BeagleBone Black kernel panic after upgrade.

[nsollars]

Hi all,

So after doing a pacman -Syu here is the result of the boot, hopefully this can get fixed soon.

--

U-Boot SPL 2017.07-1 (Sep 02 2017 - 21:04:29)
Trying to boot from MMC1


U-Boot 2017.07-1 (Sep 02 2017 - 21:04:29 +0000) Arch Linux ARM

CPU : AM335X-GP rev 2.0
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

<ethaddr> not set. Validating first E-fuse MAC
Net: cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
gpio: pin 54 (gpio 54) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 56 (gpio 56) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** File not found boot.scr **
** Unrecognized filesystem type **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
829 bytes read in 28 ms (28.3 KiB/s)
## Executing script at 80000000
5744088 bytes read in 384 ms (14.3 MiB/s)
gpio: pin 54 (gpio 54) value is 1
fdt: am335x-boneblack.dtb
54949 bytes read in 43 ms (1.2 MiB/s)
gpio: pin 55 (gpio 55) value is 1
4945273 bytes read in 349 ms (13.5 MiB/s)
gpio: pin 56 (gpio 56) value is 1
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fb48000, end 8ffff579 ... OK
Loading Device Tree to 8fb37000, end 8fb476a4 ... OK

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] random: get_random_bytes called from start_kernel+0x31/0x34a wit0
[ 0.000000] Linux version 4.13.1-1-ARCH (builduser@leming) (gcc version 7.2.7
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 48 MiB at 0x9d000000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.0 (sgx neon)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa0
[ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 root=PAt
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 451024K/524288K available (7168K kernel code, 972K rwdat)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB)
[ 0.000000] .data : 0xc0d00000 - 0xc0df3270 ( 973 kB)
[ 0.000000] .bss : 0xc0dfc83c - 0xc0e92974 ( 601 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 35962 entries in 71 pages
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrus
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 8947s
[ 0.000028] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, mas
[ 0.000038] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000547] timer_probe: no matching timers found
[ 0.000689] Console: colour dummy device 80x30
[ 0.001140] console [tty0] enabled
[ 0.001169] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.001189] This ensures that you still see kernel messages. Please
[ 0.001206] update your kernel commandline.
[ 0.001234] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.019292] pid_max: default: 32768 minimum: 301
[ 0.019517] Security Framework initialized
[ 0.019710] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.019738] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.020445] CPU: Testing write buffer coherency: ok
[ 0.021040] Setting up static identity map for 0x80100000 - 0x80100054
[ 0.024713] devtmpfs: initialized
[ 0.036764] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3
[ 0.037149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.037196] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.040607] xor: measuring software checksum speed
[ 0.079262] arm4regs : 1223.000 MB/sec
[ 0.119259] 8regs : 1095.000 MB/sec
[ 0.159258] 32regs : 1135.000 MB/sec
[ 0.199259] neon : 1772.000 MB/sec
[ 0.199278] xor: using function: neon (1772.000 MB/sec)
[ 0.199306] pinctrl core: initialized pinctrl subsystem
[ 0.200284] NET: Registered protocol family 16
