rpi3b+ no HDMI output

This forum is for topics dealing with problems with software specifically in the ARMv7h repo.

rpi3b+ no HDMI output

Postby unbekannt » Fri May 06, 2022 4:21 pm

Hey everyone,

I've been using my rpi 3b+ for a year just to run some services that I needed, without any X server. But now I decided to use it for other stuff, and for that I installed xorg and I have been trying to get it to work but I have been failing miserably.
My rpi is actually booting from an external SSD drive, without any SD card being used.

My config.txt:
$this->bbcode_second_pass_code('', '
# See /boot/overlays/README for all available options

enable_uart=1
dtoverlay=vc4-kms-v3d
dtparam=krnbt=on
hdmi_force_hotplug=1
initramfs initramfs-linux.img followkernel


[pi4]
# Run as fast as firmware / board allows
#arm_boost=1
')

And cmdline.txt
$this->bbcode_second_pass_code('', '
root=PARTUUID=e9659c64-02 rootfstype=ext4 rw rootwait console=serial0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
')

I've already tried to run i3, openbox and lastly lxde, but all give the same black screen, but I do see the booting log and login on tty1.
Here is the xorg log of the last try with i3:
$this->bbcode_second_pass_code('', '
[ 223.502]
X.Org X Server 1.21.1.3
X Protocol Version 11, Revision 0
[ 223.527] Current Operating System: Linux alarmpi 5.15.36-2-rpi-ARCH #1 SMP Tue May 3 14:40:13 UTC 2022 armv7l
[ 223.528] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=PARTUUID=e9659c64-02 rootfstype=ext4 rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[ 223.554]
[ 223.562] Current version of pixman: 0.40.0
[ 223.575] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 223.575] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 223.601] (==) Log file: "/home/alarm/.local/share/xorg/Xorg.0.log", Time: Fri May 6 18:16:53 2022
[ 223.621] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 223.623] (==) No Layout section. Using the first Screen section.
[ 223.623] (==) No screen section available. Using defaults.
[ 223.623] (**) |-->Screen "Default Screen Section" (0)
[ 223.623] (**) | |-->Monitor "<default monitor>"
[ 223.624] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 223.624] (==) Automatically adding devices
[ 223.624] (==) Automatically enabling devices
[ 223.624] (==) Automatically adding GPU devices
[ 223.624] (==) Automatically binding GPU devices
[ 223.624] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 223.655] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 223.655] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 223.655] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 223.655] (II) Module ABI versions:
[ 223.655] X.Org ANSI C Emulation: 0.4
[ 223.655] X.Org Video Driver: 25.2
[ 223.655] X.Org XInput driver : 24.4
[ 223.655] X.Org Server Extension : 10.0
[ 223.658] (++) using VT number 1

