Internal error: Oops: 17 [#1] SMP ARM. Cubox-i4

[GAZ082]

I BELIEVE this is related to high traffic through my WIFI dongle which is connected via a usb host. The thing is this never happened before i made a fresh install.

Tried to copy everything i could from the serial screen:

$this->bbcode_second_pass_code('', '[ 399.570799] 9e80: dc23f018 00007303 00000d21 dc09b800 dc8dd20c f0cfd270 00002270 8088cb64
[ 399.578996] 9ea0: ddb38000 0000000a 00000000 ddb39ec0 804a25f8 80845358 600f0013 ffffffff
[ 399.587199] [<80845b00>] (__irq_svc) from [<80845358>] (_raw_spin_unlock_irqrestore+0x1c/0x20)
[ 399.595841] [<80845358>] (_raw_spin_unlock_irqrestore) from [<804a25f8>] (uart_write_room+0x30/0x38)
[ 399.605011] [<804a25f8>] (uart_write_room) from [<8048b920>] (n_tty_write+0x1f0/0x4c4)
[ 399.612954] [<8048b920>] (n_tty_write) from [<804886bc>] (tty_write+0x170/0x29c)
[ 399.620377] [<804886bc>] (tty_write) from [<8010b624>] (vfs_write+0xa8/0x1b8)
[ 399.627538] [<8010b624>] (vfs_write) from [<8010bcc8>] (SyS_write+0x3c/0x90)
[ 399.634611] [<8010bcc8>] (SyS_write) from [<8000e280>] (ret_fast_syscall+0x0/0x38)
address 00000004
[ 398.767043] pgd = 80004000
[ 398.767118] [00000004] *pgd=00000000
[ 398.767156] Internal error: Oops: 17 [#1] SMP ARM
[ 398.771886] Modules linked in: ip6t_REJECT xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 xt_LOG 8188eu(O) caam_jr ir_mce_kbd_decoder ir_sanyo_decoder caam galcore gpio_ir_recv xt_limit xt_addrtype nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack sch_fq_codel ir_sony_decoder ir_rc6_decoder ir_rc5_sz_decoder ir_rc5_decoder ir_nec_decoder ir_jvc_decoder ir_lirc_codec lirc_dev
')


http://imgur.com/a/qBtnD

Since i made a fresh install all hell broke upon me. I've never had this kind of problems before, it's frustrating to the core.

Sorry, i had to vent.

[GAZ082]

I can confirm is somethig related with wifi and high traffic. Disabled Transmission and been runnig for half an hour with no issues whereas with transmission on it lasted barely 5 minutes.

[GAZ082]

Installed 8188EU drivers, not from the master repo which is used in the package, but from the 4.8 branch and seems to have solved the problem.