[ 0.202281] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.213959] omap_hwmod: debugss: _wait_target_disable failed
[ 0.266423] cpuidle: using governor menu
[ 0.271370] OMAP GPIO hardware version 0.1
[ 0.283379] No ATAGs?
[ 0.283395] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.359462] raid6: int32x1 gen() 259 MB/s
[ 0.427294] raid6: int32x1 xor() 236 MB/s
[ 0.495279] raid6: int32x2 gen() 384 MB/s
[ 0.563314] raid6: int32x2 xor() 292 MB/s
[ 0.631365] raid6: int32x4 gen() 418 MB/s
[ 0.699275] raid6: int32x4 xor() 273 MB/s
[ 0.767404] raid6: int32x8 gen() 367 MB/s
[ 0.835268] raid6: int32x8 xor() 251 MB/s
[ 0.903270] raid6: neonx1 gen() 1456 MB/s
[ 0.971265] raid6: neonx1 xor() 847 MB/s
[ 1.023256] random: fast init done
[ 1.039278] raid6: neonx2 gen() 1924 MB/s
[ 1.107259] raid6: neonx2 xor() 1183 MB/s
[ 1.175302] raid6: neonx4 gen() 1233 MB/s
[ 1.243290] raid6: neonx4 xor() 880 MB/s
[ 1.311296] raid6: neonx8 gen() 872 MB/s
[ 1.379285] raid6: neonx8 xor() 622 MB/s
[ 1.379303] raid6: using algorithm neonx2 gen() 1924 MB/s
[ 1.379322] raid6: .... xor() 1183 MB/s, rmw enabled
[ 1.379340] raid6: using intx1 recovery algorithm
[ 1.385927] edma 49000000.edma: TI EDMA DMA engine driver
[ 1.389160] SCSI subsystem initialized
[ 1.389726] usbcore: registered new interface driver usbfs
[ 1.389808] usbcore: registered new interface driver hub
[ 1.389889] usbcore: registered new device driver usb
[ 1.390287] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_we
[ 1.390357] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_we
[ 1.390469] media: Linux media interface: v0.10
[ 1.390525] Linux video capture interface: v2.00
[ 1.390603] pps_core: LinuxPPS API ver. 1 registered
[ 1.390623] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
[ 1.390666] PTP clock support registered
[ 1.391109] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 1.392108] NetLabel: Initializing
[ 1.392141] NetLabel: domain hash size = 128
[ 1.392158] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.392236] NetLabel: unlabeled traffic allowed by default
[ 1.392796] clocksource: Switched to clocksource timer1
[ 1.499724] VFS: Disk quotas dquot_6.6.0
[ 1.499842] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.509502] NET: Registered protocol family 2
[ 1.510174] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.510239] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.510291] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.510389] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.510419] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.510567] NET: Registered protocol family 1
[ 1.511013] RPC: Registered named UNIX socket transport module.
[ 1.511042] RPC: Registered udp transport module.
[ 1.511060] RPC: Registered tcp transport module.
[ 1.511078] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.511523] Unpacking initramfs...
[ 1.834241] Freeing initrd memory: 4832K
[ 1.834719] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 1.834854] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 countee
[ 1.837418] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 1.844408] zbud: loaded
[ 1.846914] NFS: Registering the id_resolver key type
[ 1.846973] Key type id_resolver registered
[ 1.846992] Key type id_legacy registered
[ 1.847019] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.847270] fuse init (API version 7.26)
[ 1.847841] SGI XFS with ACLs, security attributes, realtime, no debug enabld
[ 1.854429] Key type asymmetric registered
[ 1.854472] Asymmetric key parser 'x509' registered
