I have this mouse and keyboard and Im Runing ArchlinuxARM on a Raspberry pi B+ with LXDE, and when i do startx desktop start and everything works fine until i move the mouse and boom Xorg crash, if i see the log, looks like something related to udev, BTW, i tried my mouse and keyboard on OpenElec and on my notebook (Arch x86_64) and it's running good so it's something on ArchlinuxARM, here the logs:
$this->bbcode_second_pass_code('', 'cat /var/log/Xorg.0.log
[ 1053.836]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 1053.837] X Protocol Version 11, Revision 0
[ 1053.837] Build Operating System: Linux 3.10.63-6-ARCH armv6l
[ 1053.837] Current Operating System: Linux ArchBerry 3.18.8-4-ARCH #1 PREEMPT Thu Mar 5 18:05:39 MST 2015 armv6l
[ 1053.838] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1312 bcm2708_fb.fbheight=736 bcm2708.boardrev=0x10 bcm2708.serial=0x57945e33 smsc95xx.macaddr=B8:27:EB:94:5E:33 bcm2708_fb.fbswap=1 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=noop rw rootwait
[ 1053.839] Build Date: 22 February 2015 07:05:00AM
[ 1053.839]
[ 1053.840] Current version of pixman: 0.32.6
[ 1053.840] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1053.840] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1053.842] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 6 20:59:19 2015
[ 1053.847] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1053.853] (==) No Layout section. Using the first Screen section.
[ 1053.854] (==) No screen section available. Using defaults.
[ 1053.854] (**) |-->Screen "Default Screen Section" (0)
[ 1053.854] (**) | |-->Monitor "<default monitor>"
[ 1053.855] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1053.855] (==) Automatically adding devices
[ 1053.855] (==) Automatically enabling devices
[ 1053.855] (==) Automatically adding GPU devices
[ 1053.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 1053.860] Entry deleted from font path.
[ 1053.860] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 1053.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1053.860] Entry deleted from font path.
[ 1053.872] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1053.872] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1053.872] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1053.872] (II) Loader magic: 0x1e0ed8
[ 1053.872] (II) Module ABI versions:
[ 1053.872] X.Org ANSI C Emulation: 0.4
[ 1053.873] X.Org Video Driver: 19.0
[ 1053.873] X.Org XInput driver : 21.0
[ 1053.873] X.Org Server Extension : 9.0
[ 1053.889] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 1053.890] (II) no primary bus or device found
[ 1053.891] (II) LoadModule: "glx"
[ 1053.896] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1053.933] (II) Module glx: vendor="X.Org Foundation"
[ 1053.934] compiled for 1.17.1, module version = 1.0.0
[ 1053.934] ABI class: X.Org Server Extension, version 9.0
[ 1053.934] (==) AIGLX enabled
[ 1053.934] (==) Matched modesetting as autoconfigured driver 0
[ 1053.934] (==) Matched fbdev as autoconfigured driver 1
[ 1053.934] (==) Assigned the driver to the xf86ConfigLayout
[ 1053.934] (II) LoadModule: "modesetting"
[ 1053.937] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1053.942] (II) Module modesetting: vendor="X.Org Foundation"
[ 1053.942] compiled for 1.17.1, module version = 1.17.1
[ 1053.942] Module class: X.Org Video Driver
[ 1053.942] ABI class: X.Org Video Driver, version 19.0
[ 1053.942] (II) LoadModule: "fbdev"
[ 1053.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1053.945] (II) Module fbdev: vendor="X.Org Foundation"
[ 1053.945] compiled for 1.17.1, module version = 0.4.4
[ 1053.945] Module class: X.Org Video Driver
[ 1053.945] ABI class: X.Org Video Driver, version 19.0
[ 1053.946] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1053.946] (II) FBDEV: driver for framebuffer: fbdev
[ 1053.946] (++) using VT number 1
[ 1053.946] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 1053.946] (WW) Falling back to old probe method for modesetting
[ 1053.947] (EE) open /dev/dri/card0: No such file or directory
[ 1053.947] (WW) Falling back to old probe method for fbdev
[ 1053.947] (II) Loading sub module "fbdevhw"
[ 1053.947] (II) LoadModule: "fbdevhw"
[ 1053.948] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1053.950] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1053.950] compiled for 1.17.1, module version = 0.0.2
[ 1053.950] ABI class: X.Org Video Driver, version 19.0
[ 1053.951] (II) FBDEV(0): using default device
[ 1053.951] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1053.951] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 1053.952] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[ 1053.952] (==) FBDEV(0): RGB weight 565
[ 1053.952] (==) FBDEV(0): Default visual is TrueColor
[ 1053.952] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1053.952] (II) FBDEV(0): hardware: BCM2708 FB (video memory: 1886kB)
[ 1053.952] (II) FBDEV(0): checking modes against framebuffer device...
