[KERNEL] Kirkwood kernel 3.11 for testing. No aufs.

This forum is for topics dealing with problems with software specifically in the ARMv5 repo.

Re: [KERNEL] Kirkwood kernel 3.11 for testing. No aufs.

Postby wiley » Sat Sep 14, 2013 7:27 pm

All LEDs work and are properly labeled.

Here's the full patch:
https://skydrive.live.com/download?resi ... RcboXdFxRA

Here's the meta-patch to get you from the file you posted to my patch:
https://skydrive.live.com/download?resi ... ZQrOK9kH_k

Also, could you enable CONFIG_LEDS_TRIGGER_CPU? I've found it quite useful in the past.
wiley
 
Posts: 11
Joined: Wed Jan 11, 2012 6:11 pm
Location: Austin, TX

Re: [KERNEL] Kirkwood kernel 3.11 for testing. No aufs.

Postby moonman » Sun Sep 15, 2013 3:13 am

Thanks for the fixes. How is CPU trigger useful?

$this->bbcode_second_pass_code('', ' │ This allows LEDs to be controlled by active CPUs. This shows
│ the active CPUs across an array of LEDs so you can see which
│ CPUs are active on the system at any given moment.')

My understanding is that this shows which CPU is active on a multi-CPU system.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Re: [KERNEL] Kirkwood kernel 3.11 for testing. No aufs.

Postby wiley » Sun Sep 15, 2013 3:18 am

The option adds a trigger for each CPU. On a single CPU system, that means you can set an LED to be triggered by cpu0 and get a usage monitor. In particular, it lets you see if your plug is getting CPU bound on some task. Or the opposite - I've used it to see when my kernel build finishes :D .
wiley
 
Posts: 11
Joined: Wed Jan 11, 2012 6:11 pm
Location: Austin, TX

Re: [KERNEL] Kirkwood kernel 3.11 for testing. No aufs.

Postby moonman » Sun Sep 15, 2013 3:20 am

Sounds good, I will include it. Now just waiting for aufs to be released for 3.11
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3387
Joined: Sat Jan 15, 2011 3:36 am

Previous

Return to ARMv5

Who is online

Users browsing this forum: No registered users and 4 guests