[ 1.854554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 1.854724] io scheduler noop registered
[ 1.854746] io scheduler deadline registered
[ 1.855053] io scheduler cfq registered (default)
[ 1.855076] io scheduler mq-deadline registered
[ 1.855094] io scheduler kyber registered
[ 1.856103] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 1.857794] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 1.858643] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.860672] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud 0
[ 2.649585] console [ttyS0] enabled
[ 2.656343] libphy: Fixed MDIO Bus: probed
[ 2.712854] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 2.719030] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 2.725603] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 2.733783] Internal error: Oops - undefined instruction: 0 [#1] THUMB2
[ 2.740462] Modules linked in:
[ 2.743545] CPU: 0 PID: 55 Comm: modprobe Not tainted 4.13.1-1-ARCH #1
[ 2.750110] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 2.756239] task: dad28000 task.stack: dad2e000
[ 2.760814] PC is at ret_fast_syscall+0x2/0x4c
[ 2.765294] LR is at SyS_brk+0x119/0x148
[ 2.769240] pc : [<c0106b62>] lr : [<c01f3625>] psr: 60000013
[ 2.775542] sp : dad2ffa8 ip : 50c5387d fp : 00001000
[ 2.780796] r10: 00000000 r9 : dad2e000 r8 : c0106d24
[ 2.786052] r7 : 0000002d r6 : b6fa6cf8 r5 : 00010034 r4 : 00000009
[ 2.792618] r3 : cdf2e59f r2 : cdf2e59f r1 : 00000000 r0 : 00ea4000
[ 2.799185] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 2.806362] Control: 50c5387d Table: 9ad30019 DAC: 00000051
[ 2.812140] Process modprobe (pid: 55, stack limit = 0xdad2e210)
[ 2.818182] Stack: (0xdad2ffa8 to 0xdad30000)
[ 2.822570] ffa0: 00000009 00010034 00000000 00000050 00001
[ 2.830805] ffc0: 00000009 00010034 b6fa6cf8 0000002d 00000001 00000001 00000
[ 2.839041] ffe0: 00011ec8 bef80dec b6fbcbb0 b6fbdfa8 60000010 00000000 72000
[ 2.847287] Code: bfcc2807 20012000 0000bd08 b6720000 (1000f8d9)
[ 2.853422] ---[ end trace 68cf3b52e9215c44 ]---
[ 2.858696] libphy: 4a101000.mdio: probed
[ 2.862791] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, dri0
[ 2.872616] cpsw 4a100000.ethernet: Detected MACID = 90:59:af:5c:dd:cc
[ 2.879327] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffie)
[ 2.888244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.894908] ehci-platform: EHCI generic platform driver
[ 2.900321] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.905950] usbcore: registered new interface driver uas
[ 2.911373] usbcore: registered new interface driver usb-storage
[ 2.917457] usbcore: registered new interface driver ums-cypress
[ 2.925398] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc r
[ 2.937036] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc r
[ 2.957535] mousedev: PS/2 mouse device common for all mice
[ 2.964731] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 2.972453] i2c /dev entries driver
[ 2.977362] sdhci: Secure Digital Host Controller Interface driver
[ 2.983633] sdhci: Copyright(c) Pierre Ossman
[ 2.988433] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.067928] mmc0: host does not support reading read-only switch, assuming we
[ 3.076232] Synopsys Designware Multimedia Card Interface Driver
[ 3.082692] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.088576] mmc0: new high speed SDXC card at address 0007
[ 3.098135] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.104765] mmcblk0: mmc0:0007 SD64G 58.2 GiB
[ 3.109422] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.116065] usbcore: registered new interface driver usbhid