[ 1053.952] (II) FBDEV(0): checking modes against monitor...
[ 1053.953] (--) FBDEV(0): Virtual size is 1312x736 (pitch 1312)
[ 1053.953] (**) FBDEV(0): Built-in mode "current"
[ 1053.953] (==) FBDEV(0): DPI set to (96, 96)
[ 1053.953] (II) Loading sub module "fb"
[ 1053.953] (II) LoadModule: "fb"
[ 1053.954] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1053.958] (II) Module fb: vendor="X.Org Foundation"
[ 1053.958] compiled for 1.17.1, module version = 1.0.0
[ 1053.958] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1053.958] (**) FBDEV(0): using shadow framebuffer
[ 1053.958] (II) Loading sub module "shadow"
[ 1053.958] (II) LoadModule: "shadow"
[ 1053.959] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 1053.961] (II) Module shadow: vendor="X.Org Foundation"
[ 1053.961] compiled for 1.17.1, module version = 1.1.0
[ 1053.961] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1053.961] (II) UnloadModule: "modesetting"
[ 1053.961] (II) Unloading modesetting
[ 1053.964] (==) FBDEV(0): Backing store enabled
[ 1053.965] (==) FBDEV(0): DPMS enabled
[ 1053.965] (==) RandR enabled
[ 1054.026] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1054.027] (EE) AIGLX: reverting to software rendering
[ 1054.428] (II) AIGLX: Loaded and initialized swrast
[ 1054.428] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1056.317] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/event0)
[ 1056.317] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev pointer catchall"
[ 1056.317] (**) 2.4GHz 2way RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 1056.317] (**) 2.4GHz 2way RF Receiver: Applying InputClass "libinput pointer catchall"
[ 1056.318] (**) 2.4GHz 2way RF Receiver: Applying InputClass "libinput keyboard catchall"
[ 1056.318] (II) LoadModule: "libinput"
[ 1056.318] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1056.328] (II) Module libinput: vendor="X.Org Foundation"
[ 1056.328] compiled for 1.17.1, module version = 0.7.0
[ 1056.328] Module class: X.Org XInput Driver
[ 1056.328] ABI class: X.Org XInput driver, version 21.0
[ 1056.333] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 10 paused 0
[ 1056.333] (II) Using input driver 'libinput' for '2.4GHz 2way RF Receiver'
[ 1056.333] (**) 2.4GHz 2way RF Receiver: always reports core events
[ 1056.333] (**) Option "Device" "/dev/input/event0"
[ 1056.337] (II) input device '2.4GHz 2way RF Receiver', /dev/input/event0 is tagged by udev as: Keyboard Mouse
[ 1056.337] (II) input device '2.4GHz 2way RF Receiver', /dev/input/event0 is a pointer caps
[ 1056.337] (II) input device '2.4GHz 2way RF Receiver', /dev/input/event0 is a keyboard
[ 1056.339] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1BCF:053A.0001/input/input0/event0"
[ 1056.339] (II) XINPUT: Adding extended input device "2.4GHz 2way RF Receiver" (type: MOUSE, id 6)
[ 1056.342] (**) Option "AccelerationScheme" "none"
[ 1056.342] (**) 2.4GHz 2way RF Receiver: (accel) selected scheme none/0
[ 1056.342] (**) 2.4GHz 2way RF Receiver: (accel) acceleration factor: 2.000
[ 1056.342] (**) 2.4GHz 2way RF Receiver: (accel) acceleration threshold: 4
[ 1056.345] (II) input device '2.4GHz 2way RF Receiver', /dev/input/event0 is tagged by udev as: Keyboard Mouse
[ 1056.345] (II) input device '2.4GHz 2way RF Receiver', /dev/input/event0 is a pointer caps
[ 1056.345] (II) input device '2.4GHz 2way RF Receiver', /dev/input/event0 is a keyboard
[ 1056.349] (II) config/udev: Adding input device 2.4GHz 2way RF Receiver (/dev/input/mouse0)
[ 1056.349] (II) No input driver specified, ignoring this device.
