Hey Guys,
I just updated my BeagleBone Black to the latest stuff. Was pretty outdated. Went from 4.14.8 to 4.19.10. However theres an issue. A kernel panic on boot time now.
$this->bbcode_second_pass_code('', '
[ 13.209110] l4_per_cm:clk:00d4:0: failed to enable
[ 13.209135] ------------[ cut here ]------------
[ 13.209176] WARNING: CPU: 0 PID: 197 at drivers/clk/clk.c:828 clk_core_disable+0x21c/0x290
[ 13.209181] l4_per_cm:clk:00d4:0 already disabled
[ 13.209185] Modules linked in: pruss_soc_bus(+) evdev joydev tps65218_pwrbutton uio_pdrv_genirq uio sch_fq_codel usb_f_ecm g_ether usb_f_rndis u_ether libcomposite ip_tables x_tables hid_logitech_hidpp hid_logitech_dj
[ 13.209255] CPU: 0 PID: 197 Comm: systemd-udevd Not tainted 4.19.10-1-ARCH #1
[ 13.209260] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 13.209294] [<c0111e10>] (unwind_backtrace) from [<c010e2f0>] (show_stack+0x20/0x24)
[ 13.209319] [<c010e2f0>] (show_stack) from [<c0c512ac>] (dump_stack+0x24/0x28)
[ 13.209335] [<c0c512ac>] (dump_stack) from [<c0135d4c>] (__warn.part.3+0xcc/0xe4)
[ 13.209346] [<c0135d4c>] (__warn.part.3) from [<c0135ddc>] (warn_slowpath_fmt+0x78/0x94)
[ 13.209358] [<c0135ddc>] (warn_slowpath_fmt) from [<c07c55d0>] (clk_core_disable+0x21c/0x290)
[ 13.209372] [<c07c55d0>] (clk_core_disable) from [<c07c64f4>] (clk_core_disable_lock+0x28/0x34)
[ 13.209384] [<c07c64f4>] (clk_core_disable_lock) from [<c07c652c>] (clk_disable+0x2c/0x30)
[ 13.209401] [<c07c652c>] (clk_disable) from [<c0124940>] (_disable_clocks+0x2c/0xc0)
[ 13.209415] [<c0124940>] (_disable_clocks) from [<c0127684>] (omap_hwmod_deassert_hardreset+0xe0/0x1ac)
[ 13.209429] [<c0127684>] (omap_hwmod_deassert_hardreset) from [<c012848c>] (omap_device_deassert_hardreset+0x44/0x60)
[ 13.209455] [<c012848c>] (omap_device_deassert_hardreset) from [<bf0ec24c>] (pruss_soc_bus_probe+0xbc/0x238 [pruss_soc_bus])
[ 13.209489] [<bf0ec24c>] (pruss_soc_bus_probe [pruss_soc_bus]) from [<c0892664>] (platform_drv_probe+0x58/0xa8)
[ 13.209510] [<c0892664>] (platform_drv_probe) from [<c088fd98>] (really_probe+0x244/0x3d8)
[ 13.209523] [<c088fd98>] (really_probe) from [<c0890234>] (driver_probe_device+0x174/0x1d0)
[ 13.209534] [<c0890234>] (driver_probe_device) from [<c0890398>] (__driver_attach+0x108/0x130)
[ 13.209544] [<c0890398>] (__driver_attach) from [<c088d7c0>] (bus_for_each_dev+0x84/0xc4)
[ 13.209556] [<c088d7c0>] (bus_for_each_dev) from [<c088f5ac>] (driver_attach+0x2c/0x30)
[ 13.209566] [<c088f5ac>] (driver_attach) from [<c088ee7c>] (bus_add_driver+0x170/0x260)
[ 13.209578] [<c088ee7c>] (bus_add_driver) from [<c0891148>] (driver_register+0x84/0x118)
[ 13.209592] [<c0891148>] (driver_register) from [<c08925b8>] (__platform_driver_register+0x50/0x58)
[ 13.209608] [<c08925b8>] (__platform_driver_register) from [<bf0f1028>] (pruss_soc_bus_driver_init+0x28/0x1000 [pruss_soc_bus])
[ 13.209627] [<bf0f1028>] (pruss_soc_bus_driver_init [pruss_soc_bus]) from [<c0102f9c>] (do_one_initcall+0x50/0x234)
[ 13.209652] [<c0102f9c>] (do_one_initcall) from [<c01c3ffc>] (do_init_module+0x74/0x250)
[ 13.209665] [<c01c3ffc>] (do_init_module) from [<c01c63ac>] (load_module+0x2108/0x2778)
[ 13.209674] [<c01c63ac>] (load_module) from [<c01c6be0>] (sys_init_module+0x1c4/0x1e8)
[ 13.209683] [<c01c6be0>] (sys_init_module) from [<c01011d8>] (__sys_trace_return+0x0/0x10)
[ 13.209690] Exception stack(0xdb08ffa8 to 0xdb08fff0)
[ 13.209700] ffa0: be885cbc b579e008 b579e008 00002098 b6d715cc 98a66600
[ 13.209710] ffc0: be885cbc b579e008 00020000 00000080 00b6c120 00000003 00000000 00b6dcf8
[ 13.209717] ffe0: b6d81fac be885c38 b6d68420 b6c544b0
[ 13.209723] ---[ end trace 7e395ffd8d1acfda ]---
')
Does anyone know how to solve this?