[ 223.664] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 223.668] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 223.668] (II) Platform probe for /sys/devices/platform/soc/soc:gpu/drm/card0
[ 223.671] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 223.672] (II) no primary bus or device found
[ 223.672] falling back to /sys/devices/platform/soc/soc:gpu/drm/card0
[ 223.672] (II) LoadModule: "glx"
[ 223.678] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 223.716] (II) Module glx: vendor="X.Org Foundation"
[ 223.716] compiled for 1.21.1.3, module version = 1.0.0
[ 223.716] ABI class: X.Org Server Extension, version 10.0
[ 223.716] (==) Matched modesetting as autoconfigured driver 0
[ 223.716] (==) Matched fbdev as autoconfigured driver 1
[ 223.716] (==) Assigned the driver to the xf86ConfigLayout
[ 223.716] (II) LoadModule: "modesetting"
[ 223.719] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 223.747] (II) Module modesetting: vendor="X.Org Foundation"
[ 223.747] compiled for 1.21.1.3, module version = 1.21.1
[ 223.747] Module class: X.Org Video Driver
[ 223.747] ABI class: X.Org Video Driver, version 25.2
[ 223.747] (II) LoadModule: "fbdev"
[ 223.748] (WW) Warning, couldn't open module fbdev
[ 223.748] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 223.748] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 223.748] (II) modeset(0): using drv /dev/dri/card0
[ 223.748] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 223.749] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 223.749] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 223.749] (==) modeset(0): RGB weight 888
[ 223.749] (==) modeset(0): Default visual is TrueColor
[ 223.749] (II) Loading sub module "glamoregl"
[ 223.749] (II) LoadModule: "glamoregl"
[ 223.749] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 223.806] (II) Module glamoregl: vendor="X.Org Foundation"
[ 223.806] compiled for 1.21.1.3, module version = 1.0.1
[ 223.806] ABI class: X.Org ANSI C Emulation, version 0.4
[ 225.368] (II) modeset(0): glamor X acceleration enabled on VC4 V3D 2.1
[ 225.368] (II) modeset(0): glamor initialized
[ 225.368] (==) modeset(0): VariableRefresh: disabled
[ 225.368] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 225.395] (II) modeset(0): Output HDMI-1 has no monitor section
[ 225.438] (II) modeset(0): EDID for output HDMI-1
[ 225.438] (II) modeset(0): Manufacturer: DEL Model: d106 Serial#: 810239574
[ 225.438] (II) modeset(0): Year: 2021 Week: 20
[ 225.438] (II) modeset(0): EDID Version: 1.3
[ 225.438] (II) modeset(0): Digital Display Input
[ 225.438] (II) modeset(0): Max Image Size [cm]: horiz.: 70 vert.: 40
[ 225.438] (II) modeset(0): Gamma: 2.20
[ 225.439] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 225.439] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 225.439] (II) modeset(0): First detailed timing is preferred mode
[ 225.439] (II) modeset(0): redX: 0.676 redY: 0.312 greenX: 0.276 greenY: 0.656
[ 225.439] (II) modeset(0): blueX: 0.153 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
[ 225.439] (II) modeset(0): Supported established timings:
[ 225.439] (II) modeset(0): 720x400@70Hz
[ 225.439] (II) modeset(0): 640x480@60Hz
[ 225.439] (II) modeset(0): 640x480@75Hz
[ 225.439] (II) modeset(0): 800x600@60Hz
[ 225.439] (II) modeset(0): 800x600@75Hz
[ 225.439] (II) modeset(0): 1024x768@60Hz
[ 225.439] (II) modeset(0): 1024x768@75Hz
[ 225.439] (II) modeset(0): 1280x1024@75Hz
[ 225.439] (II) modeset(0): Manufacturer's mask: 0
[ 225.439] (II) modeset(0): Supported standard timings:
[ 225.440] (II) modeset(0): #0: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 225.440] (II) modeset(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 225.440] (II) modeset(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 225.440] (II) modeset(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 225.440] (II) modeset(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 225.440] (II) modeset(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 225.440] (II) modeset(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 225.440] (II) modeset(0): Supported detailed timing:
[ 225.440] (II) modeset(0): clock: 594.0 MHz Image Size: 697 x 392 mm
[ 225.440] (II) modeset(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 h_blank_end 4400 h_border: 0
[ 225.440] (II) modeset(0): v_active: 2160 v_sync: 2168 v_sync_end 2178 v_blanking: 2250 v_border: 0
[ 225.440] (II) modeset(0): Serial No: 1YCRTB3
[ 225.440] (II) modeset(0): Monitor name: DELL S3221QS
[ 225.440] (II) modeset(0): Ranges: V min: 40 V max: 60 Hz, H min: 29 H max: 140 kHz, PixClock max 605 MHz
[ 225.440] (II) modeset(0): Supported detailed timing:
[ 225.441] (II) modeset(0): clock: 241.5 MHz Image Size: 697 x 392 mm
[ 225.441] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 225.441] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0
[ 225.441] (II) modeset(0): Supported detailed timing:
[ 225.441] (II) modeset(0): clock: 148.5 MHz Image Size: 697 x 392 mm
[ 225.441] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 225.441] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 225.441] (II) modeset(0): Supported detailed timing:
[ 225.441] (II) modeset(0): clock: 442.0 MHz Image Size: 697 x 392 mm
[ 225.441] (II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3936 h_blank_end 4000 h_border: 0
[ 225.441] (II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2211 v_border: 0
[ 225.441] (II) modeset(0): Number of EDID sections to follow: 1
[ 225.441] (II) modeset(0): EDID (in hex):
[ 225.442] (II) modeset(0): 00ffffffffffff0010ac06d156464b30
[ 225.442] (II) modeset(0): 141f010380462878ea3c55ad4f46a827
[ 225.442] (II) modeset(0): 115054a54b00a9c0b300d100714fa940