[ 1056.349] (II) This device may have been added with another device file.
[ 1056.352] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/event1)
[ 1056.353] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "evdev keyboard catchall"
[ 1056.353] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "libinput keyboard catchall"
[ 1056.356] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
[ 1056.356] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Desktop® 2.10'
[ 1056.356] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: always reports core events
[ 1056.357] (**) Option "Device" "/dev/input/event1"
[ 1056.359] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is tagged by udev as: Keyboard
[ 1056.359] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is a keyboard
[ 1056.360] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:009D.0002/input/input1/event1"
[ 1056.360] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 2.10" (type: KEYBOARD, id 7)
[ 1056.364] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is tagged by udev as: Keyboard
[ 1056.364] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is a keyboard
[ 1056.368] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/event2)
[ 1056.368] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "evdev pointer catchall"
[ 1056.368] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "evdev keyboard catchall"
[ 1056.368] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "libinput pointer catchall"
[ 1056.368] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "libinput keyboard catchall"
[ 1056.372] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0
[ 1056.372] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Desktop® 2.10'
[ 1056.372] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: always reports core events
[ 1056.372] (**) Option "Device" "/dev/input/event2"
[ 1056.375] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 1056.375] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a pointer caps
[ 1056.375] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a keyboard
[ 1056.376] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:009D.0003/input/input2/event2"
[ 1056.376] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 2.10" (type: MOUSE, id 8)
[ 1056.378] (**) Option "AccelerationScheme" "none"
[ 1056.378] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) selected scheme none/0
[ 1056.378] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) acceleration factor: 2.000
[ 1056.378] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) acceleration threshold: 4
[ 1056.381] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 1056.381] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a pointer caps
[ 1056.381] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a keyboard
[ 1056.385] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/js0)
[ 1056.385] (II) No input driver specified, ignoring this device.
[ 1056.385] (II) This device may have been added with another device file.
[ 1056.388] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/mouse1)
[ 1056.388] (II) No input driver specified, ignoring this device.
[ 1056.388] (II) This device may have been added with another device file.
[ 2375.691] (EE) FBDEV(0): FBIOBLANK: Operation not permitted')
Ups ^ this log dont show the segfault, sorry xD
Another more clear log
$this->bbcode_second_pass_code('', '[pi@ArchBerry ~]$ sudo cat /var/log/Xorg.0.log
[ 11579.586]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 11579.596] X Protocol Version 11, Revision 0
[ 11579.600] Build Operating System: Linux 3.10.63-6-ARCH armv6l
[ 11579.603] Current Operating System: Linux ArchBerry 3.18.8-4-ARCH #1 PREEMPT Thu Mar 5 18:05:39 MST 2015 armv6l
[ 11579.604] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1312 bcm2708_fb.fbheight=736 bcm2708.boardrev=0x10 bcm2708.serial=0x57945e33 smsc95xx.macaddr=B8:27:EB:94:5E:33 bcm2708_fb.fbswap=1 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=noop rw rootwait
[ 11579.622] Build Date: 22 February 2015 07:05:00AM
[ 11579.626]
[ 11579.629] Current version of pixman: 0.32.6
[ 11579.636] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11579.636] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11579.651] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 6 23:54:44 2015
[ 11579.656] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11579.658] (==) No Layout section. Using the first Screen section.
