[SOLVED] Issues with WIFI on cubox-i

[GAZ082]

Check the DMESG:

$this->bbcode_second_pass_code('', '
[ 536.549774] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 536.628859] usbcore: registered new interface driver r8188eu
[ 742.454766] R8188EU: Firmware Version 11, SubVersion 1, Signature 0x88e1
[ 835.981171] R8188EU: ERROR indicate disassoc
[ 837.828117] R8188EU: ERROR indicate disassoc
[ 839.172445] R8188EU: ERROR indicate disassoc
[ 857.544195] R8188EU: ERROR indicate disassoc
[ 857.663126] R8188EU: ERROR indicate disassoc
[ 859.200817] R8188EU: ERROR indicate disassoc
[ 860.837467] R8188EU: ERROR indicate disassoc
[ 862.372134] R8188EU: ERROR indicate disassoc
[ 876.161779] R8188EU: ERROR indicate disassoc
[ 877.460697] R8188EU: ERROR indicate disassoc
[ 1013.460045] R8188EU: ERROR indicate disassoc
[ 1013.708687] R8188EU: ERROR indicate disassoc
[ 1015.244187] R8188EU: ERROR indicate disassoc
[ 1016.883642] R8188EU: ERROR indicate disassoc
[ 1018.521041] R8188EU: ERROR indicate disassoc
[ 1032.197243] R8188EU: ERROR indicate disassoc
[ 1033.531385] R8188EU: ERROR indicate disassoc
')

[GAZ082]

Solved this. Went to:

https://github.com/lwfinger/rtl8188eu/tree/v4.1.8_9499

Compiled and worked.

[moonman]

See if pulling this same package from AUR solves the problem too. It may be that the code in our repo is too old. With AUR you wull pull the latest git tree. If it solves the problem I will update the package in our repos too. Thanks.