[ 225.442] (II) modeset(0): 8180d1c0010108e80030f2705a80b058
[ 225.442] (II) modeset(0): 8a00b9882100001a000000ff00315943
[ 225.442] (II) modeset(0): 525442330a2020202020000000fc0044
[ 225.442] (II) modeset(0): 454c4c20533332323151530a000000fd
[ 225.442] (II) modeset(0): 00283c1d8c3c000a2020202020200152
[ 225.442] (II) modeset(0): 020340f1546105040302071601061112
[ 225.442] (II) modeset(0): 1513141f105d5e5f6023090707830100
[ 225.442] (II) modeset(0): 006d030c002000383c20006001020367
[ 225.442] (II) modeset(0): d85dc401788000681a00000101283ce6
[ 225.442] (II) modeset(0): 565e00a0a0a0295030203500b9882100
[ 225.443] (II) modeset(0): 001a023a801871382d40582c4500b988
[ 225.443] (II) modeset(0): 2100001ea8ac00a0f070338030303500
[ 225.443] (II) modeset(0): b9882100001a00000000000000000007
[ 225.443] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[ 225.443] (II) modeset(0): Printing probed modes for output HDMI-1
[ 225.443] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 225.444] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 225.444] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 225.444] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 225.444] (II) modeset(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 225.444] (II) modeset(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 225.444] (II) modeset(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 225.444] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 225.444] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 225.444] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 225.444] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 225.444] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 225.444] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 225.444] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 225.445] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 225.445] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 225.445] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 225.445] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 225.445] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 225.445] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 225.445] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 225.445] (II) modeset(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 225.445] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 225.445] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 225.445] (II) modeset(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 225.445] (II) modeset(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 225.446] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 225.446] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 225.446] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 225.446] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 225.446] (II) modeset(0): Output HDMI-1 connected
[ 225.446] (II) modeset(0): Using exact sizes for initial modes
[ 225.446] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0
[ 225.446] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 225.446] (==) modeset(0): DPI set to (96, 96)
[ 225.446] (II) Loading sub module "fb"
[ 225.446] (II) LoadModule: "fb"
[ 225.446] (II) Module "fb" already built-in
[ 225.729] (==) modeset(0): Backing store enabled
[ 225.729] (==) modeset(0): Silken mouse enabled
[ 225.853] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 225.854] (==) modeset(0): DPMS enabled
[ 225.854] (II) modeset(0): [DRI2] Setup complete
[ 225.854] (II) modeset(0): [DRI2] DRI driver: vc4
[ 225.854] (II) modeset(0): [DRI2] VDPAU driver: vc4
[ 225.854] (II) Initializing extension Generic Event Extension
[ 225.856] (II) Initializing extension SHAPE
[ 225.858] (II) Initializing extension MIT-SHM
[ 225.860] (II) Initializing extension XInputExtension
[ 225.866] (II) Initializing extension XTEST
[ 225.867] (II) Initializing extension BIG-REQUESTS
[ 225.869] (II) Initializing extension SYNC
[ 225.871] (II) Initializing extension XKEYBOARD
[ 225.873] (II) Initializing extension XC-MISC
[ 225.875] (II) Initializing extension SECURITY
[ 225.876] (II) Initializing extension XFIXES
[ 225.878] (II) Initializing extension RENDER
[ 225.880] (II) Initializing extension RANDR
[ 225.884] (II) Initializing extension COMPOSITE
[ 225.885] (II) Initializing extension DAMAGE
[ 225.887] (II) Initializing extension MIT-SCREEN-SAVER
[ 225.889] (II) Initializing extension DOUBLE-BUFFER
[ 225.891] (II) Initializing extension RECORD
[ 225.892] (II) Initializing extension DPMS
[ 225.894] (II) Initializing extension Present
[ 225.896] (II) Initializing extension DRI3
[ 225.898] (II) Initializing extension X-Resource
[ 225.899] (II) Initializing extension XVideo
[ 225.901] (II) Initializing extension XVideo-MotionCompensation
[ 225.901] (II) Initializing extension GLX
[ 225.936] (II) AIGLX: Loaded and initialized vc4
[ 225.936] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 225.936] (II) Initializing extension XFree86-VidModeExtension
[ 225.937] (II) Initializing extension XFree86-DGA
[ 225.938] (II) Initializing extension XFree86-DRI
[ 225.938] (II) Initializing extension DRI2
[ 225.949] (II) modeset(0): Damage tracking initialized
[ 225.949] (II) modeset(0): Setting screen physical size to 508 x 285
[ 226.531] (II) config/udev: Adding input device Keyboard K380 Keyboard (/dev/input/event0)
[ 226.531] (**) Keyboard K380 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 226.531] (II) LoadModule: "libinput"
[ 226.531] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 226.553] (II) Module libinput: vendor="X.Org Foundation"
[ 226.553] compiled for 1.21.1.3, module version = 1.2.1
[ 226.553] Module class: X.Org XInput Driver
