ok,

I bought this cable:
http://www.amazon.fr/gp/product/B00CEVIAWI/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
$this->bbcode_second_pass_quote('', 'C')able USB TTL 5V connecteur (chipset FTDI - compatible Arduino)
USBTTL5VC1.8M

[WarheadsSE]

You actually should not be attaching Vcc.

Also, if you are now running ALARM, check that the machine was detected correctly with those two values changed.