LCD a20 olinuxino micro

[billy48]

Hi.
I have succesfully created a sd-card with ALARM that is working on my desktop display through HDMI. Now I have a 10'' LCD display and I'm not able to get any video signal on it. I have plugged it into the proper slot on board and I had modified the script.bin file via bi2fex and fex2bin from sunxi-tools.
I also have the debian distro that is working great (on LCD) after running the /root/change_display*.sh script. I have tried to follow that script and adapt it for the ALARM distro but still no results.
After power on the LCD is flashing for 1 sec and then I get the black screen. Is there a way to fix it? Thanks.

[WarheadsSE]

Depending on the kernel, this is no longer a part of fex, but is used with the DT files.

[billy48]

The kernel is 3.4.61, as i didn't make any changes to ALARM. Is there a way to run ALARM on olinuxino-lcd 10'' ? I have to mention that i searched all over the internet about this issue and I found no answer.
Any help will be greatly appreciated. Thank you!

[WarheadsSE]

Well a black screen is not a complete lack of video signal.

Unfortunately, I have no video hardware from Olimex, so this is a hard one for me to test with.