Goflex home problem

This forum is for topics dealing with problems with software specifically in the ARMv5 repo.

Goflex home problem

Postby pocket » Wed Jul 22, 2015 1:15 pm

Hello

I have a problem with my goflex home.

i try to install archlinux like in the forum instrutions bur after the reboot i only have led green blinking , so i have made the steps in this thread

viewtopic.php?f=18&t=3312&p=19207#p19207

wen i turn on the goflex with that usb (without hdd)the led green blink and then fixed but i dont have ethernet only the orange light is on.

any one can help me

Regards
pocket
 
Posts: 14
Joined: Mon Dec 23, 2013 10:35 am
Location: Portugal

Re: Goflex home problem

Postby moonman » Thu Jul 23, 2015 3:23 am

Wjat size is the hard drive?
Are you booting off of a harddrive or usb?
When was the first install date/what is the uboot version?

Orange light means uboot did not find kernel on any of the storage devices.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3388
Joined: Sat Jan 15, 2011 3:36 am

Re: Goflex home problem

Postby pocket » Thu Jul 23, 2015 8:57 am

hello moonman and tanks for your reply

1º hard drive clean 80gb but unpluged

2º booting from usb with 4gb i try with 2 /16 /32 gb all the same probleam

3º the date i try was 19/07/2015 the uboot version i dont now

my hdd is clean i dont have any date because wen i try this the hdd was unplugued
pocket
 
Posts: 14
Joined: Mon Dec 23, 2013 10:35 am
Location: Portugal

Re: Goflex home problem

Postby pocket » Fri Jul 24, 2015 8:41 am

Any one can help, i have try a lot of things but no sucess i have a led green fixed but no internet to make a new instalation do i need to make any change in usb??

regards
pocket
 
Posts: 14
Joined: Mon Dec 23, 2013 10:35 am
Location: Portugal

Re: Goflex home problem

Postby moonman » Fri Jul 24, 2015 9:39 am

Is green led blinking or solid green?

If solid green you should check for IP address in your router and ssh into it. IP might have changed since last time.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3388
Joined: Sat Jan 15, 2011 3:36 am

Re: Goflex home problem

Postby pocket » Fri Jul 24, 2015 12:04 pm

i have solid green led but i dont see any ip, i only have solid green led because i boot from a usb i made with this steps

$this->bbcode_second_pass_quote('', 's')udo su
cd /media/rootfs
wget http://archlinuxarm.org/os/ArchLinuxARM ... est.tar.gz
tar xvzf ArchLinuxARM-kirkwood-latest.tar.gz
sync #may take a while
cd /
umount /media/rootfs


in my router dont apears any ip
pocket
 
Posts: 14
Joined: Mon Dec 23, 2013 10:35 am
Location: Portugal

Re: Goflex home problem

Postby Socaltom » Fri Jul 24, 2015 4:30 pm

Have you tried booting with USB only ( no HD installed?)
Tom
used to be owned by me
Pink Pogo V2, Black Pogo V3, Zyxel NAS 325 v1,
used to be Adminstrator for
Goflex net, Black V3, Black V2
Now I have a couple of raspberry pi ( 3+ and 4)
Socaltom
 
Posts: 571
Joined: Thu Apr 07, 2011 2:21 pm
Location: The left side

Re: Goflex home problem

Postby pocket » Fri Jul 24, 2015 10:54 pm

Hi socaltom is that The method im doing without HDD only from usb
pocket
 
Posts: 14
Joined: Mon Dec 23, 2013 10:35 am
Location: Portugal

Re: Goflex home problem

Postby pocket » Sat Jul 25, 2015 12:43 am

Finally i have connection now wen i try to connect ssh give this error

ssh: connect to host 192.168.1.5 port 22: No route to host
what i need to do

regards
pocket
 
Posts: 14
Joined: Mon Dec 23, 2013 10:35 am
Location: Portugal

Re: Goflex home problem

Postby moonman » Sat Jul 25, 2015 4:33 am

That is not a connection, it can't find anything on that IP address.
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4
-----------------------------------------------------------------------------------------------------------------------
[armv5] Updated U-Boot | [armv5] NAND Rescue System
moonman
Developer
 
Posts: 3388
Joined: Sat Jan 15, 2011 3:36 am

Next

Return to ARMv5

Who is online

Users browsing this forum: No registered users and 3 guests