enc28j60 packet loss over 50%

This forum is for topics dealing with problems with software specifically in the ARMv6h repo.

enc28j60 packet loss over 50%

Postby w0w » Sun Oct 03, 2021 8:04 am

Installed Arch Linux on to Pi ZeroW with attached enc28j60 interface, configured.
$this->bbcode_second_pass_code('', '
dtparam=spi=on
dtoverlay=enc28j60
')
When I ping Pi from any host in the network, it's OK, no packet loss, but when I try to ping any host from Pi, then I got 50 to 80% packet loss. Also it is almost impossible to use the interface.

Tried Pi OS from https://www.raspberrypi.org/software/operating-systems/ with same config, and ping works both ways without packet loss.
Interface is also working fine.

Looked at driver version, it's the same for both systems.
Any thoughts?
w0w
 
Posts: 1
Joined: Sun Oct 03, 2021 7:50 am

Re: enc28j60 packet loss over 50%

Postby graysky » Sun Oct 03, 2021 9:07 am

You probably want to post to the official rpi forum as well: https://www.raspberrypi.org/forums/viewforum.php?f=28
graysky
Developer
 
Posts: 1728
Joined: Sun Jun 26, 2011 6:56 am
Location: /run/user/1000


Return to ARMv6h

Who is online

Users browsing this forum: No registered users and 8 guests