Hi,
My Archlinux ARM install on GoFlex Home stopped working some while ago and I'm now girding my loins to fix it, having taken off its drive contents as a precaution.
I was intendning getting it back to "shipping" condition, but the process described at the Seagate we page didn't work. (The USB drive was activated, but the process didn't complete.)
I attempted to Netconsole listen in to the U-Boot, but although I can ping the 10.10.10.6 NIC, I see nothing on the 10.10.10.4/5 addresses.
$this->bbcode_second_pass_code('', 'brian@brian-Virtual-Machine:~$ nc -luk 10.10.10.4 6666
^C
brian@brian-Virtual-Machine:~$ sudo nc -luk 10.10.10.5 6666
[sudo] password for brian:
^Cbrian@brian-Virtual-Machine:~$ ping 10.10.10.6
PING 10.10.10.6 (10.10.10.6) 56(84) bytes of data.
64 bytes from 10.10.10.6: icmp_seq=1 ttl=64 time=0.031 ms
64 bytes from 10.10.10.6: icmp_seq=2 ttl=64 time=0.038 ms
64 bytes from 10.10.10.6: icmp_seq=3 ttl=64 time=0.065 ms
^C
--- 10.10.10.6 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.031/0.044/0.065/0.016 ms
brian@brian-Virtual-Machine:~$
')
Any ideas please?
Thanks
Brian