[ 11579.658] (==) No screen section available. Using defaults.
[ 11579.658] (**) |-->Screen "Default Screen Section" (0)
[ 11579.658] (**) | |-->Monitor "<default monitor>"
[ 11579.659] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11579.659] (==) Automatically adding devices
[ 11579.659] (==) Automatically enabling devices
[ 11579.659] (==) Automatically adding GPU devices
[ 11579.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 11579.660] Entry deleted from font path.
[ 11579.660] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 11579.660] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11579.660] Entry deleted from font path.
[ 11579.661] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11579.661] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11579.661] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11579.661] (II) Loader magic: 0x1e0ed8
[ 11579.661] (II) Module ABI versions:
[ 11579.661] X.Org ANSI C Emulation: 0.4
[ 11579.661] X.Org Video Driver: 19.0
[ 11579.661] X.Org XInput driver : 21.0
[ 11579.661] X.Org Server Extension : 9.0
[ 11579.678] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 11579.679] (II) no primary bus or device found
[ 11579.679] (II) LoadModule: "glx"
[ 11579.681] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11579.716] (II) Module glx: vendor="X.Org Foundation"
[ 11579.717] compiled for 1.17.1, module version = 1.0.0
[ 11579.717] ABI class: X.Org Server Extension, version 9.0
[ 11579.717] (==) AIGLX enabled
[ 11579.717] (==) Matched modesetting as autoconfigured driver 0
[ 11579.717] (==) Matched fbdev as autoconfigured driver 1
[ 11579.717] (==) Assigned the driver to the xf86ConfigLayout
[ 11579.717] (II) LoadModule: "modesetting"
[ 11579.719] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11579.720] (II) Module modesetting: vendor="X.Org Foundation"
[ 11579.720] compiled for 1.17.1, module version = 1.17.1
[ 11579.720] Module class: X.Org Video Driver
[ 11579.720] ABI class: X.Org Video Driver, version 19.0
[ 11579.720] (II) LoadModule: "fbdev"
[ 11579.721] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11579.722] (II) Module fbdev: vendor="X.Org Foundation"
[ 11579.722] compiled for 1.17.1, module version = 0.4.4
[ 11579.722] Module class: X.Org Video Driver
[ 11579.722] ABI class: X.Org Video Driver, version 19.0
[ 11579.723] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11579.723] (II) FBDEV: driver for framebuffer: fbdev
[ 11579.723] (++) using VT number 1
[ 11579.723] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 11579.724] (WW) Falling back to old probe method for modesetting
[ 11579.724] (EE) open /dev/dri/card0: No such file or directory
[ 11579.724] (WW) Falling back to old probe method for fbdev
[ 11579.724] (II) Loading sub module "fbdevhw"
[ 11579.724] (II) LoadModule: "fbdevhw"
[ 11579.725] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11579.726] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11579.726] compiled for 1.17.1, module version = 0.0.2
[ 11579.726] ABI class: X.Org Video Driver, version 19.0
[ 11579.727] (II) FBDEV(0): using default device
[ 11579.727] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 11579.727] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 11579.727] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[ 11579.727] (==) FBDEV(0): RGB weight 565
[ 11579.727] (==) FBDEV(0): Default visual is TrueColor
[ 11579.728] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11579.728] (II) FBDEV(0): hardware: BCM2708 FB (video memory: 1886kB)
[ 11579.728] (II) FBDEV(0): checking modes against framebuffer device...
[ 11579.728] (II) FBDEV(0): checking modes against monitor...
