Configuring Plymouth

This forum is for topics dealing with problems with software specifically in the ARMv6h repo.

Configuring Plymouth

Postby CD1 » Fri Jul 07, 2017 2:33 am

I am trying to get plymouth working on a Raspberry Pi. I have built the package from the AUR, added the plymouth hook in /etc/mkinicpio.conf as per https://wiki.archlinux.org/index.php/Plymouth, and I can generate a working initramfs with sudo plymouth-set-default-theme -R <theme>

It all looks like its working, plymouth loads on boot, however it doesn't display the desired theme, it simply gives a grey screen with 3 dots. It doesn't matter which theme I try to set I just get the grey screen with the dots every time.

There are a few suspicious lines in the log, but I'm not really sure what im looking for. It tries several different themes and says 'no such file xxx' several times, but I can browse to the folder and that file is there.

[ply-key-file.c:83] ply_key_file_open_file:Failed to open key file /usr/share/plymouth/themes/spinner/spinner.plymouth: No such file or directory
[ply-boot-splash.c:406] ply_boot_splash_free:freeing splash
[ply-boot-splash.c:385] detach_from_seats:detaching from seats


plymouth-debug.log is below:
Code: Select all
[main.c:1848]                                 check_logging:checking if console messages should be redirected and logged
[main.c:1857]                                 check_logging:logging will be enabled!
[main.c:1929]                        initialize_environment:source built on Jul  6 2017
[main.c:1939]                        initialize_environment:Making sure /var/run/plymouth exists
[ply-utils.c:689]                          ply_create_directory:directory '/var/run/plymouth' already exists
[main.c:1943]                        initialize_environment:initialized minimal work environment
[main.c:1664]                     attach_to_running_session:creating new terminal session
[ply-terminal-session.c:362]                   ply_terminal_session_attach:ptmx not passed in, creating one
[ply-terminal-session.c:236]                           open_pseudoterminal:opening device '/dev/ptmx'
[ply-terminal-session.c:242]                           open_pseudoterminal: opened device '/dev/ptmx'
[ply-terminal-session.c:244]                           open_pseudoterminal:creating pseudoterminal
[ply-terminal-session.c:252]                           open_pseudoterminal:done creating pseudoterminal
[ply-terminal-session.c:254]                           open_pseudoterminal:unlocking pseudoterminal
[ply-terminal-session.c:261]                           open_pseudoterminal:unlocked pseudoterminal
[ply-terminal-session.c:372]                   ply_terminal_session_attach:redirecting system console to terminal device
[ply-terminal-session.c:381]                   ply_terminal_session_attach:done redirecting system console to terminal device
[ply-terminal-session.c:511]            ply_terminal_session_start_logging:logging incoming console messages
[main.c:694]                       get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
could not write pid file /run/plymouth/pid: No such file or directory
[main.c:300]                                 load_settings:Trying to load /etc/plymouth//plymouthd.conf
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group Daemon
[ply-key-file.c:259]                      ply_key_file_load_groups:key file has no more groups
[ply-key-file.c:352]                        ply_key_file_get_value:key file does not have entry for key 'ShowDelay'
[main.c:432]                    find_system_default_splash:System configured theme file is '/usr/share/plymouth/themes/pix/pix.plymouth'
[main.c:300]                                 load_settings:Trying to load /usr/share/plymouth//plymouthd.defaults
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group Daemon
[ply-key-file.c:259]                      ply_key_file_load_groups:key file has no more groups
[main.c:320]                                 load_settings:Splash delay is set to 5.000000
[main.c:446]              find_distribution_default_splash:Distribution default theme file is '/usr/share/plymouth/themes/spinner/spinner.plymouth'
[main.c:850]           plymouth_should_show_default_splash:checking if plymouth should show default splash
[main.c:878]           plymouth_should_show_default_splash:using default splash because kernel command line has option "splash"
[ply-device-manager.c:668]                   create_seats_from_terminals:checking for consoles
[ply-device-manager.c:555]                        add_consoles_from_file:opening /sys/class/tty/console/active
[ply-device-manager.c:563]                        add_consoles_from_file:reading file
[ply-device-manager.c:601]                        add_consoles_from_file:console /dev/ttyAMA0 found!
[ply-device-manager.c:601]                        add_consoles_from_file:console /dev/tty1 found!
[ply-device-manager.c:678]                   create_seats_from_terminals:serial consoles detected, managing them with details forced