[ 3.121761] usbhid: USB HID core driver
[ 3.125779] mmcblk0: p1
[ 3.132612] remoteproc remoteproc0: wkup_m3 is available
[ 3.139521] NET: Registered protocol family 10
[ 3.145977] Internal error: Oops - undefined instruction: 0 [#2] THUMB2
[ 3.152665] Modules linked in:
[ 3.155748] CPU: 0 PID: 61 Comm: modprobe Tainted: G D 4.13.1-11
[ 3.163543] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 3.169672] task: dad292c0 task.stack: dadc6000
[ 3.174246] PC is at ret_fast_syscall+0x2/0x4c
[ 3.178727] LR is at SyS_brk+0x119/0x148
[ 3.182675] pc : [<c0106b62>] lr : [<c01f3625>] psr: 60000013
[ 3.188977] sp : dadc7fa8 ip : 50c5387d fp : 00001000
[ 3.194232] r10: 00000000 r9 : dadc6000 r8 : c0106d24
[ 3.199488] r7 : 0000002d r6 : b6ee5cf8 r5 : 00010034 r4 : 00000009
[ 3.206053] r3 : 47c79245 r2 : 47c79245 r1 : 00000000 r0 : 017ed000
[ 3.212619] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.219796] Control: 50c5387d Table: 9adcc019 DAC: 00000051
[ 3.225575] Process modprobe (pid: 61, stack limit = 0xdadc6210)
[ 3.231617] Stack: (0xdadc7fa8 to 0xdadc8000)
[ 3.236005] 7fa0: 00000009 00010034 00000000 00000050 00001
[ 3.244240] 7fc0: 00000009 00010034 b6ee5cf8 0000002d 00000001 00000001 00000
[ 3.252475] 7fe0: 00011ec8 be818dfc b6efbbb0 b6efcfa8 60000010 00000000 00000
[ 3.260718] Code: bfcc2807 20012000 0000bd08 b6720000 (1000f8d9)
[ 3.266850] ---[ end trace 68cf3b52e9215c45 ]---
[ 3.272588] Internal error: Oops - undefined instruction: 0 [#3] THUMB2
[ 3.279264] Modules linked in:
[ 3.282344] CPU: 0 PID: 62 Comm: modprobe Tainted: G D 4.13.1-11
[ 3.290138] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 3.296267] task: dad292c0 task.stack: dadc6000
[ 3.300835] PC is at ret_fast_syscall+0x2/0x4c
[ 3.305310] LR is at SyS_brk+0x119/0x148
[ 3.309255] pc : [<c0106b62>] lr : [<c01f3625>] psr: 60000013
[ 3.315557] sp : dadc7fa8 ip : 50c5387d fp : 00001000
[ 3.320812] r10: 00000000 r9 : dadc6000 r8 : c0106d24
[ 3.326068] r7 : 0000002d r6 : b6f0ecf8 r5 : 00010034 r4 : 00000009
[ 3.332634] r3 : 1755d2d4 r2 : 1755d2d4 r1 : 00000000 r0 : 01764000
[ 3.339201] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.346377] Control: 50c5387d Table: 9ad30019 DAC: 00000051
[ 3.352155] Process modprobe (pid: 62, stack limit = 0xdadc6210)
[ 3.358196] Stack: (0xdadc7fa8 to 0xdadc8000)
[ 3.362584] 7fa0: 00000009 00010034 00000000 00000050 00001
[ 3.370819] 7fc0: 00000009 00010034 b6f0ecf8 0000002d 00000001 00000001 00000
[ 3.379054] 7fe0: 00011ec8 be957dfc b6f24bb0 b6f25fa8 60000010 00000000 00000
[ 3.387293] Code: bfcc2807 20012000 0000bd08 b6720000 (1000f8d9)
[ 3.393424] ---[ end trace 68cf3b52e9215c46 ]---
[ 3.399266] Internal error: Oops - undefined instruction: 0 [#4] THUMB2
[ 3.405941] Modules linked in:
[ 3.409022] CPU: 0 PID: 65 Comm: modprobe Tainted: G D 4.13.1-11
[ 3.416816] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 3.422946] task: dad2b200 task.stack: dadce000
[ 3.427514] PC is at ret_fast_syscall+0x2/0x4c
[ 3.431989] LR is at SyS_brk+0x119/0x148
[ 3.435934] pc : [<c0106b62>] lr : [<c01f3625>] psr: 60000013
[ 3.442237] sp : dadcffa8 ip : 50c5387d fp : 00001000
[ 3.447493] r10: 00000000 r9 : dadce000 r8 : c0106d24
[ 3.452749] r7 : 0000002d r6 : b6f10cf8 r5 : 00010034 r4 : 00000009
[ 3.459313] r3 : 247d7eb2 r2 : 247d7eb2 r1 : 00000000 r0 : 01bb7000
[ 3.465880] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.473056] Control: 50c5387d Table: 9add8019 DAC: 00000051
[ 3.478834] Process modprobe (pid: 65, stack limit = 0xdadce210)
[ 3.484875] Stack: (0xdadcffa8 to 0xdadd0000)