[ 11579.728] (--) FBDEV(0): Virtual size is 1312x736 (pitch 1312)
[ 11579.729] (**) FBDEV(0): Built-in mode "current"
[ 11579.729] (==) FBDEV(0): DPI set to (96, 96)
[ 11579.729] (II) Loading sub module "fb"
[ 11579.729] (II) LoadModule: "fb"
[ 11579.729] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11579.733] (II) Module fb: vendor="X.Org Foundation"
[ 11579.733] compiled for 1.17.1, module version = 1.0.0
[ 11579.733] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11579.733] (**) FBDEV(0): using shadow framebuffer
[ 11579.733] (II) Loading sub module "shadow"
[ 11579.733] (II) LoadModule: "shadow"
[ 11579.734] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 11579.735] (II) Module shadow: vendor="X.Org Foundation"
[ 11579.735] compiled for 1.17.1, module version = 1.1.0
[ 11579.735] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11579.735] (II) UnloadModule: "modesetting"
[ 11579.735] (II) Unloading modesetting
[ 11579.738] (==) FBDEV(0): Backing store enabled
[ 11579.739] (==) FBDEV(0): DPMS enabled
[ 11579.739] (==) RandR enabled
[ 11579.800] (II) AIGLX: Screen 0 is not DRI2 capable
[ 11579.800] (EE) AIGLX: reverting to software rendering
[ 11580.107] (II) AIGLX: Loaded and initialized swrast
[ 11580.108] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 11581.919] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/event1)
[ 11581.920] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "evdev keyboard catchall"
[ 11581.920] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "libinput keyboard catchall"
[ 11581.920] (II) LoadModule: "libinput"
[ 11581.921] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11581.926] (II) Module libinput: vendor="X.Org Foundation"
[ 11581.926] compiled for 1.17.1, module version = 0.7.0
[ 11581.926] Module class: X.Org XInput Driver
[ 11581.926] ABI class: X.Org XInput driver, version 21.0
[ 11581.929] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 10 paused 0
[ 11581.930] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Desktop® 2.10'
[ 11581.930] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: always reports core events
[ 11581.930] (**) Option "Device" "/dev/input/event1"
[ 11581.934] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is tagged by udev as: Keyboard
[ 11581.934] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is a keyboard
[ 11581.935] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:009D.0002/input/input1/event1"
[ 11581.935] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 2.10" (type: KEYBOARD, id 6)
[ 11581.939] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is tagged by udev as: Keyboard
[ 11581.940] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event1 is a keyboard
[ 11581.944] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/event2)
[ 11581.944] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "evdev pointer catchall"
[ 11581.944] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "evdev keyboard catchall"
[ 11581.944] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "libinput pointer catchall"
[ 11581.944] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Applying InputClass "libinput keyboard catchall"
[ 11581.948] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 13 paused 0
[ 11581.948] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Desktop® 2.10'
[ 11581.948] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: always reports core events
[ 11581.948] (**) Option "Device" "/dev/input/event2"
[ 11581.951] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 11581.952] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a pointer caps
[ 11581.952] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a keyboard
[ 11581.953] (**) Option "config_info" "udev:/sys/devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:009D.0003/input/input2/event2"
[ 11581.953] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 2.10" (type: MOUSE, id 7)
[ 11581.955] (**) Option "AccelerationScheme" "none"
[ 11581.955] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) selected scheme none/0
[ 11581.955] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) acceleration factor: 2.000
[ 11581.955] (**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) acceleration threshold: 4
[ 11581.958] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[ 11581.958] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a pointer caps
[ 11581.958] (II) input device 'Microsoft Microsoft Wireless Optical Desktop® 2.10', /dev/input/event2 is a keyboard
[ 11581.962] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/js0)
[ 11581.962] (II) No input driver specified, ignoring this device.
[ 11581.962] (II) This device may have been added with another device file.
[ 11581.965] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10 (/dev/input/mouse1)
[ 11581.965] (II) No input driver specified, ignoring this device.
[ 11581.965] (II) This device may have been added with another device file.
[ 11595.411] (EE)
[ 11595.412] (EE) Backtrace:
[ 11595.412] (EE)
[ 11595.413] (EE) Segmentation fault at address 0x8
[ 11595.413] (EE)
Fatal server error:
[ 11595.414] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 11595.414] (EE)
[ 11595.414] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11595.415] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 11595.415] (EE)
[ 11595.439] (EE) Server terminated with error (1). Closing log file.
')
EDIT:My keyboard and mouse are Microsoft Wireless Optical Desktop 1000 I put this link cause the other looks like it's not working
Thx!