[ 226.553] ABI class: X.Org XInput driver, version 24.4
[ 226.553] (II) Using input driver 'libinput' for 'Keyboard K380 Keyboard'
[ 226.556] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[ 226.556] (**) Keyboard K380 Keyboard: always reports core events
[ 226.556] (**) Option "Device" "/dev/input/event0"
[ 226.585] (II) event0 - Keyboard K380 Keyboard: is tagged by udev as: Keyboard
[ 226.585] (II) event0 - Keyboard K380 Keyboard: device is a keyboard
[ 226.587] (II) event0 - Keyboard K380 Keyboard: device removed
[ 226.587] (**) Option "config_info" "udev:/sys/devices/platform/soc/3f201000.serial/serial0/serial0-0/bluetooth/hci0/hci0:11/0005:046D:B342.0001/input/input0/event0"
[ 226.587] (II) XINPUT: Adding extended input device "Keyboard K380 Keyboard" (type: KEYBOARD, id 6)
[ 226.594] (II) event0 - Keyboard K380 Keyboard: is tagged by udev as: Keyboard
[ 226.595] (II) event0 - Keyboard K380 Keyboard: device is a keyboard
[ 226.602] (II) config/udev: Adding input device M720 Triathlon Keyboard (/dev/input/event1)
[ 226.602] (**) M720 Triathlon Keyboard: Applying InputClass "libinput keyboard catchall"
[ 226.602] (II) Using input driver 'libinput' for 'M720 Triathlon Keyboard'
[ 226.604] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[ 226.605] (**) M720 Triathlon Keyboard: always reports core events
[ 226.605] (**) Option "Device" "/dev/input/event1"
[ 226.608] (II) event1 - M720 Triathlon Keyboard: is tagged by udev as: Keyboard
[ 226.609] (II) event1 - M720 Triathlon Keyboard: device is a keyboard
[ 226.610] (II) event1 - M720 Triathlon Keyboard: device removed
[ 226.610] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B015.0002/input/input3/event1"
[ 226.610] (II) XINPUT: Adding extended input device "M720 Triathlon Keyboard" (type: KEYBOARD, id 7)
[ 226.614] (II) event1 - M720 Triathlon Keyboard: is tagged by udev as: Keyboard
[ 226.615] (II) event1 - M720 Triathlon Keyboard: device is a keyboard
[ 226.618] (II) config/udev: Adding input device M720 Triathlon Mouse (/dev/input/event2)
[ 226.618] (**) M720 Triathlon Mouse: Applying InputClass "libinput pointer catchall"
[ 226.618] (II) Using input driver 'libinput' for 'M720 Triathlon Mouse'
[ 226.621] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28 paused 0
[ 226.621] (**) M720 Triathlon Mouse: always reports core events
[ 226.621] (**) Option "Device" "/dev/input/event2"
[ 226.624] (II) event2 - M720 Triathlon Mouse: is tagged by udev as: Mouse
[ 226.625] (II) event2 - M720 Triathlon Mouse: device is a pointer
[ 226.625] (II) event2 - M720 Triathlon Mouse: device removed
[ 226.626] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B015.0002/input/input4/event2"
[ 226.626] (II) XINPUT: Adding extended input device "M720 Triathlon Mouse" (type: MOUSE, id 8)
[ 226.626] (**) Option "AccelerationScheme" "none"
[ 226.626] (**) M720 Triathlon Mouse: (accel) selected scheme none/0
[ 226.626] (**) M720 Triathlon Mouse: (accel) acceleration factor: 2.000
[ 226.626] (**) M720 Triathlon Mouse: (accel) acceleration threshold: 4
[ 226.630] (II) event2 - M720 Triathlon Mouse: is tagged by udev as: Mouse
[ 226.631] (II) event2 - M720 Triathlon Mouse: device is a pointer
[ 226.633] (II) config/udev: Adding input device M720 Triathlon Mouse (/dev/input/mouse0)
[ 226.633] (II) No input driver specified, ignoring this device.
[ 226.633] (II) This device may have been added with another device file.
[ 227.208] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 235.169] (II) modeset(0): EDID vendor "DEL", prod id 53510
[ 235.170] (II) modeset(0): Using EDID range info for horizontal sync
[ 235.170] (II) modeset(0): Using EDID range info for vertical refresh
[ 235.170] (II) modeset(0): Printing DDC gathered Modelines:
[ 235.170] (II) modeset(0): Modeline "3840x2160"x0.0 594.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync -vsync (135.0 kHz eP)
[ 235.170] (II) modeset(0): Modeline "2560x1440"x0.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e)
[ 235.170] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 235.170] (II) modeset(0): Modeline "3840x2160"x0.0 442.00 3840 3888 3936 4000 2160 2163 2168 2211 +hsync -vsync (110.5 kHz e)
[ 235.170] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 235.170] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 235.170] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 235.170] (II) modeset(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 235.170] (II) modeset(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 235.170] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 235.171] (II) modeset(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 235.171] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 235.171] (II) modeset(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 235.171] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 235.171] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 235.171] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 235.171] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 235.171] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 235.171] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 235.171] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 235.171] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 235.171] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 235.171] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 235.171] (II) modeset(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 235.172] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 235.172] (II) modeset(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 235.172] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 235.173] (--) modeset(0): HDMI max TMDS frequency 300000KHz
')

