Aurora inverter ti_usb_3410_5052

[haiku]

Hello,
I'am trying to connect my Pogo to an Aurora Inverter with this program. I'am trying to connect,in vain, with an usb cable.
But it seem like ArchLinux miss a driver. dmesg give me
$this->bbcode_second_pass_code('', '
[ 15.801287] ti_usb_3410_5052 1-1.4:1.0: TI USB 3410 1 port adapter converter detected
[ 15.922764] usb 1-1.4: ti_download_firmware - firmware not found
[ 15.922810] ti_usb_3410_5052: probe of 1-1.4:1.0 failed with error -5
[ 15.929441] usbcore: registered new interface driver ti_usb_3410_5052
[ 15.929455] ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
') and lsusb :
$this->bbcode_second_pass_code('', '
Bus 001 Device 006: ID 0451:3410 Texas Instruments, Inc. TUSB3410 Microcontroller
')
And, well i'am a noob what i'am i suppose to do now ?
thanks

[haiku]

The module seem loaded
$this->bbcode_second_pass_code('', 'lsmod
Module Size Used by
ipv6 238321 12
ti_usb_3410_5052 18749 0
usbserial 26549 1 ti_usb_3410_5052
sr_mod 11698 1
cdrom 32732 1 sr_mod
mv_cesa 8959 0
')
But i believe i miss the firmware of TUSB3410

[haiku]

I've just installed linux-firmware
dmesg give
$this->bbcode_second_pass_code('', '
[ 16.073127] ti_usb_3410_5052 1-1.3:1.0: TI USB 3410 1 port adapter converter detected
[ 16.073182] ti_usb_3410_5052: probe of 1-1.3:1.0 failed with error -5
[ 16.079003] ti_usb_3410_5052 1-1.3:2.0: TI USB 3410 1 port adapter converter detected
[ 16.080072] usb 1-1.3: TI USB 3410 1 port adapter converter now attached to ttyUSB0
')
but still can't connect.. i'll continue later on

[kmihelich]

linux-firmware doesn't contain every firmware for every device, it would be incredibly massive if it did that. You should be able to find the firmware files from the manufacturer if that's what you're missing.