by GAZ082 » Mon May 22, 2017 1:23 am
1. Installed again the kernel, but "uname -r" shows the -1 version, not the -3
2. No modules loaded.
3. did a file *:
[root@kraken boot]# file * of /boot
$this->bbcode_second_pass_code('', 'SPL: data
boot.scr: u-boot legacy uImage, U-Boot boot script, Linux/ARM, Script File (Not compressed), 762 bytes, Wed Feb 1 01:18:00 2017, Load Address: 0x00000000, Entry Point: 0x00000000, Header CRC: 0x7CC8617A, Data CRC: 0x17571996
boot.scr2: u-boot legacy uImage, U-Boot boot script, Linux/ARM, Script File (Not compressed), 673 bytes, Sat Feb 11 04:02:48 2017, Load Address: 0x00000000, Entry Point: 0x00000000, Header CRC: 0x078C3CB8, Data CRC: 0x928FCE00
boot.txt: ASCII text
boot.txt2: ASCII text
dtbs: directory
mkscr: Bourne-Again shell script, ASCII text executable
u-boot.img: u-boot legacy uImage, U-Boot 2017.01 for mx6cuboxi boa\270, Firmware/ARM, Firmware Image (Not compressed), 303888 bytes, Sat Feb 11 04:02:46 2017, Load Address: 0x17800000, Entry Point: 0x00000000, Header CRC: 0x069796B4, Data CRC: 0x16DF1F8D
uEnv.txt: ASCII text
zImage: Linux kernel ARM boot executable zImage (little-endian)')