[ply-device-manager.c:635]    create_seat_for_terminal_and_renderer_type:creating seat for /dev/ttyAMA0 (renderer type: 4294967295) (terminal: /dev/ttyAMA0)
[ply-terminal.c:600]                             ply_terminal_open:trying to open terminal '/dev/ttyAMA0'
[ply-terminal.c:395]                 ply_terminal_look_up_geometry:looking up terminal text geometry
[ply-terminal.c:409]                 ply_terminal_look_up_geometry:terminal is now 0x0 text cells
[ply-seat.c:113]                             add_text_displays:adding text display for terminal /dev/ttyAMA0
[main.c:1011]                                 on_seat_added:listening for keystrokes
[main.c:1015]                                 on_seat_added:listening for escape
[main.c:1019]                                 on_seat_added:listening for backspace
[main.c:1023]                                 on_seat_added:listening for enter
[ply-device-manager.c:635]    create_seat_for_terminal_and_renderer_type:creating seat for /dev/tty1 (renderer type: 4294967295) (terminal: /dev/tty1)
[ply-terminal.c:600]                             ply_terminal_open:trying to open terminal '/dev/tty1'
[ply-terminal.c:395]                 ply_terminal_look_up_geometry:looking up terminal text geometry
[ply-terminal.c:409]                 ply_terminal_look_up_geometry:terminal is now 60x40 text cells
[ply-terminal.c:446]                                 get_active_vt:Remembering that initial vt is 1
[ply-seat.c:113]                             add_text_displays:adding text display for terminal /dev/tty1
[main.c:1011]                                 on_seat_added:listening for keystrokes
[main.c:1015]                                 on_seat_added:listening for escape
[main.c:1019]                                 on_seat_added:listening for backspace
[main.c:1023]                                 on_seat_added:listening for enter
[main.c:2228]                                          main:entering event loop
[ply-boot-server.c:352]             print_connection_process_identity:connection is from pid 171 (/usr/bin/plymouth --show-splash) with parent pid 1 (/usr/bin/ash /init splash plymouth:debug)
[ply-boot-server.c:448]                ply_boot_connection_on_request:got show splash request
[main.c:820]      plymouth_should_ignore_show_splash_calls:checking if plymouth should be running
[main.c:919]                                on_show_splash:at least one seat already open, so loading splash
[main.c:970]                                   show_splash:delaying show splash for 0.242027 seconds
[ply-event-loop.c:965]      ply_event_loop_stop_watching_for_timeout:no matching timeout found for removal
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[main.c:850]           plymouth_should_show_default_splash:checking if plymouth should show default splash
[main.c:878]           plymouth_should_show_default_splash:using default splash because kernel command line has option "splash"
[main.c:455]                           show_default_splash:Showing splash screen
[main.c:463]                           show_default_splash:Trying system default splash
[main.c:1587]                                    load_theme:Loading boot splash theme '/usr/share/plymouth/themes/pix/pix.plymouth'
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group Plymouth Theme
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group script
[ply-key-file.c:259]                      ply_key_file_load_groups:key file has no more groups
[main.c:1602]                                    load_theme:attaching plugin to event loop
[main.c:1605]                                    load_theme:attaching progress to plugin
[ply-boot-splash.c:178]                                attach_to_seat:adding pixel displays
[ply-boot-splash.c:178]                                attach_to_seat:adding pixel displays
[ply-device-manager.c:841]         ply_device_manager_activate_renderers:activating renderers
[ply-boot-splash.c:491]                          ply_boot_splash_show:showing splash screen
[./plugin.c:413]                            show_splash_screen:no pixel displays
[ply-boot-splash.c:497]                          ply_boot_splash_show:can't show splash: Success
[ply-boot-splash.c:406]                          ply_boot_splash_free:freeing splash
[ply-event-loop.c:965]      ply_event_loop_stop_watching_for_timeout:no matching timeout found for removal
[ply-boot-splash.c:385]                             detach_from_seats:detaching from seats
[ply-boot-splash.c:110]                              detach_from_seat:removing keyboard
[ply-boot-splash.c:116]                              detach_from_seat:removing pixel displays
[ply-boot-splash.c:139]                              detach_from_seat:removing text displays
[ply-boot-splash.c:153]                              detach_from_seat:Removing 0x0 text display
[ply-boot-splash.c:110]                              detach_from_seat:removing keyboard