[ 3.489262] ffa0: 00000009 00010034 00000000 00000050 00001
[ 3.497497] ffc0: 00000009 00010034 b6f10cf8 0000002d 00000001 00000001 00000
[ 3.505733] ffe0: 00011ec8 beedcdfc b6f26bb0 b6f27fa8 60000010 00000000 9cfe1
[ 3.513971] Code: bfcc2807 20012000 0000bd08 b6720000 (1000f8d9)
[ 3.520104] ---[ end trace 68cf3b52e9215c47 ]---
[ 3.525642] Internal error: Oops - undefined instruction: 0 [#5] THUMB2
[ 3.532314] Modules linked in:
[ 3.535395] CPU: 0 PID: 66 Comm: modprobe Tainted: G D 4.13.1-11
[ 3.543189] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 3.549317] task: dad2b200 task.stack: dadc6000
[ 3.553883] PC is at ret_fast_syscall+0x2/0x4c
[ 3.558358] LR is at SyS_brk+0x119/0x148
[ 3.562303] pc : [<c0106b62>] lr : [<c01f3625>] psr: 60000013
[ 3.568606] sp : dadc7fa8 ip : 50c5387d fp : 00001000
[ 3.573861] r10: 00000000 r9 : dadc6000 r8 : c0106d24
[ 3.579117] r7 : 0000002d r6 : b6fa0cf8 r5 : 00010034 r4 : 00000009
[ 3.585682] r3 : 3cb0fc3e r2 : 3cb0fc3e r1 : 00000000 r0 : 009e0000
[ 3.592248] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.599424] Control: 50c5387d Table: 9adcc019 DAC: 00000051
[ 3.605203] Process modprobe (pid: 66, stack limit = 0xdadc6210)
[ 3.611243] Stack: (0xdadc7fa8 to 0xdadc8000)
[ 3.615630] 7fa0: 00000009 00010034 00000000 00000050 00001
[ 3.623866] 7fc0: 00000009 00010034 b6fa0cf8 0000002d 00000001 00000001 00000
[ 3.632102] 7fe0: 00011ec8 bedffdec b6fb6bb0 b6fb7fa8 60000010 00000000 00000
[ 3.640341] Code: bfcc2807 20012000 0000bd08 b6720000 (1000f8d9)
[ 3.646471] ---[ end trace 68cf3b52e9215c48 ]---
[ 3.651576] Segment Routing with IPv6
[ 3.655511] mip6: Mobile IPv6
[ 3.658569] NET: Registered protocol family 17
[ 3.663094] mmc1: new high speed MMC card at address 0001
[ 3.668631] Key type dns_resolver registered
[ 3.672947] mpls_gso: MPLS GSO support
[ 3.676868] omap_voltage_late_init: Voltage driver support not added
[ 3.683786] mmcblk1: mmc1:0001 MMC02G 1.79 GiB
[ 3.688542] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[ 3.694748] ThumbEE CPU extension supported.
[ 3.699109] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[ 3.705091] Registering SWP/SWPB emulation handler
[ 3.710074] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB
[ 3.716465] registered taskstats version 1
[ 3.721307] zswap: loaded using pool lzo/zbud
[ 3.729410] Btrfs loaded, crc32c=crc32c-generic
[ 3.772325] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i20
[ 3.783581] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.789316] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.919034] tda998x 0-0070: found TDA19988
[ 3.924177] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ 3.930265] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.936931] [drm] No driver support for vblank timestamp query.
[ 3.943126] [drm] Cannot find any crtc or sizes - going 1024x768
[ 3.962398] Console: switching to colour frame buffer device 128x48
[ 3.974674] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 3.980842] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on min0
[ 3.988453] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.995488] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 4.002848] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 4.010127] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 4.017420] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 4.024453] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 4.030985] remoteproc remoteproc0: powering up wkup_m3
[ 4.036399] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf,8
