Looks like BFQ bug. Edit/create uEnv.txt with the following line added: $this->bbcode_second_pass_code('', 'optargs=elevator=cfq') It should get you booting for now, next release will have this fixed
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4 ----------------------------------------------------------------------------------------------------------------------- [armv5] Updated U-Boot | [armv5] NAND Rescue System
If you can't boot now, then if you have a rescue system installed, just boot into that, then: $this->bbcode_second_pass_code('', 'mount /dev/sda1 /mnt # Assuming sda1 is your rootfs partition arch-chroot /mnt /usr/bin/bash pacman -Suy exit sync reboot')
If you have no rescue system, then you will have to use any linux machine. Create or edit uEnv.txt under /boot on the rootfs partition with the following contents: $this->bbcode_second_pass_code('', 'optargs=elevator=cfq') Then boot your arm device, run full update with pacman -Syu and remove changes to uEnv.txt
Pogoplug V4 | GoFlex Home | Raspberry Pi 4 4GB | CuBox-i4 Pro | ClearFog | BeagleBone Black | Odroid U2 | Odroid C1 | Odroid XU4 ----------------------------------------------------------------------------------------------------------------------- [armv5] Updated U-Boot | [armv5] NAND Rescue System
My GFH died after linux-firmware update. Now no led blinking only ethernet led. i m only hearing hdd spin sound. no ssh, no taking ip from router.. do you think is it dead?
I updated yesterday evening and network connection is not worked.i tried reboot and isn't worked.after i powered off. Today nothing opening. no leds no ip but hdd spin starting. How do I make it work?