[ply-boot-splash.c:116]                              detach_from_seat:removing pixel displays
[ply-boot-splash.c:139]                              detach_from_seat:removing text displays
[ply-boot-splash.c:153]                              detach_from_seat:Removing 60x40 text display
[main.c:469]                           show_default_splash:Trying distribution default splash
[main.c:1587]                                    load_theme:Loading boot splash theme '/usr/share/plymouth/themes/spinner/spinner.plymouth'
[ply-key-file.c:83]                        ply_key_file_open_file:Failed to open key file /usr/share/plymouth/themes/spinner/spinner.plymouth: No such file or directory
[ply-boot-splash.c:406]                          ply_boot_splash_free:freeing splash
[ply-boot-splash.c:385]                             detach_from_seats:detaching from seats
[main.c:474]                           show_default_splash:Trying old scheme for default splash
[main.c:1587]                                    load_theme:Loading boot splash theme '/usr/share/plymouth/themes/default.plymouth'
[ply-key-file.c:83]                        ply_key_file_open_file:Failed to open key file /usr/share/plymouth/themes/default.plymouth: No such file or directory
[ply-boot-splash.c:406]                          ply_boot_splash_free:freeing splash
[ply-boot-splash.c:385]                             detach_from_seats:detaching from seats
[main.c:480]                           show_default_splash:Could not start default splash screen,showing text splash screen
[main.c:1587]                                    load_theme:Loading boot splash theme '/usr/share/plymouth/themes/text/text.plymouth'
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group Plymouth Theme
[ply-key-file.c:259]                      ply_key_file_load_groups:key file has no more groups
[./plugin.c:305]                                 create_plugin:creating plugin
[main.c:1602]                                    load_theme:attaching plugin to event loop
[main.c:1605]                                    load_theme:attaching progress to plugin
[ply-boot-splash.c:202]                                attach_to_seat:adding text displays
[ply-boot-splash.c:214]                                attach_to_seat:Adding 0x0 text display
[ply-terminal.c:596]                             ply_terminal_open:terminal /dev/ttyAMA0 is already open
[ply-boot-splash.c:202]                                attach_to_seat:adding text displays
[ply-boot-splash.c:214]                                attach_to_seat:Adding 60x40 text display
[ply-terminal.c:596]                             ply_terminal_open:terminal /dev/tty1 is already open
[ply-device-manager.c:841]         ply_device_manager_activate_renderers:activating renderers
[ply-boot-splash.c:491]                          ply_boot_splash_show:showing splash screen
[main.c:1535]                 tell_systemd_to_print_details:telling systemd to start printing details
[ply-device-manager.c:881]         ply_device_manager_activate_keyboards:activating keyboards
[main.c:273]                                 show_messages:not displaying messages, since no boot splash
[ply-boot-server.c:352]             print_connection_process_identity:connection is from pid 178 (/usr/bin/plymouth update-root-fs --new-root-dir=/new_root) with parent pid 1 (/usr/bin/ash /init splash plymouth:debug)
[ply-boot-server.c:646]                ply_boot_connection_on_request:got newroot request
[main.c:664]                                    on_newroot:new root mounted at "/new_root", switching to it
[main.c:694]                       get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to '-.mount'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'tft-config.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'tmp.mount'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'sys-kernel-debug.mount'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'dev-mqueue.mount'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 12
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 12
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-remount-fs.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 13
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 13
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-modules-load.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'kmod-static-nodes.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 12
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 12
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'sys-kernel-config.mount'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-sysctl.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-random-seed.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-tmpfiles-setup-dev.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-udevd.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-journald.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-udev-trigger.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:352]             print_connection_process_identity:connection is from pid 229 (/usr/bin/plymouth show-splash) with parent pid 1 (/sbin/init splash plymouth:debug)