with or without installing xf86-video-fbdev, the result is the same black screen.

Any ideas on what I am missing?

Thanks
unbekannt
 
Posts: 2
Joined: Fri May 06, 2022 4:05 pm

Re: rpi3b+ no HDMI output

Postby df8oe » Mon Jun 20, 2022 12:24 pm

Here too no HDMI output on RPI3b+ - but only for graphical output (Xorg). Booting runs fine with HDMI output, but when xservers starts screen goes black and thats all. Xorg log is different than yours - here driver switches from fbdev to fbdevhw, and then "no screens are found". I have not touched Xorg config which resides in /usr/share/X11/xorg.conf.d/

No idea what is broken here.
df8oe
 
Posts: 60
Joined: Fri Oct 01, 2021 5:10 pm

Re: rpi3b+ no HDMI output

Postby robg » Tue Jun 21, 2022 9:12 am

Do you have the framebuffer driver enabled (please post the output of `pacman -Qs fbdev`)? If so, disable it; it is known to misbehave with the (now default) kms driver on RPI. Moreover, development of fbdev has stopped a long time ago.
robg
 
Posts: 186
Joined: Tue Jan 05, 2021 8:22 am

Re: rpi3b+ no HDMI output

Postby unbekannt » Wed Jul 20, 2022 2:35 pm

In my case, with or without the fbdev package the results is the same, as I mentioned in the description.
unbekannt
 
Posts: 2
Joined: Fri May 06, 2022 4:05 pm

Re: rpi3b+ no HDMI output

Postby tsbarnes » Mon Sep 05, 2022 6:23 pm

Have you tried using vc4-fkms-v3d instead of vc4-kms-v3d?

That helped on my RPi3B+
tsbarnes
 
Posts: 6
Joined: Tue Oct 12, 2021 3:45 pm


Return to ARMv7h

Who is online

Users browsing this forum: No registered users and 4 guests