[ 4.044913] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 4.051562] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[ 4.063069] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,0A5C,2313BBBK258'
[ 4.070453] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-bl4
[ 4.105720] bone_capemgr bone_capemgr: slot #0: No cape found
[ 4.137795] bone_capemgr bone_capemgr: slot #1: No cape found
[ 4.169856] bone_capemgr bone_capemgr: slot #2: No cape found
[ 4.201926] bone_capemgr bone_capemgr: slot #3: No cape found
[ 4.210367] bone_capemgr bone_capemgr: initialized OK.
[ 4.218494] genirq: Flags mismatch irq 188. 00002000 (vbus) vs. 00000000 (tp)
[ 4.229791] musb-dsps: probe of 47401400.usb failed with error -16
[ 4.242569] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 4.250565] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus numb1
[ 4.260763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.270219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 4.280083] usb usb1: Product: MUSB HDRC host driver
[ 4.287659] usb usb1: Manufacturer: Linux 4.13.1-1-ARCH musb-hcd
[ 4.296309] usb usb1: SerialNumber: musb-hdrc.1
[ 4.304135] hub 1-0:1.0: USB hub found
[ 4.310572] hub 1-0:1.0: 1 port detected
[ 4.317883] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:)
[ 4.329240] of_cfs_init
[ 4.334368] of_cfs_init: OK
[ 4.340178] PM: Hibernation image not present or could not be loaded.
[ 4.351939] Freeing unused kernel memory: 1024K
[ 4.360268] Internal error: Oops - undefined instruction: 0 [#6] THUMB2
[ 4.369584] Modules linked in:
[ 4.375237] CPU: 0 PID: 1 Comm: init Tainted: G D 4.13.1-1-ARCH1
[ 4.385196] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 4.393924] task: dc104640 task.stack: dc108000
[ 4.401070] PC is at ret_fast_syscall+0x2/0x4c
[ 4.408103] LR is at SyS_brk+0x119/0x148
[ 4.414543] pc : [<c0106b62>] lr : [<c01f3625>] psr: 60000013
[ 4.423383] sp : dc109fa8 ip : 50c5387d fp : 00001000
[ 4.431152] r10: 00000000 r9 : dc108000 r8 : c0106d24
[ 4.438912] r7 : 0000002d r6 : b6f1acf8 r5 : 00010034 r4 : 00000009
[ 4.447987] r3 : 64531681 r2 : 64531681 r1 : 00000000 r0 : 0029b000
[ 4.457045] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 4.466726] Control: 50c5387d Table: 9aed4019 DAC: 00000051
[ 4.474983] Process init (pid: 1, stack limit = 0xdc108210)
[ 4.483064] Stack: (0xdc109fa8 to 0xdc10a000)
[ 4.489889] 9fa0: 00000009 00010034 00000000 00000054 00001
[ 4.500656] 9fc0: 00000009 00010034 b6f1acf8 0000002d 00000001 00000001 00000
[ 4.511469] 9fe0: 00015560 bed6ee4c b6f30bb0 b6f31fa8 60000010 00000000 d7bd5
[ 4.522337] Code: bfcc2807 20012000 0000bd08 b6720000 (1000f8d9)
[ 4.531103] ---[ end trace 68cf3b52e9215c4a ]---
[ 4.538829] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0b
[ 4.538829]
[ 4.553352] ---[ end Kernel panic - not syncing: Attempted to kill init! exib
[ 4.553352]

[bulletmark]

I got the same problem. If you look at my posts here there have been a number of boot issues with kernel updates in recent times for the BB so I have given up and replaced it with my old version 1 Raspberry Pi. Slow as heck but at least the updates are reliable.

[summers]

Odd. Mine is booting fine on 4.13.4-1

And even better, with the device tree blob - its setting up the usb gadget ethernet correctly - so I can login in over the usb cable.

[bulletmark]

@summers, that kernel you tested is 4 changes after the change that broke things which is https://archlinuxarm.org/packages/armv7 ... deeca22826. Presumably the bug has been fixed since then.

[summers]

Interesting - perhaps that means the problem is *SOLVED* ...