[ply-boot-server.c:448]                ply_boot_connection_on_request:got show splash request
[main.c:897]                                on_show_splash:show splash called while already shown
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-journal-flush.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'boot.mount'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:352]             print_connection_process_identity:connection is from pid 231 (/usr/bin/plymouth update-root-fs --read-write) with parent pid 1 (/sbin/init splash plymouth:debug)
[ply-boot-server.c:440]                ply_boot_connection_on_request:got system initialized notification
[main.c:798]                         on_system_initialized:system now initialized, opening log
[main.c:720]                        get_log_file_for_state:returning log file '/var/log/boot.log'
[main.c:783]                               prepare_logging:opening log '/var/log/boot.log'
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-tmpfiles-setup.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-update-utmp.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-timesyncd.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'haveged.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'dbus.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-networkd.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-logind.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-rfkill.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'wpa_supplicant@wlan0.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash plymouth:debug)
[ply-boot-server.c:400]                ply_boot_connection_on_request:got update request
[main.c:216]                                     on_update:updating status to 'systemd-user-sessions.service'
[./plugin.c:529]                                 update_status:status update
[ply-event-loop.c:1060]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1064]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x15514 for fd 11
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x15984, 0x15514) of fd 11
[ply-event-loop.c:643]             ply_event_loop_remove_source_node:failed to delete fd 11 from epoll watch list: Bad file descriptor
[ply-boot-server.c:352]             print_connection_process_identity:connection is from pid 254 (/usr/bin/plymouth quit --retain-splash) with parent pid 1 (/sbin/init splash plymouth:debug)
[ply-boot-server.c:483]                ply_boot_connection_on_request:got quit --retain-splash request
[main.c:1267]                                       on_quit:quitting (retain splash: true)
[main.c:1279]                                       on_quit:system initialized so saving boot-duration file
[ply-utils.c:689]                          ply_create_directory:directory '/var/lib/plymouth/' already exists
[main.c:694]                       get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[ply-progress.c:214]                       ply_progress_save_cache:saving progress cache to /var/lib/plymouth//boot-duration
[main.c:1543]         tell_systemd_to_stop_printing_details:telling systemd to stop printing details
[main.c:1293]                                       on_quit:closing log
[ply-device-manager.c:901]       ply_device_manager_deactivate_keyboards:deactivating keyboards
[ply-seat.c:185]                  ply_seat_deactivate_keyboard:deactivating keyboard
[ply-seat.c:185]                  ply_seat_deactivate_keyboard:deactivating keyboard
[main.c:1299]                                       on_quit:unloading splash
[ply-boot-splash.c:689]                   ply_boot_splash_become_idle:telling splash to become idle
[main.c:1179]                           on_boot_splash_idle:boot splash idle
[main.c:1191]                           on_boot_splash_idle:quitting splash
[main.c:1047]                                   quit_splash:quiting splash
[main.c:1049]                                   quit_splash:freeing splash
[ply-boot-splash.c:406]                          ply_boot_splash_free:freeing splash
[ply-event-loop.c:951]      ply_event_loop_stop_watching_for_timeout:multiple matching timeouts found for removal
[ply-boot-splash.c:385]                             detach_from_seats:detaching from seats
[ply-boot-splash.c:110]                              detach_from_seat:removing keyboard
[ply-boot-splash.c:116]                              detach_from_seat:removing pixel displays
[ply-boot-splash.c:139]                              detach_from_seat:removing text displays
[ply-boot-splash.c:153]                              detach_from_seat:Removing 0x0 text display
[ply-boot-splash.c:110]                              detach_from_seat:removing keyboard
[ply-boot-splash.c:116]                              detach_from_seat:removing pixel displays
[ply-boot-splash.c:139]                              detach_from_seat:removing text displays
[ply-boot-splash.c:153]                              detach_from_seat:Removing 60x40 text display
[./plugin.c:350]                                destroy_plugin:destroying plugin
[./plugin.c:568]                            hide_splash_screen:hiding splash screen
[./plugin.c:320]                        detach_from_event_loop:detaching from event loop
[ply-device-manager.c:901]       ply_device_manager_deactivate_keyboards:deactivating keyboards
[main.c:1706]                   detach_from_running_session:detaching from terminal session
[ply-terminal-session.c:398]                   ply_terminal_session_detach:stopping terminal logger
[ply-terminal-session.c:535]             ply_terminal_session_stop_logging:stopping logging of incoming console messages
[ply-event-loop.c:759]               ply_event_loop_stop_watching_fd:stopping watching fd 9
[ply-event-loop.c:775]               ply_event_loop_stop_watching_fd:removing destination for fd 9
[ply-event-loop.c:784]               ply_event_loop_stop_watching_fd:no more destinations remaing for fd 9, removing source
[ply-terminal-session.c:403]                   ply_terminal_session_detach:unredirecting console messages
[ply-terminal-session.c:408]                   ply_terminal_session_detach:ptmx wasn't originally passed in, destroying created one
[main.c:1193]                           on_boot_splash_idle:quitting program
[main.c:1121]                                  quit_program:cleaning up devices
[ply-device-manager.c:521]                       ply_device_manager_free:freeing device manager
[ply-device-manager.c:422]                                    free_seats:removing seats
[main.c:934]                               on_seat_removed:no longer listening for keystrokes
[main.c:938]                               on_seat_removed:no longer listening for escape
[main.c:942]                               on_seat_removed:no longer listening for backspace
[main.c:946]                               on_seat_removed:no longer listening for enter
[ply-seat.c:307]                           free_pixel_displays:freeing 0 pixel displays
[ply-seat.c:328]                            free_text_displays:freeing 1 text displays
[main.c:934]                               on_seat_removed:no longer listening for keystrokes
[main.c:938]                               on_seat_removed:no longer listening for escape
[main.c:942]                               on_seat_removed:no longer listening for backspace
[main.c:946]                               on_seat_removed:no longer listening for enter
[ply-seat.c:307]                           free_pixel_displays:freeing 0 pixel displays
[ply-seat.c:328]                            free_text_displays:freeing 1 text displays
[ply-terminal.c:669]                            ply_terminal_close:restoring color palette
[ply-terminal.c:673]                            ply_terminal_close:stop watching tty fd
[ply-event-loop.c:759]               ply_event_loop_stop_watching_fd:stopping watching fd 7
[ply-event-loop.c:775]               ply_event_loop_stop_watching_fd:removing destination for fd 7
[ply-event-loop.c:784]               ply_event_loop_stop_watching_fd:no more destinations remaing for fd 7, removing source
[ply-terminal.c:679]                            ply_terminal_close:stop watching SIGWINCH signal
[ply-terminal.c:683]                            ply_terminal_close:setting buffered input
[ply-terminal.c:669]                            ply_terminal_close:restoring color palette
[ply-terminal.c:673]                            ply_terminal_close:stop watching tty fd
[ply-event-loop.c:759]               ply_event_loop_stop_watching_fd:stopping watching fd 10
[ply-event-loop.c:775]               ply_event_loop_stop_watching_fd:removing destination for fd 10
[ply-event-loop.c:784]               ply_event_loop_stop_watching_fd:no more destinations remaing for fd 10, removing source
[ply-terminal.c:679]                            ply_terminal_close:stop watching SIGWINCH signal
[ply-terminal.c:683]                            ply_terminal_close:setting buffered input
[main.c:1124]                                  quit_program:exiting event loop
[ply-boot-server.c:314]          ply_boot_connection_on_quit_complete:quit complete
[main.c:2230]                                          main:exited event loop
[ply-boot-splash.c:406]                          ply_boot_splash_free:freeing splash
[main.c:2240]                                          main:freeing terminal session
[ply-terminal-session.c:535]             ply_terminal_session_stop_logging:stopping logging of incoming console messages
[main.c:2246]                                          main:exiting with code 0
CD1
 
Posts: 15
Joined: Mon Aug 01, 2016 2:09 am

Return to ARMv6h

Who is online

Users browsing this forum: No registered users and 1 guest